• Title/Summary/Keyword: salt analysis

Search Result 1,391, Processing Time 0.024 seconds

Analysis of newly designed CDI cells by CFD and its performance comparison

  • Kwon, Se Hwan;Rhim, Ji Won
    • Membrane and Water Treatment
    • /
    • v.7 no.2
    • /
    • pp.115-126
    • /
    • 2016
  • In this study, computational fluid dynamics (CFD) analysis was conducted to investigate the flow pattern and to find the occurrence of dead zones in an existing capacitive deionization (CDI) cell. Newly designed cells-specifically designed to avoid dead zones-were analyzed by CFD in accordance with the flow rates of 15, 25 and 35 ml/min. Next, the separation performances between the existing and newly designed cell were compared by conducting CDI experiments in terms of salt removal efficiency at the same flow rates. Then, the computational and experimental results were compared to each other. The salt removal efficiencies of the hexagon flow channel 1 (HFC1) and hexagon flow channel 2 (HFC2) were increased 88-124% at 15 ml/min and 49-50% at 25 ml/min, respectively. There was no difference between the existing cell and the foursquare flow cell (FFC) at 35 ml/min.

Characterization of vanadium carbide coating deposited by borax salt bath process

  • Aghaie-Khafri, M.;Daemi, N.
    • Advances in materials Research
    • /
    • v.1 no.3
    • /
    • pp.233-243
    • /
    • 2012
  • Thermal reactive diffusion coating of vanadium carbide on DIN 2714 steel substrate was performed in a molten borax bath at $950-1050^{\circ}C$. The coating formed on the surface of the substrate had uniform thickness ($1-12{\mu}m$) all over the surface and the coating layer was hard (2430-2700 HV), dense, smooth and compact. The influence of the kinetics parameters, temperature and time, has been investigated. Vanadium carbide coating was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and X-ray diffraction analysis (XRD). The corrosion resistance of the coating was evaluated by potentiodynamic polarization in 3.5% NaCl solution. The results obtained showed that decrease of coating microhardness following increasing time and temperature is owing to the coarsening of carbides and coating grain size.

Descriptive Sensory Characteristics of Beef Jerky Prepared Different Methods

  • Lee, J.H.;Iv, Edgar-Chambers;Chambers, Delores-H.;Chin, K.B.;Kim, R.Y.;Chun, S.S.;Oh, J.S.
    • Proceedings of the Korean Journal of Food and Nutrition Conference
    • /
    • 2004.07a
    • /
    • pp.49-49
    • /
    • 2004
  • Beef jerky is a traditional salted or soysauce-added and dried Korea meat product. Jerky is made from loins which is thin sliced, curing salt(soysauce-added), smoked and dried. The purpose of this study was to investigate the effects curing salt soy sam and/or smoking. A lexicon for describing the texture and flavor of beef jerky were developed. The intensity of a vatiety of texture, flavor, and mouth feel properties was characterized for beef jerky. A highly trained descriptive sensory panel identified, defined and referenced 17 attributes for beef jerky. (omitted)

  • PDF

Characteristics of Son Concentrations of PM2.5 Measured at Gosan: Measurement Data between 1998 and 2002 (고산에서 측정한 PM2.5 이온 농도 특성: 1998~2002년 측정자료)

  • 김나경;김용표;강창희;문길주
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.19 no.3
    • /
    • pp.333-343
    • /
    • 2003
  • The aerosol ionic composition of P $M_{2.5}$ measured at Gosan, Jeju Island, Korea, for 4 years between March 1998 and February 2002 are presented and discussed. The annual mean concentration of non- sea-salt sulfate (nss -S $O_4$$^{2-}$) and ammonium (N $H_4$$^{+}$) ions are high (0.094 $\mu$eq/㎥, and 0.085 $\mu$eq/㎥, respectively). Also, nss-S $O_4$$^{2-}$ and N $H_4$$^{+}$ show high correlation (0.892). The concentrations of most ions are high in springtime. As the result of factor analysis, Gosan area mainly affected by sea-salt, anthropogenic species, and crustal species.ies.

Retention of sulfate and chloride ions in commercially available tubular membranes

  • Qadir, Danial;Mukhtar, Hilmi;Keong, Lau Kok
    • Membrane and Water Treatment
    • /
    • v.8 no.4
    • /
    • pp.369-380
    • /
    • 2017
  • Performance evaluation of four commercially available tubular membranes (AFC 80, AFC 30, PU 608, ES 404) was accomplished in self-assembled membrane testing unit. Effects of varying transmembrane pressure, feed concentration and anion type were investigated. Aqueous solutions of salts such as calcium chloride, calcium sulfate, tin chloride and tin sulfate were prepared for this study. It was noted that the investigated parameters e.g., pressure and concentration had significant effects on membrane's performance. Nevertheless, anion type effectively played its role in the rejection of salts since salt having SO4-2 anions had a better rejection than the salts containing Cl-1. It is observed that rejection was dominated by Donnon exclusion for strongly charged nanofiltration membranes whereas for weakly charged ultrafiltration membranes, size exclusion was the key mechanism to reject the ions.

Sulfur Dioxide, Mineral Contents and Physicochemical Properties Generated during Manufacture of Bamboo Salt (죽염 제조공정에 따른 이산화황, 미네랄 함량 및 이화학적 특성)

  • Kim, Hag-Lyeol;Lee, Seong-Jae;Lee, Jung-Hee;Kim, In-Cheol
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.8
    • /
    • pp.1248-1256
    • /
    • 2014
  • The purpose of this study was to investigate the mechanisms of behind $SO_2$ formation and elevated cause of reducing power in purple bamboo salt (PBS) along with an analysis of physicochemical properties, content of sulfur compounds, oxidation reduction potential (ORP), mineral contents of salt type (MSS, mudflat solar salt; BS, bamboo salt), and addition of raw bamboo (RB). $SO_2$ content of 630 ppm was detected in PBS. $SO_2$ was not detected in MSS, BS, or RB, whereas $SO_2$ (782 ppm) from $K_2SO_4$ was detected after heating a NaCl, KCl, $MgCl_2$, $MgSO_4$, MgO, $CaCl_2$, $K_2SO_4$, and $FeSO_4$ with RB. $SO_2$ content of BS increased with baking time, and it originated from BSRB1 (13.88 ppm) to BSRB4 (109.13 ppm). $SO_3{^{2-}}$ originated only from MSSRB4 and BSRB2~BSRB4. Sulfate ion content decreased along with increasing $SO_2$ and sulfite ion contents. ORP increased with baking time of MSS and BS, and it was present at higher levels in BSRB4 (-211.40 mV) of BS than MSS. Insoluble content was higher in BS than MSS. Further, Ca, K, and Mg ion contents decreased in MSS and increased in BS with baking time. BSRB4 had 1.4 fold higher levels of Ca, 1.5 fold higher levels of Mg, and 1.8 fold higher levels of K than BS. Li, Al, Mn, Fe, and Sr in MSS as well as Al, Fe, and Ni in BS increased with baking time. Anions (Cl, $NO_3$, and Br) and heavy metals (Pb, Cd, Hg, and As) between MSS and BS were not significantly different. These results suggest that the reducing power of BS was due to $SO_2$ and sulfite ion. To increase the amounts of these compounds and reducing power, higher melting temperature and longer baking time are necessary along with BS, which is created by the addition of RB to roasted salt.

Distribution and Identification of Halophilic Bacteria in Solar Salts Produced during Entire Manufacturing Process (천일염 생산공정별 미생물 분포 조사 및 호염미생물 동정)

  • Na, Jong-Min;Kang, Min-Seung;Kim, Jin-Hyo;Jin, Yong-Xie;Je, Jeong-Hwan;Kim, Jung-Bong;Cho, Young-Sook;Kim, Jae-Hyun;Kim, So-Young
    • Microbiology and Biotechnology Letters
    • /
    • v.39 no.2
    • /
    • pp.133-139
    • /
    • 2011
  • In this study, we determined the changes in microbial numbers in solar salts according to the manufacturing process and storage duration. The salt samples were harvested from salt farms in Shinan (area 2) and Yeonggwang (area 1). They were serially diluted ten-fold and then placed on 4 kinds of cultivable media (mannitol salt agar, eosin methylene blue, plate count agar, and trypticase soy agar). After incubation, we obtained 62 halophilic isolates from the salt samples. Coliform and general bacteria were not detected in all salt samples. By 16S rRNA sequencing analysis, we found 12 kinds of halophilic bacteria belonging to the genera Halobacillus, Halomonas, Bacillus, Idiomarina, Marinobacter, Pseudoalteromonas, Vibrio, Salinivibrio, Virgibacillus, Alteromonas, Staphylococcus and some un-known stains. In our study, we discovered two novel species that have a 16S rDNA sequence similarity below 97%.

Changes in Nutritional Components of Toha-jeot with Wheat Bran during Fermentation (밀기울을 첨가한 토하젓의 숙성과정 중 영양성분의 변화)

  • 박영희;박복희
    • Korean Journal of Human Ecology
    • /
    • v.3 no.2
    • /
    • pp.77-89
    • /
    • 2000
  • In this study, to activate the industrialization and to improve the quality of Toha-jeot by shortening the fermentation period, we investigated the changes in the nutritional components of Toha-jeot. salt-fermented Toha shrimp( Caridina denticulata denticulata $D_{E}$ $H_{AAN}$) which was salted with a low-salt group and high-salt group during fermentation. In this experiment. there are four groups of Toha-jeot which were manufactured with 15% ratio of common salt: the first group containing 2% wheat bran (w2%-L). the second high-salt group containing 2% wheat bran( w2%-H) , the third low-salt group containing 4% wheat bran (w4%-L) and the last high-salt group containing 4% wheat bran(w4%-H). These four groups were refrigerated at 4${\pm}$1$^{\circ}C$ and then taken out for analysis at three month intervals during 9 month. Among the free amino acid contents in Toha-jeot, 22 kinds were detected. 6 month after the fermentation when the quantity of the amino acid contents in Toha-jeot is highest, ornitine, glutamic acid, leucine. alanine. lysine and valine occupy the majority, in the order of abundance. In cases of nucleotides. 6 month after the fermentation. from the groups w2%-L, w2%-H and w4%-L, inosine and IMP were not detected. and hypoxanthine, AMP, ADP were detected but 9 month after the fermentation ADP was not detected. The main constituents of fatty acid were as follows : (a) from w2%-L, w2%-H, 6 month after the fermentation. $C16:0$, $C12:0$, $C18:1$, $C18:3$, and $C16:1$. (b) from w4%-L. 6 month after the fermentation, $C18:3$, $C16:0$, $C12:0$ and $C18:1$. (c) from W4%-H, $C16:0$, $C12:0$, $C18:3$ and $C18:1$. In case of mineral contents. Na, Ca. K. Mg, Fe. Zn, Mn and Cu were detected according to the magnitude of the quantity. From the group w4%-H, high quantity of Na was detected during the total fermentation period. In case of color value, from the groups w2%. the values of L. a. b were highest after 6 month fermentation and were decreased after 9 month fermentation, while from groups w4%, the values of L, a, b were gradually decreased after 3 month fermentation.ion.

  • PDF