• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.283-284
• /
• 2018

• 기본간호학회지
• /
• 제22권2호
• /
• pp.180-189
• /
• 2015

Purpose: The purpose of this study was to identify the types of errors that occurred and were recovered in a simulated transfusion scenario by nursing students. Methods: Twenty-eight teams of a total of 89 nursing students participated in a transfusion simulation using a high fidelity simulator. Data were collected by observing rule based errors and built in errors recovered according to the framework of Eindhoven model. Reflective journaling was used to identify perceived safety-threatening errors and commitment to improvement. Data were analyzed using descriptive statistics. Results: All teams committed the rule based errors in the scenario. The most common errors occurred in the coordination category related to communication with physician. Most of students perceived the transfusion reaction as a safety-threatening error. Conclusion: The findings indicate that students lack patient safety competence. The simulation training to decrease errors and improve safe practice provides nursing students with an effective strategy to develop patient safety competence.

• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.77-86
• /
• 2001

An operational strategy for inventory control on finished goods in the distribution system has been given attention to many enterprises and many studies regarding this field have been done and is also on-going currently. Many of these studies represented a large scale distribution network with a unified formulation by using defined symbols. These methods have provided the systematic approach of the distribution network but they are impossible to applying the reality system due to not considering the service rate of demand and treating the shortage of inventory. In order to overcome these unrealistic problems, the novel safety stock policy of responding to customers' inventory distribution network is suggested. this paper explores the transportation between Central Distribution Center(CDC) and Regional Distribution Center(RDC). Especially, the relation of transportation cost between CDC and RDC and cost of inventory control according to safety inventory with service level are emphasized. We could obtain the good results of this study by determining the optimal safety stock considering the various variables and constraints.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.432-438
• /
• 2022

This study focuses on improving quality management system of naval ships to enhance safety. Recently, there were problems caused by the lack of quality management system when building Korea naval ships. Foreign naval ships are designed and built through certification by professional organizations in the commercial sector to reduce budget and enhance ship safety. Merchant ships are designed, built, operated and maintained by the organizations in accordance with the Ship Safety Act. When naval ships are exported, the ordering country requires the certification from the international classification to ensure the safety and reliability of ships. Through this study, as a method of improving the quality management system of naval ships, design verification, equipment certification and construction survey using expertise of the organizations are proposed when designing and building the naval ships.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.10-15
• /
• 2012

The design of automobile occupant seat belt system has been studied by using MADYMO. Based on the FMVSS 208 (Federal Motor Vehicle Safety Standards 208) and the USNCAP (United States New Car Assessment Program) regulations, seat belt design parameters were chosen for the design improvement to the 5th percentile female dummy: limit force of load limiter, time to fire of shoulder belt, inlet length of shoulder belt, inlet length of lap belt. The design of experiment method was employed to optimize the design parameters of passenger seat belt. Range of injury probability due to the change of H-point position was estimated by the simulation.

• Steel and Composite Structures
• /
• 제13권1호
• /
• pp.47-70
• /
• 2012

To enhance cable stiffness, this paper proposed a combined application of carbon fiber reinforced polymers (CFRP) and steel materials, resulting in a novel type of hybrid stay cable system especially for the cable-stayed bridges with main span lengths of 1400~2800 m. In this combination, CFRP materials can conserve all their advantages such as light weight and high strength; while steel materials help increase the equivalent stiffness to compensate for the low elastic modulus of CFRP materials. An increase of the equivalent stiffness of the hybrid stay cable system could be further obtained with a reasonable increase of its safety factor. Following this concept, a series of parametric studies for the hybrid stay cable system with the consideration of stiffness and cost were carried out. Three design strategies/criteria, namely, best equivalent stiffness with a given safety factor, highest ratio of equivalent stiffness to material cost with a given safety factor, and best equivalent stiffness under a given cost were proposed from the stiffness and cost viewpoints. Finally, a comprehensive design procedure following the proposed design strategies was suggested. It was shown that the proposed hybrid stay cable system could be a good alternative to the pure CFRP or traditional steel stay cables in the future applications of super long span bridges.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.696-704
• /
• 2009

In this paper, the flow characteristics through an industrial safety relief valve used to protect the crankcase room in a large-sized marine engine have been numerically investigated using the moving-mesh strategy. With the room pressure higher than the cracking one, the spring-loaded disc becomes open and then the air in the room blows off into the atmosphere, resulting in the reduction of the room pressure and then the shutoff of the disc. Numerical simulations are performed on the compressible air flow through the relief valve (${\phi}160mm$) with the initial room pressure (0.11 bar or 0.12bar) higher than the cracking one (0.1 bar). The numerical method has been validated by comparing the results with the empirical ones. Results show that the disc motion and flow characteristics can be successfully simulated using the moving-mesh strategy and depend strongly on the spring stiffness and the flow passage shape. With increasing spring stiffness, the maximum disc displacement decreases and thus the total disc-opening time also decreases. In addition, the flow passage shape makes a significant effect on the velocity and direction of the flow.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.207-216
• /
• 2014

This paper revisits the Fukushima accident to draw lessons in the aspect of nuclear safety considering the fact that the Fukushima accident resulted in core damage for three nuclear power plants simultaneously and that there is a high possibility of a failure of the integrity of reactor vessel and primary containment vessel. A brief review on the accident progression at Fukushima nuclear power plants is discussed to highlight the nature and characteristic of the event. As the severe accident management measures at the Fukushima Daiich nuclear power plants seem to be not fully effective, limitations of current severe accident management strategy are discussed to identify the areas for the potential improvements including core cooling strategy, containment venting, hydrogen control, depressurization of primary system, and proper indication of event progression. The gap between the Fukushima accident event progression and current understanding of severe accident phenomenology including the core damage, reactor vessel failure, containment failure, and hydrogen explosion are discussed. Adequacy of current safety goals are also discussed in view of the socio-economic impact of the Fukushima accident. As a conclusion, it is suggested that an investigation on a coherent integrated safety principle for the severe accident and development of innovative mitigation features is necessary for robust and resilient nuclear power system.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.107-116
• /
• 2008

Nowadays, BSC presented by alpan is observed by many enterprises and is being operated gradually. BSC includes non-financial factor as well as financial factor in performance assessment and it is a tool that will be able to evaluate even strategy of long-term view. In point of performance management, BSC brings in relief importance on non-financial performance as well as financial performance and it shares with viewpoint of 4 things of financial viewpoint, customer viewpoint, internal process view point, learning and growth viewpoint. then these make an array with vision and strategy of organization by causal relationship, it presented necessity of performance control on organization as center on KPI of inner of each viewpoint. Thus, study on measures and control of management performance is progressed actively and is accomplishing much development. This study is aimed at calculation of weight that is able to reflect its importance about AHP on KPI of each viewpoint. The purpose of this study is to present desirable performance measurement model and to give a weight in consideration of working-level character.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.51-59
• /
• 2011

The objective of this study is to develop an evaluation model for the National highway risky areas. Thus, for the purposes of doing this, National highway risky area evaluated targeting to provide determination ranking and suggesting rival-superiority factors as well as under-inferiority factors in ten National highway risky areas. This study developed for modules of risky areas evaluation, using fuzzy set theory and analytic hierarchy process for evaluation model of National highway risky area in transport environment. The preceding studies assess risk analysis through analysis of causal relationships by National highway safety sector not only handles rating scale development suitable for assessment area by referring to accident frequency model but also geometric structures model. As result of this study, this model of Fuzzy Ahp Risk Analysis (FARA) apply for programmable design in real time processing through easily derive strategy for improvement activities to provide a decision-making effectively. Furthermore, this study contributes frame for improvements of National highway construction for renovation's priority strategy as well as future's policy schemes.