• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.485-495
• /
• 2001

This paper presents a similarity solution for the directional casting of binary peritectic alloys in the presence of shrinkage-induced flow. The present model retains essential ingredients of alloy solidification, such as temperature-solute coupling, macrosegregation, solid-liquid property differences, and finite back diffusion in the primary phase. An algorithm for simultaneously determining the peritectic and liquidus positions is newly developed, which proves to be more efficient and stable than the existing scheme. Sample calculations are performed for both hypo- and hyper-peritectic compositions. The results show that the present analysis is capable of properly resolving the solidification characteristics of peritectic alloys so that it can be used for validating numerical models as a test solution.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.154-158
• /
• 1999

Volatile flavor compounds from perilla leaves were extracted and analyzed with different methods, head-space analysis (HS), simultaneous steam distillation and extraction (SDE) , and solvent extraction (SE), and to compare their efficiencies for quick analysis. Over 30 volatile compounds were isolated and 28 compounds were identified by GC/MSD. Major compound was perillaketone showing the compositions of which were 92% in SDE method, 86% in headspace analysis, and 62% in solvent extraction method. For quick evaluation of leaf flavor in perilla, it was desirable because the headspace analysis method had a shorter analyzing time and smaller sample amount than the other methods.

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.565-572
• /
• 2000

To quantitatively estimate mass contribution of long-range transported yellow sand, their sources should be separated independently from various local soil sources having similar elemental compositions. While it is difficult to estimate total mass loadings of pure yellow sand by traditional bulk analysis, it can be clearly solved by an particle-by-particle analysis. To perform this study, two yellow sand samples and three local soil samples were collected by a mini-volume sampler. These samples were three analyzed using a scanning electron microscope(SEM) equipped with an energy dispersive x-ray analyser (EDX) was used to obtain basic chemical information of individual yellow san particles. A total of 19 elements in a single particle were measured to develop a source profile with newly created homogeneous particle classes (HPCs) as chemical variables. The present study showed that the yellow sand samples as well as three local soil samples were characterized with reasonably well created HPCs. Finally the mass fraction of each HPC in each sample was calculated and then compared each other.

• 생태와환경
• /
• 제43권4호
• /
• pp.477-491
• /
• 2010

Benthic macroinvertebrates were collected two times from 116 sites at the $1^{st}{\sim}4^{th}$ order streams in forest areas in Gyungsang province in late spring and late summer. The sample sites belonged to slightly and moderately polluted states. When communities were classified by the Self-Organizing Map (SOM), the gradient was observed according to degree of pollution. Within clusters of slightly polluted sites, however, seasonality was further observed. Scrapers, gatherer-collectors, and filterer-collectors were abundantly observed in late spring while shredders appeared more in late summer. The number of predator species increased in late summer. Behavior types were mostly clingers in two seasons. Community compositions at the moderately polluted sites were not much differentiated in different seasons. Gatherer-collectors and burrowers were dominantly collected in both seasons.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.998-999
• /
• 2006

A new mathematical simulation technique for physico-mechanical properties of multi-component powder materials is proposed in this paper. The main advantage of the technique is that finite elements representing different components are placed into a common mesh and may exchange their properties. The output data are properties of material after sintering. The technique allows us to investigate the influence of each component of a material on the properties and distribution of properties inside the sample. The comparative analysis of materials with different compositions is based on simulation results that are well concordant with the results of the laboratory experiments.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.965-970
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450~150$0^{\circ}C$, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.525-527
• /
• 2009

This paper presents a study on the magnetic behaviour of selected doped SiAlONs with various compositions including Y, Yb, Sm, Gd, and Er. The resulting crystalline phases were confirmed by X-ray diffraction. The magnetic hysteresis data for the samples were collected at room temperature using a vibrating sample magnetometer. The study revealed that doped SiAlONs experience an appreciable level of magnetic hysteresis. Although the parameters corresponding to hysteresis loops in doped SiAlONs are less than those of common ferrites, their magnetic properties of SiAlONs may open up new potential areas of application as the host SiAlON ceramics have excellent structural properties.

• 기술사
• /
• 제35권4호
• /
• pp.62-67
• /
• 2002

Soondae is one of the traditional food in Korea. In order to develop the quality of Soondae, Mulberry leaf, safflower, DF-100 and Chitosan were added and their effect on the property change of Soondae during storage periods were investigated. There was no significant difference in proximate compositions among samples. TBA value of all sample increased as storage periods and TBA value of Soondae with DF-100 was lowest during storage periods. The content VBN of Soondae with was lowest during the storage periods. Microbiology was inhibited by adding the DF-100 and Chitosan at Soondae. Adding Chitosan of Soondae was highest point ati Sensory test. 18:1 content of lipid acid composition was the highest among samples.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.293-298
• /
• 2016

Thirty-eight spherules from the Antarctic ice sheet were analyzed using neutron activation analysis under two different conditions to investigate their origin. In almost all of these spherules, the contents of iron, cobalt, and manganese were determined to be 31% to 88%, 17 mg/kg to 810 mg/kg, and 0.017% to 7%, respectively. A detectable iridium content of 0.84 mg/kg was found in only one spherule, which was judged to be extraterrestrial in origin. A comparison of elemental compositions of the Antarctic spherules analyzed in this study with those of deep-sea sediment spherules and those of terrestrial materials revealed that most of the Antarctic spherules except for the sample in which iridium was detected could not be identified as extraterrestrial in origin.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.415-420
• /
• 2000

This paper describes a part of the results obtained in the process of the development of thin sound isolation sheets filled mineral compound powder with PVC. The raw materials used are pyrophillite, pottery stone and graphite. The physical properties such as the crystal structures, compositions, and specific gravities, etc. of raw materials are analyzed and discussed from a point of view of sound isolation material. From the analysis of experimental results, the particle size and the additive amount of mineral compound powder for manufacturing sample isolation sheets are decided. The resistant capability against fire of sound isolation sheets including mechanical, thermal and physical properties is tested. The transmission loss measuremenst of sound isolation sheets are performed using two-microphone method in an impedance tube. It is shown that the sound isolation capability of thin sheets has an excellent performance in excess of the object of development.