• 대한전기학회논문지
• /
• 제40권12호
• /
• pp.1296-1301
• /
• 1991

This paper presents a hybrid image mode Galerkin method for the analysis of the transmission line structures suspended between infinite parallel ground planes. A Green's function that consists of numerically accelerated image mode terms is developed, which is used in boundary integral equation. Transmission lines of arbitrary cross section are analyzed using Galerkin's method. Two kinds of configurations of transmission lines are studied in sample problems.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.640-643
• /
• 1995

The internal standard method, which is widely used in chromatographic techniques, is applied to the size exclusion chromatography for the on-line determination of dn/dc value of the sample. This method is found to provide the dn/dc value with suitable accuracy in determining the absolute molecular weight and the molecular weight distribution of the polymers when a light scattering detector is used.

• KSBB Journal
• /
• 제16권5호
• /
• pp.459-465
• /
• 2001

본 연구에서는 생물공정에서 주요 기질로 이용되는 글루코오스와 전분을 온라인 모니터링 하기 이하여 GOD, AMG를 이용한 흐름 주입분석(Flow Injection Analysis : FIA) 기술을 개발하였고, 효소활성 변화를 비교, 고찰하였다. 특히, epoxy 고분자 담체에 고정화된 COD-FIA와 AMG/GOD-FIA 장치의 성능을 조사하였고, FIA의 조작온도, pH, 운반용액의 첨가제, 염 그리고 각종 신진대사물질의 고정화된 GOD, AMG의 활성에 대한 영향을 소형 반응기내 글루코오스와 전분의 농도 변화를 온라인 모니터링하였다. GOD-FIA에 의한 온라인 모니터링 결과는 오프라인 분석과 비교적 잘 일치하였으며, AMG/GOD-FIA에의한 전분 농도의 온라인 모니터링은 단일 효소 반응기를 사용한 경우 두 개의 효소 반응기를 사용한 경우보다 더 효과적임을 알 수 있었다.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.75-82
• /
• 2012

Compared to off-line, on-line word-of-mouth has fast dissemination speed and extensive effects based on interactive features. Moreover, in the age of Web 2.0, on-line media has made consumers evolve from simple purchasers to producers, who intervene into product manufacturing through on-line WOM. According to this, this study is conducted to clarify how consumer's prosumer propensity affects WOM in detail when purchasing fashion products on-line through website interactivity and perceived usefulness of WOM. The results are as follows. 1. Consumer's prosumer propensity is classified in four dimensions: the propensity to participate, the propensity to relate, the propensity to amuse and the propensity to create. 2. The sample has shown low prosumer propensity overall, and there were no gender differences. 3. Testing structural equation model, it was clarified that the higher the consumer's prosumer propensity, the higher the consumer's evaluation of website interactivity and thus the greater the WOM effect through its perception of usefulness. 4. There were some differences in the path of structural equation model according to consumer's prosumer propensity. From the results, it can be concluded that consumer's prosumer propensity is a key factor in the on-line WOM. Therefore fashion businesses should actively utilize consumer's prosumer propensity to apply their opinion in the product planning stage or use it as the means of company-friendly viral marketing.

• Journal of Information Technology Applications and Management
• /
• 제10권3호
• /
• pp.109-120
• /
• 2003

This paper proposes an e-business maturity model for small and medium-sized enterprises. The model consists of five maturity levels, which are on-line access, on-line business, matured on-line business, and full on-line business from least matured level to most matured level. The model can be used to assess e-business maturity level of individual enterprises. individual enterprise's maturity level can be assessed by examining sample check lists. Additionally, this paper summarizes the results of an application of the proposed model to a couple of small and medium-sized enterprises. This model can also be used to suggest what individual enterprises need to be upgraded towards higher maturity level.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.169-172
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which feeds foster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• 대한조선학회지
• /
• 제17권3호
• /
• pp.5-17
• /
• 1980

A basic procedure to design marine propellers by a curved lifting line theory was shown. By adapting discrete singularity method, it became possible to take into account of skew, rake and the contraction of slip stream in the early stage of preliminary design procedure. It is also shown that lifting line theory based on the discrete singularity method converges to a common solution obtained by induction factor method with a relatively small number of discrete elements. Lifting the blade geometry more accurately on the basis of hydrodynamic principles. A number of numerical results from lifting line calculation are presented for the purpose of comparison with the previous method, and with these results two sample designs are carried out, which are wake-adapted optimum and wake-adapted non-optimum propellers.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.955-960
• /
• 2003

본 논문에서는 이동 가능한 프로브(probe)가 있는, 종단된 동축 슬롯 선로(Coaxial slotted line)를 샘플 液의 흘더로 사용하여, 이동 통신 단말기 의 송신 주파수帶에서의 복소 유전율을 측정할 수 있는 시스템을 제작하였으며, 이를 이용하여 IEEE Std 1528-200X에 서 제안한 기준 액체들(Reference Liquids)의 복소 유전율을 측정 비교하여 봄으로써, 측정 시스템의 타당성을 조사하였다.

• 한국레이저가공학회지
• /
• 제10권1호
• /
• pp.11-17
• /
• 2007

We presented the proper laser processing conditions for the capillary line marking, which could be applied for the fabrication of injection needles. With changing the parameters such as lamp current, duty cycle and beam amplification factor of beam expander, we evaluated the processing performance considering amount of dross, processing efficiency and processed linewidth in the sample. We could carry out the proper line marking at the condition of 70% lamp current, duty cycle of 7-10% and 6-times amplification of beam diameter. To perform efficient line processing, the utilization of duty cycle of 12% at 80% lamp current was also preferred.

• 지식경영연구
• /
• 제18권3호
• /
• pp.37-62
• /
• 2017

Most of the managers know that knowledge sharing has to be precede to create knowledge which has competitive advantage of organizations. Until now the study on knowledge management placed emphasis on knowledge creation and knowledge sharing but there is few study on knowledge hiding. This study investigates the factors implicate on knowledge hiding intention and knowledge transfer intention of front-line workers and office workers and the implication on job performance of knowledge hiding intention and knowledge transfer intention. We collected sample data from 100 front-line workers and 250 office workers and verified hypotheses using Multiple Linear Regression. The result described that factors affect active and passive knowledge hiding intentions and factors affect knowledge hiding intentions of front-line workers and office workers are different.