• Journal of Chest Surgery
• /
• v.15 no.2
• /
• pp.139-147
• /
• 1982

In case of segmental injury of trachea, the primary repair is very difficult, because the trachea is fixed in place without movability from the surrounding tissue. In addition to special anatomical situation of trachea, any ideal artificial prosthesis for tracheal replacement is not still appeared. Many authors proposed several procedures for the tracheal repair, but satisfactory results were few. Among the proposed procedures end to end anastomosis of trachea was noted superior when both ends of trachea could be approximated by mobilization of upper and lower injured trachea. The author's experiment was designed to determine the effect about decreased tension on trachea when the hyoid bone was released downward from the surrounding muscular structures. The experimental dogs were divided into two groups, suprahyoid releasing group (SH R) and control group of intact hyoid. SH R group was subdivided into two groups accord ing to he degree of tension. The experimental results were as follow; 1. SH R group: In view of X-ray, the distance between the angle of mandible and the displaced hyoid bone was lengthened downward. And it's range was from 1.3cm (38%) minimally to 2.7cm(108%) maximally. 2. Control group: The distance between the angle of mandible and hyoid was same in both pre and postoperation. As the result of this experiment study, the suprahyoid release technique seems to be the efficient method that enable of release the trachea maximally. And it should be expected that the SH R technique is applicable clinically.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1994-1998
• /
• 2005

Characteristic analysis of the depth measurement system with a laser, a camera and a rotating mirror has been done and the parameter calibration technique for it has been proposed. In the proposed depth measurement system, the laser beam is reflected to the object by the rotating mirror and again the position of the laser beam is observed through the same mirror by the camera. The depth of the object pointed by the laser beam is computed depending on the pixel position on the CCD. There involved several number of internal and external parameters such as inter-pixel distance, focal length, position and orientation of the system components in the depth measurement error. In this paper, it is shown through the error sensitivity analysis of the parameters that the most important parameters in the sense of error sources are the angle of the laser beam and the inter pixel distance. The calibration techniques to minimize the effect of such major parameters are proposed.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.177-182
• /
• 2001

This paper aims at evaluating HSDI diesel passenger cars introduction. The result of economic analysis after accounting for the life cycle cost per car shows a saving of 13,836 thousand won in fuel cost per diesel car assuming a life of 10 years and the annual travel distance of 20,000km. Assuming an average travel distance of 20,000km and a 10% increase in sales of diesel passenger car, the social benefit starts to accrue from the year 2002 and, in 2010, is estimated to be 154.1 billion won relative to the gasoline passenger car. The cumulative social benefit up to 2010 under the same assumptions is expected to reach 636.8 billion won.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1189-1195
• /
• 2007

Small gas bubbles are used in many environmental and industrial processes for solid-liquid separations or to facilitate heat and mass transfer between phases. This study examines some of the factors that affect the bubble volume and size processed in the EF (electroflotation) process. The effect of electrode material, NaCl dosage, current and electrode distance were studied. The results showed that the generated bubble volume with electrode material lay in: Pt/Ti ${\fallingdotseq}$ Ru/Ti ${\fallingdotseq}$ Ir/Ti > Ti electrode. The more NaCl dosage was high, the smaller bubble was generated due to the low electric power. Bubble generation was increased with increase of current. With the increase of NaCl dosage, bubble generation was increased at same electric power (16.2 W). Generated bubble volume was not affected by electrode distance. However, no clear trends in bubble size as a function of these parameters were evident.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.1-9
• /
• 1990

Landscape plants as attenuator of vehicular noise were basically experimented with 8 kinds of trees and shrubs at the university nursery, and checked the attenuating effects by the planted distances, species and sound frequencies. The experimental results are shown and sumarized as follows ; 1. Most plants showed the considerable noise attenuating function in the sound frequencies of 63Hz and 1,000Hz. Tall trees such as Juniperus chinensis var. kaizuka and Magnolia grandiflora showed better effects than shrubs or small trees such as Gardenia jasminoides, Osmanthus fragnance, Osmanthrs heterophyllus, Rhododendron indicum, Chamaecyparis obtusa 'Tetragona Aurea' and Pinus paruiflora in 63Hz frequency, but shrubs showed better effects in 1,000Hz. 2. Trees showed 6~8dB attenuation and shrubs 4~5dB regardless an increase of distance between sound source and receiver in 63Hz. 10 meter width of tree belt could reduce 10 more dB, but 5 meter of shrub belt showed the same effect in 1,000Hz. 3. Trees having more leaves and wider crown showed constantly increase of attenuation of sound by the distance in 1,000Hz, and distinct increase of attenuation were observed in 2,000 more Hz.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.7-12
• /
• 2018

Hydrochloric acid is a highly corrosive toxic substance and requires proper safety to minimize damage in case of leakage. Among the various risk-reduction facilities, the dike is a typical safety facility installed to protect the surrounding buildings and facilities by preventing the external spread of hazardous materials from the storage tank. In this study, the KORA program was used to assume leakage accident of hydrochloric acid storage tank. At this time, the extent of the damage effects of ERPG-2 were assessed for each of the three separation distance between the storage tank and the dike. The study found that the smaller the separation distance between the dike and the storage tank, the smaller the extent of damage caused by hydrochloric acid leakage, and the greater the impact of indoor conditions under the same conditions. Through this process, we are going to assist in selecting locations and installing facilities for new and existing businesses.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.69-75
• /
• 2009

This paper studies the aerodynamic performance that the vent mixer-new conceptual supersonic mixer-showed with its geometric characteristics. The hole is 2 mm with 2 mm's distance from the wall in case 1 and with no distance in case 2. In case 3 die hole is 1 mm. Case 1 and case 2 showed the same total pressure recovery ratio, of which the case 3 was lower than that. While cases 1-3 had the same reattachment length, the shear layer was thicker in cases 1 and 2 than in case 3. Within the recirculation zone, cases 1 and 2 had lower pressure loss and higher velocity gradient difference than case 3-they enhance mixing between air and fuel. Separation bubble which is developed by the inflow into the recirculation zone has a significant effect on the total pressure recovery ratio in the combustor. Also separation bubble influences pressure distributions and recirculation flows in the recirculation zone. Therefore, inflow rate of air into the recirculation zone mainly affects the performance of vent mixer.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.322-325
• /
• 2005

In order to make a doubly-cowed sheet metal effectively, the sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation in thickness. The developed process is an unconstrained forming process without holder. The experimental equipment has been set up with the roll set which consists of two pairs of support rolls and one center roll. In order to analyze process parameters in the incremental roll forming process for the application to doubly curved ship hull plate, the orthogonal array is adopted. From the FEM results, among the process parameters, the distance between supporting rolls in pairs along the direction of one principal radius of curvature as well as the forming depth is shown to influence the generation of curvature in the same direction significantly. That is, the other distance between supporting rolls in pairs which are not located in the same direction of one principal radius of curvature, does not have an significant effect on the generation of the curvature in that direction. Also, the forming load and torque from the FEM simulation are acceptable to the system development of the incremental roll forming process for the forming of ship hull plate.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1717-1722
• /
• 2021

Objective: Stroking calves during the postnatal period could effectively improve human-calf relationships. The objective of this study is to examine how daily calf stroking frequency during the postnatal period affects the establishment of human-calf relationships. Methods: Six calves were stroked by a trainer for 6 minutes once daily for 5 days after birth (D1). Six calves were stroked by a trainer for 3 minutes twice daily for 5 days after birth (D2). A further four calves were stared at but not stroked as the control group. The overall stroking or staring duration was the same for all groups, at 6 min/d and 30 min over 5 days. The tests for reactions to the stationary trainer in an unfamiliar environment and avoidance distance measurements for an approaching trainer were conducted at 1 month and 3 months after the treatment. Results: Calves in both stroking groups approached significantly closer to the stationary trainer, vocalized less, and looked at the trainer shorter than the control group at 1 month. However, at 3 months, there was no significant difference between the D1 and the control group, whereas the D2 approached significantly closer to the trainer and vocalized less, and looked at the trainer for a shorter time than the control group. For the avoidance distance, the trainer could approach closer to both stroking groups than the control at 1 month, however, there was no difference among groups at 3 months. Conclusion: Our results suggested that the difference in the calf stroking procedure affected the established human-calf relationships, even though the total stroking duration was the same for all stroked calves. It is likely to be more effective to stroke more frequently than intensively when the aim is to establish better human-calf relationships within limited labor time.