• 한국안전학회지
• /
• 제27권5호
• /
• pp.196-202
• /
• 2012

An industrial safety helmet primarily intended to protect the wearer's head. It is to prevent or reduce the danger due to flying or dropping objects, falling and prevent the danger due to an electric shock given to the head. However, thermal discomfort of the head is one of the main complaints in the case of wearing safety helmet. Ventilation holes are not allowed in safety helmets on domestic regulations except for industrial safety helmets which are to protect wearer's head against flying or dropping objects. This paper is to produce the need for enlargement of allowing on ventilation holes' regulation to class B. This study reviewed foreign standards' regulations on ventilation holes of safety helmets. Some standards recommend that ventilation may be improved when fresh air is able to enter the helmet around its lower edge and to exit via holes in the helmet located in the upper one third of the helmet. And in the experiments, relationships of ventilation holes and the temperature over the head are analyzed. The experimental results show that the cooling effect of ventilation holes in the upper one third of the helmet is meaningful.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.7-13
• /
• 2017

As automotive industry develops, the demand for increasing traffic safety is growing. Lots of researches about vehicle convenience and safety technology have been implemented. Now, the autonomous driving test is being conducted all over the world, and the autonomous driving regulations are also being developed. Autonomous vehicles are being commercialized, but autonomous vehicle safety has not been guaranteed yet. This paper presents scenarios that assess the safety of autonomous vehicles by identifying the minimum requirements to ensure safety for a variety of situations on highway. In assessing driving safety, seven scenarios were totally selected. Seven scenarios were related to lane keeping and lane change performance in certain situations. These scenarios were verified by analyzing the driving data acquired through actual vehicle driving. Data analysis was implemented via computer simulation. These scenarios are developed based on existing ADAS evaluation and simulation of autonomous vehicle algorithm. Also Safety evaluation factors are developed based on ISO requirements, other papers and the current traffic regulations.

• 한국조리학회지
• /
• 제13권4호
• /
• pp.243-255
• /
• 2007

This study carried out a survey which is related to food safety in food business in order to find out interest in food safety and to get awareness of food safety in food business. The research was done through surveys for the people in the Seoul Metropolitan area. 232 out of 250 answers were used in analyzing frequency, factor, $x^2$-test, and t-test through SPSS Win 12.0. There are three main factors of food safety in food business. The first is food borne illness(65.9%), the second is trans-fat(63.4%), and the third is remained agrichemicals(58.5%). Basically, women consider food safety more seriously than men do, and married women than unmarried women. Women were unsatisfied with the government's regulations than men were, married women than unmarried women. Women more consider awareness of food safety than men do, married women than unmarried women. Overall, unmarried women worried about their eating stuff seriously than any other group does. People consider food safety first, more and more these days, therefore, we need special management programs and regulations to focus on food safety and to support many studies about food safety.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.83-93
• /
• 2021

Objectives: 'Confined space' was only defined in the Safety and Health Regulations as a place where oxygen deficiency and hydrogen sulfide must be dealt with at the time of the initial enactment (1982). The danger of fire and explosion were added in 2003. We will compare and review the regulations related to confined space work under the current safety and health rules alongside regulations in other countries and prepare a plan to improve the system through enhanced clarity and execution. Methods: In a comparison of systems for the prevention of suffocation in confined spaces in major countries (Germany, United States, Japan) different concepts of the definition of confined spaces in different countries apparently due to differences in each country's legal implementation system, accident analysis methods, the status of safety and health implementation in workplaces, the precautions against actual confined space work, and the definition of confined spaces were found to be not much different between Korea and the other foreign countries. Results: In the case of Germany and the United States, a confined space is defined as a contextual concept rather than a place, so more careful attention is needed from operators or enclosed space managers as it is often necessary to judge the actual workplace. In the case of Korea and Japan, the interior of the place is mainly defined as a place, especially in the case of Japan, which concentrates on oxygen deficiency and hydrogen sulfide poisoning. Conclusions: For measures to improve regulations on the prevention of suffocation accidents in Korea, I would like to propose three major measures to improve the system in the rules on domestic industrial safety and health standards. It is necessary to prepare and provide a guide to ensure that the 18 types of confined spaces currently defined as confined spaces are clearly understood by field management supervisors or workers.

• 한국안전학회지
• /
• 제37권3호
• /
• pp.52-59
• /
• 2022

Conventionally, all the unsafe acts by human beings in relation to industrial accidents have been regarded as unintentional human errors. Exceptionally, however, in the cases with fatalities, seriously injured workers, and/or losses that evoked social issues, attention was paid to violating related laws and regulations for finding out some people to be prosecuted and given judicial punishments. As Heinrich stated, injury or loss in an accident is quite a random variable, so it can be unfair to utilize it as a criterion for prosecution or punishment. The present study was conducted to comprehend how categorizing intentional violations in unsafe acts might disrupt conventional conclusions about the industrial accident process. It was also intended to seek out the right direction for countermeasures by examining unsafe acts comprehensively rather than limiting the analysis to human errors only. In an analysis of 150 industrial accident cases that caused fatalities and featured relatively clear accident scenarios, the results showed that only 36.0% (54 cases) of the workers recognized the situation they confronted as risky, out of which 29.6% (16 cases) thought of the risk as trivial. In addition, even when the risks were recognized, most workers attempted to solve the hazardous situations in ways that violated rules or regulations. If analyzed with a focus on human errors, accidents can be attributed to personal deviations. However, if considered with an emphasis on safety rules or regulations, the focus will naturally move to the question of whether the workers intentionally violated them or not. As a consequence, failure of managerial efforts may be highlighted. Therefore, it was concluded that management should consider unsafe acts comprehensively, with violations included in principle, during accident investigations and the development of countermeasures to prevent future accidents.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.137-147
• /
• 2013

Objectives: This study was conducted in order to evaluate the limitations of the regulations on the safety and health standards for special management materials(SMM) under the Industrial Safety and Health Act in Korea. Methods: Hazardous chemicals management systems in Germany(Hazardous Substances Ordinance), the UK(Control of Substances Hazardous to Health Regulations), Japan(Ordinance on Prevention of Hazards due to Specified Chemical Substances) and Korea(Regulation of Occupational Safety and Health Standards, ROSHS) were investigated and compared in terms of 14 items. Results: Among the 14 items, we eventually found seven items which should be amended: 1) definition and scope, 2) general duties clause, 3) principles of management, 4) preventive measures, 5) control measures, 6) risk assessment, and 7) record keeping. The principal limitations of Korean regulations in comparison with those of other countries were that there were no preventive measures such as substitution, and no principles of good practices for the control of exposure to SMM. In terms of control measures, there were no regulations on suitable workplace design, reducing the number of exposed workers, reducing the level and duration of exposure, and reducing the quantity of hazardous substances in ROSHS. Conclusions: Based on the results of this study, ROSHS should be complemented with preventive measures and the principles of management related to SMM. According to the suggestions, an employer who deals with SMM should preferably consider the possibility of substitution and perform substitution so far as is reasonably practicable.

• 한국철도학회논문집
• /
• 제14권4호
• /
• pp.333-340
• /
• 2011

본 논문은 유럽 TSI와 국내철도차량안전기준에 정의된 건널목 충돌사고시나리오에서 요구하는 성능의 대형 변형체 장애물의 유한요소 모델에 대하여 2가지 종류의 모델을 개발하여 한국형 분산형 고속철도 차량에 적용하고 평가하였다. 규정에서 요구하는 대형 장애물은 기존 강체모델에서 현재의 변형체모델로 변경되었으며 규정에 정의된 방법으로 변형체 강성 값이 검증되어야 한다. 여러 번의 시뮬레이션을 통해 기준을 만족하는 균일한 밀도와 강성의 솔리드 형 장애물 모델과 균일하지 않은 셸 형 장애물 모델 등 2가지를 개발하였다. 본 연구에서 개발된 대형장애물을 사용하여 분산형 고속열차를 대상으로 규정의 대형장애물 충돌시뮬레이션을 수행하였고 그 결과를 평가하였다. 셸 형과 솔리드 형 장애물은 열차와 충돌 후 거동에 상당한 차이가 있었고, 셸 모델이 더 가혹한 결과를 나타내었다.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.72-77
• /
• 2014

In the ongoing debates over the need to identify new sources of energy and to reduce the emissions of greenhouse gases. Hydrogen has emerged as one of the most promising alternatives due to its emissions from the vehicle being virtually zero. The governments have identified the development of regulations and standards as one of the key requirements for commercialization of hydrogen-fueled vehicles. Regulations and standards will helpful in overcoming technological barriers to commercialization. Developments of a technique for safety assessment of Hydrogen Fuel Cell Vehicle(HFCV) includes four tasks, research for regulation system and policy, hydrogen safety, vehicle operation safety and protection against high-voltage. The objective is to establish a technique for safety assessment and amend safety standards for HFCV and consequently reflect research results to vehicle management policy. We devised safety standards and evaluation techniques with regard to high-pressure gas and high voltage of hydrogen fuel cell vehicle. Korean Motor Vehicle Safety Standards(KMVSS) for HFCV was amended to June 10, 2014. including the results of the safety assessment technology for high-voltage and hydrogen characteristics.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.49-56
• /
• 2015

The importance of safety culture improvement and transformation has highlighted since an organization's safety culture can be the causal factor of the accident. Every designated aviation training school have to manage their own SMS and will comply with the regulations specified in article 49, Korean Aviation law. In related regulations, it is specified the safety culture status and problems of an organizations must be accessed and improved. On this study, safety culture index of designated aviation training school has measured using abbreviated CASS developed by KTSA. Results from the statistical analysis, the overall safety culture average found as 3.711. Among the subindex, mean of 'Employee Empowerment' appeared the most high(3.980) and 'Reward System' appeared the most low(3.309). Service providers are able to apply the intervention strategy on the basis of the results of these measurements. The weak part of Safety Culture might be improved and this will lead the better organizational culture.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.60-65
• /
• 2013

Introducing the concept of construction safety in the design/engineering phase can improve the efficiency and effectiveness of safety management on construction sites. In this sense, further improvements for safety can be made in the design/engineering phase through the development of (1) an automated hazard identification process that is little dependent on user knowledge, (2) an automated construction schedule generation to accommodate varying hazard information over time, and (3) a visual representation of the results that is easy to understand. In this paper, we formulate an automated hazard identification framework for construction safety by extracting hazard information from related regulations to eliminate human interventions, and by utilizing a visualization technique in order to enhance users' understanding on hazard information. First, the hazard information is automatically extracted from textual safety and health regulations (i.e., Occupational Safety Health Administration (OSHA) Standards) by using natural language processing (NLP) techniques without users' interpretations. Next, scheduling and sequencing of the construction activities are automatically generated with regard to the 3D building model. Then, the extracted hazard information is integrated into the geometry data of construction elements in the industry foundation class (IFC) building model using a conformity-checking algorithm within the open source 3D computer graphics software. Preliminary results demonstrate that this approach is advantageous in that it can be used in the design/engineering phases of construction without the manual interpretation of safety experts, facilitating the designers' and engineers' proactive consideration for improving safety management.