• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.885-891
• /
• 2011

In this paper, we studied dc leakage current properties analysis of LED lamps of road and landscape lighting when leakage current appeared in dc power line. Generally, converter of LED lighting is divides to insulated type and non-insulated type according to components. When electric leakage happened in AC power line, earth leakage breaker(ELB) senses leakage current and interrupts electric circuit. In dc power source, We need experimental verification about dc electric leakage for electricity safety. In normal wiring conditions and in the water, in case of using insulated type of converter, dc leakage current did not occur. However, in case of using non-insulated type of converter, dc leakage current occurred and passed through into the ground. We found that there is a hazard of electric shock by dc leakage current. We expect that the results of these studies would be helpful for electrical safety of LED lamps for road and landscape lighting.

• Korean Journal of Organic Agriculture
• /
• v.25 no.3
• /
• pp.537-554
• /
• 2017

This study had purpose to examine the consumers preference and buying property of processed products by rice, barley, wheat, bean. For the study, the interview was conducted of 300 samples more than 19 years of age. We attempt to examine consumers' preference and individual properties when purchasing processed grain products. Questionnaire was filled for the 23 variable by referring to previous studies to investigate the properties to consider when consumer purchasing the products. To conceptualize, reduce the high correlation parameters by factor analysis. The results attribute to seven factors that safety, brand/image, taste/shelf life, convenience seeking, preferred high-quality, price, consumption patterns. These properties showed significant differences in demographics. First, there was statistically difference by age in safety, brand/image, high quality preference, taste/shelf life. Second, Safety and high-quality preference were the difference between jobs, and depending on household income were significant difference in consumption patterns. We analyzed the purchasing preference by purchase frequency. Ramen, bread, beer are higher purchase frequency than any processed grain products. On the other hand, frozen rice, soybean paste, red pepper paste that are used primarily domestic raw, were lower purchase frequency. But the difference of purchase property according to products was very similar that the highest factor is price, the following factor as taste. Based on these findings, the implications and the limitations of the study were presented.

• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2009

The safe and reliable performance of fusion and fission plants depends on the choice of suitable materials and an assessment of long-term materials degradation. These materials are degraded by their exposure to extreme conditions; it is necessary, therefore, to address the issue of long-term damage evolution of materials under service exposure in advanced plants. The empirical approach to the study of structural materials and fuels is reaching its limit when used to define and extrapolate new materials, new environments, or new operating conditions due to a lack of knowledge of the basic principles and mechanisms present. Materials designed for future Gen IV systems require significant innovation for the new environments that the materials will be exposed to. Thus, it is a challenge to understand the materials more precisely and to go far beyond the current empirical design methodology. Breakthrough technology is being achieved with the incorporation in design codes of a fundamental understanding of the properties of materials. This paper discusses the multi-scale, multi-code computations and multi-dimensional modelling undertaken to understand the mechanical properties of these materials. Such an approach is envisaged to probe beyond currently possible approaches to become a predictive tool in estimating the mechanical properties and lifetimes of materials.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.1-7
• /
• 2017

Forensic Engineering is the art and science of professionals qualified to serve as engineering experts in courts of law or in arbitration proceedings. Buses using compressed natural gas (CNG) trend to be extended in use internationally as optimal counterplan for reducing discharge gas of light oil due to high concern about environment. However, CNG buses is equipped with composite pressure vessels (CPVs); since the CPVs contain compressed natural gas, the risks in the case of accident is very high. In this study, the bursting test for the pressure vessel depending on the heat treatment conditions of the vessel in which the actual ruptured accident occurred, after the bursting test, the fracture pattern analysis had performed. The mechanical materials properties test using Instrumented Indentation Test had performed to confirm the mechanical properties for each heat treatment cases. Also, the fractography analysis and metallographic analysis had performed to find out the difference of each heat treatment case. By comparing normal vessel with abnormal vessel which have defect of heat treatment conditions in term of the bursting patterns and characteristics of containers using various forensic engineering methods, especially, it is possible to understand how important the heat treatment process is in the high pressure vessel unlike any product.

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.103-110
• /
• 2009

Since the mechanical properties of cement-based materials are time-dependent due to the prolonged cement hydration process, those of fiber reinforced concrete(FRC) may also be time-dependent. Toughness is one of important properties of FRC. Therefore, it should be investigated toughness development of FRCs with curing ages to fully understand the time-dependent characteristics of FRCs. To this end, the effect of curing ages on flexural toughness development of steel fiber reinforced concrete is studied. Three point bending test with notched beam specimen was adapted for this study. Hooked-end steel fiber(DRAMIX 40/30) was used as a fiber ingredient to investigate w/c ratio and fiber volume fraction effect on toughness development during curing. Three different water-cement ratios(0.44, 0.5 and 0.6) and fiber volume fractions(0%, 0.5% and 1%) were used as influence factors. Each mixture specimens were tested at five different ages, 0.5, 1, 3, 7 and 28 days. The study shows that flexure toughness development with age is quite different than other concrete material properties such as compressive strength. The study also shows that the toughness development trend correlates more closely to water/cement ratio than to fiber volume fraction.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.64-70
• /
• 2003

The thermal properties of chloroprene rubber (CR) with $^{60}Co\;{\gamma}$-ray irradiation has been investigated. The prepared CR was irradiated up to 1000kGy radiation dose by $^{60}Co\;{\gamma}$-ray and the radiation degradation of CR was investigated by thermogravimetric analysis and differential acanning calorimetry. Dynamic mechanical properties measurement and FT-IR observation are carried out as well. From these analyses results, the glass transition temperature($T_g$), decomposition onset temperature(DOT), oxidative induction time(OIT), the peak temperature of loss modulus and mechanical tan ${\delta}$ values were compared for the radiation degradation level of CR. The tendency between $T_g$ and peak temperature of loss modulus and mechanical tan ${\delta}$ agreed well with radiation doses. Decomposition temperature, OIT and DOT showed the same tendencies as increasing radiation doses. It was verified that these analyses are available to estimate the degradation level of CR.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.338-344
• /
• 2015

Background: The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Methods: Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. Results: The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. Conclusion: From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.69-77
• /
• 2009

Loss of human lives and properties including environmental damage due to large scale accidents requires change of our perception to marine safety. IMO is trying to re-establish overall marine safety system through long term plan such as GBS. Along this line, current regulation based safety evaluation is in process of changing into performance based methods, and for this transition, simulation based safety evaluation during design stage considering damage is highly necessary. In this paper, first, damage scenario is developed from IMO regulations and accident case studies. Then an integrated and simulation based safety evaluation prototype system considering both damage stability and structural safety is developed for the use during ship design process.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.291-301
• /
• 2018

To shorten the production cycle of Zaodan, this study first pickled Zaodan by a novel technology - vacuum decompression technology. Vacuum decompression technology could reduce the pickling time of Zaodan from 20 wk to about 9 wk. The protein content, moisture and pH of the Zaodan egg white gradually decreased with a concomitant increase in salt during the pickling process. The total sulfhydryl group (SH) group content of the egg white proteins was increased to $2.43{\times}10^{-3}mol/L$ after being pickled for 30 d, whereas the content of disulphide bonds (SS) was reduced to $23.35{\times}10^{-3}mol/L$. The surface hydrophobicity was lowest after pickling for 30 d. In addition, great changes occurred in the secondary structure of the egg white proteins after pickling for 20 d. The disappearance of ovomucin was noticeable based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.57-62
• /
• 1997

The combined structure of hybrid composite made through the bonding process of materials of different properties greatly defines its mechanical characteristics, as the results of the experiments on materials of different properties show much dissimilarity. When carbon/epoxy materials are applied to hybrid composite, the carbon materials helps to improve the mechanical properties of the hybrid composite, and the epoxy reduces its fracture strain and impact resistance. Carbon fiber which is now in general commercialization is classified as high modulus or high strength system, and its manufacturing methods are various. The study of the materials having combined structure is focused on the numerical analysis of the layers of bonding surface in materials with difference modulus. The hybrid composite made through the multilayered bonding of reinforced aluminium sheets with aramid fiber now faces the marketing phase, and especially its excellent fatigue resistance and mechanical properties promote active researches on the similar products of hybrid composite. This study aims to investigate the effects of CFRP volume ratio and fiber's orientation over the properties of mechanical strength and fatigue life of the hybrid composite, AI7075/CFRP. To carry out this study, static tensile and fatigue tests were given to some of the panels which, made through the co-cure processing in an autoclave, have different CFRP volume ratio and carbon fiber orientations.