• 산업보건소식
• /
• no.47
• /
• pp.4-14
• /
• 1987

The authors investigated estimated amounts of salt intake of workers in manufacturing industries who consisted of 1,506 males in 6 manufacturing fields and 476 females in 3 fields in Pusan area using filter paper method which was developed recently. The obtained results were as follows; 1. Mean excretion amounts of urinary electrolytes were Na 200.7 mEq/l, K 44.2 mEq/l and Cr 1.12g/l in male and Na 190.2 mEq/l, K 44.0 mEq/l and Cr 1.10g/1 in female. 2. Mean daily salt intake amounts were 19.4g in male and l5.3g in female. 3. By the fields of manufacturing industries in male, workers in metal product field had the highest salt intake as 20.0g, and the following were workers in food and tobacco field as 19.7g, workers in textile, wearing apparel and leather field as 19.6g in order. 4. In female, workers in textile, wearing apparel and leather field had the highest salt intake as l5.7g and the next were workers in chemical, coal and rubber products field as l5.0g and workers in fabricated metal products, machinery and equipments as l4.3g, respectively.

• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.793-798
• /
• 2017

Salt is an essential ingredient for cheese production, and it influences various aspects of cheese, including the shelf life, enzyme activity, flavor, casein hydration, and microbial proliferation during ripening. Several consumers avoid cheese with high salt content, mainly due to health problems such as hypertension, cardiovascular disease (CVD), stroke, and heart attacks. Salt has been commonly used for several purposes in cheese production, including for obtaining the required flavor and texture, for its preservative properties, and as a taste enhancer. However, salt usage has been opposed by the public and governmental bodies, who have been advised by health authorities that salt should be reduced or avoided in cheese for healthier life. However, salt replacement or reduction in cheese manufacturing requires formulation of intensive strategies. This review provides information about several strategies and innovations for reduction and replacement of salt in cheese manufacturing without seriously affecting the quality, microbial safety, and sensory properties of cheeses.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.183-189
• /
• 2004

Deep ocean water is located in the sea deeper than 200m. At such depth the solar light does not reach, photosynthesis is not performed and nutrition salt is not consumed. Therefore, campared with surface water, Deep Sea Water contains more nutrition salt, such as nitrogen and phosphor. Moreover, it has the good balance of minerals. This Research is primary attempt for apply deep sea water to food industry. New type of mineral salt manufacturing system was developed and high levels of Ca, K, Mg detected from the salt analysis.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.48-53
• /
• 2002

The HACCP (hazard analysis critical control point) concept becomes an important aspect of Good Manufacturing Practices (GMP) in safe food production. The HACCP plan was developed with food safety objective. The authors already carried out hazards analysis on Changran Jeotgal manufacturing process in a previous report. In this study we developed a HACCP plan on the manufacturing process of Changran Jeotgal. We could decide two CCPs those were salt concentration and eliminations of foreign materials before packaging. Foreign materials should be certainly checked out with laser detector just before packaging. Salt should be maintained more than $8\%$ to inhibit pathogenic bacteria in end product. On the Jeotgal process free water is removed after salting and Jeotgal is seasoned with several subsidiary materials such as com syrup. In result end products have $8\%$ salt with water activity 0.82. Most bacteria are inhibited but some can live in this condition. Materials on the working may be contaminate by pathogens, chemicals or physical hazards. It will be decreased by SSOP (standard sanitary operating program). The SSOP needed in Jeotgal plants is nearly same as other general food manufacturing plants but essential to fulfill HACCP program.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.61-65
• /
• 2007

In this research, we have developed a manufacturing process for seawater salt by horizontal spray drying technique using the deep ocean water and seaweed(sea tangle). Deep ocean water, strong acidic electrolyzed water and strong alkaline electrolyzed water were used as extraction solvent of seaweed. Sodium content in seaweed extract solution by strong alkaline electrolyzed water was 1.63(mg/g), which was 3.5 times lower than of seaweed extract by strong acidic electrolyzed water. Major mineral content(Na, K, Ca) in seawater salt by deep ocean water were higher than strong acidic electrolyzed water and strong alkaline electrolyzed water. On the contrary, Mg contents in seawater salt by deep ocean water were lower than strong acidic electrolyzed water and strong alkaline electrolyzed water. Based on the results of seawater salt production using seaweed, it is possible to make law-salt efficiently.

• YAKHAK HOEJI
• /
• v.47 no.3
• /
• pp.135-141
• /
• 2003

The majority of table salts are bay salts and chemical salts. However, chemical salts are known to have a different composition in biological electrolytes and quality of bay salts are getting worse due to the increasing seawater contamination. These facts may have led to the increasing usage of various health-promoting salts. Bamboo salt was introduced in 1986 as a solution to replace table salts to eliminate those detrimental effects, to promote general health and to treat diseases. Although all bamboo salts from different manufacturers have been used for the same health and medical purposes, each manufacturer utilizes different manufacturing process. The ICP analysis was used to study the changes of elemental contents in a bamboo salt during the manufacturing steps as well as these contents in various bamboo salts and other salts. After the first step, contents of Li and Sr in the bamboo salt were increased in comparison with those in the raw material, bay salt. As the next steps continued, contents of K, Ca and Ba were continuously increased. At the completion of the final step, contents of Mg and P were decreased and those of Cu, Mn and Mo were gradually increased. Bamboo salts contained lower contents of Mg, Al, B, and P, but higher contents of K, Ca, Fe, Cu, Mn, Zn, Li, Ba, Sr and Mo than bay salt.

• Food Science and Industry
• /
• v.49 no.2
• /
• pp.18-24
• /
• 2016

Sodium chloride (NaCl) is a very important as one of major food ingredients in food industries. Recently, as the potential risk of adult diseases such as hypertension by overingestion of sodium, health authorities of many countries are executing policies for the reduction of sodium to suppress the overingestion of sodium by intake of NaCl. As general ways, the replacement of NaCl with either alternative salts, such as solar salts and minerals, for examples calcium, magnesium, potassium, lactic acid, and so on, and the addition of flavor enhancers were used to reduce the contents of sodium in foods. Recently, controls of particle size of sodium chloride or release point are emerging as new salt-manufacturing technologies for the sodium reduction. Upon reducing NaCl in foods it is important to develop practically adaptable technologies on the basis of the consideration of the unique functions of NaCl in foods, in particular effects on rheological characters, function as a humectant, shorten shelf life time, and so on.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.90-95
• /
• 2023

This study aimed to develop low-salt seasoned Gim (김) with new functionality to meet the diversification of the export market and consumer demand for Gim, which is one of the four major seafood products in Chungcheongnam-do province. Spirulina, a microalgae containing essential amino acids, vitamins, and minerals, is known to have antioxidant components such as phycocyanin. Therefore, to determine the suitability of spirulina as a seasoning material, we conducted seaweed. It can be used as a substitute for seasoning salt in the development of low-salt seasoned laver with enhanced functionality.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.70-79
• /
• 2020

This paper describes a comparative study of characteristics of probabilistic design using various reliability analysis methods in the structure design of an automatic salt collector. The thickness sizing variables of the main structural member were considered to be random variables, including the uncertainty of corrosion, which would be an inevitable hazard in the work environment of the automatic salt collector. Probabilistic performance functions were selected from the strength performances of the automatic salt collector structure. First-order reliability method, second-order reliability method, mean value reliability method, and adaptive importance sampling method were applied during the reliability analyses. The probabilistic design performances such as reliability probability and numerical costs based on the reliability analysis methods were compared to the Monte Carlo simulation results. The adaptive importance sampling method showed the most rational results for the probabilistic structure design of the automatic salt collector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.128-133
• /
• 2020

This study was conducted to demonstrate the manufacturing process for producing high-quality solar salt. The design criteria of the manufacturing process, which was studied in a previous study, was applied to an actual manufacturing system to evaluate its performance. The design factors applied were the drying air temperature and the temperature of the washing water. They were 100℃ or less and 10℃ or less, respectively. Two standards were applied to the process performance evaluation. Standard (I) was the international food standard for solar salt, and standard (II) was the quality standard for high-quality solar salt production. The main quality evaluation items were the moisture content and salinity, and the color characteristics were also measured (p<0.05). The manufacturing process of solar salt consisted of five steps, and the quality change was measured for each step. The measured quality was appropriate to the standard (I) from the third-step process. In addition, the quality of the high-quality solar salt was suitable for the standard (II) from the fourth-step process. Therefore, the performance of the proposed solar salt production process met international standards. The improvements in the production of high-quality solar salt will improve international competitiveness in the future.