• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.638-644
• /
• 2020

This study examines cracks that occur under the load of an aircraft. The life of aircraft vulnerability structures was analyzed and structural fitting improvements were made. Structural integrity and safety have been achieved through preemptive life expectancy and life management of aircraft structures. The crack size inspection capability of the aircraft under analysis is 0.03inch, compared with 0.032inch, which is the lowest of the three vulnerable parts. In addition, the fatigue life analysis results in approximately 1450 operating hours, the lowest of the three vulnerable parts relative to the aircraft's required life of more than 15000 operating hours, which increased the repeat count of the aircraft's initial and re-inspection times, and hence raised the resulting costs and manpower consumption. Finally, the features were improved through structural fitting of the identified three weak parts. The lowest critical crack size was secured at 0.13 through increased structural resistance to generated cracks and increased aircraft safety. The lowest structural fatigue life for cracks occurring during aircraft operation is 25000 operating hours, which are analyzed above the required structural life, resulting in more optimized improvements than the repair costs and excessive fitting range caused by cracks and fractures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.50-61
• /
• 2018

A precedent defense project study was carried out in the early stage of the project to support efficient determination of the acquisition method of the determined weapons system. A precedent study in the early stage of the project has been neglected, but lack of performance and increased costs are continuing problems. In a precedent study on a number of items within a limited time frame, expected risks during project implementation were not identified and reduced by failing to review the key review element in depth. Therefore, in this paper, we studied the application of the FTA/FMEA technique used in the system safety analysis process to identify key factors to be considered when carrying out the defense research project. The methodology for the development of the key review items was established through the improvement of the FTA/FMEA technique in order to meet specific conditions and given conditions. Based on the results of this study, we redefined core key factors in the precedent study stage, thereby eliminating unnecessary and anticipated risks that may arise in the future project management aspects of the defense project. It is anticipated that this will reduce costs and time in terms of the lifecycle of the weapon system and promote stable operation of the project through reduction of risk.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.435-448
• /
• 2013

The aim of this study is to investigate and develop the extended models for Economic Cash Amount(ECA), Cash Break Even-Point(BEP), and Cash Flow Statement(CFS) by referencing systematic literature review in the field. The study develops three extended models to determine the optimal cash amount: ECA model with interest opportunity cost, financing transaction cost and financing fail cost, ECA model with daily cash supply and interest opportunity cost, ECA model with financing fail cost and interest opportunity cost. Earnings Before Interests, Tax, Depreciation and Amortization(EBITDA) is obtained by subtracting noncash depreciation costs from Earning Before Interest and Tax(EBIT), which is efficient metric to evaluate operating cash flow. The research also develops two extended Cash BEP models, considered as interest and corporate tax, in order to indentify the break-even point as EBITDA equals zero. Furthermore, this paper proposes the modified version of CFS by introducing the reclassification of operating and financing accounts in the statement of financial position. In addition, the study also present the reclassification of five types of profit, such as gross profit, EBIT, ordinary profit, special profit, and net profit within the statement of comprehensive income. In order to provide a better understanding of the proposed cash flow models, numerical examples, such as two-sample t test and Analysis of Variance(ANOVA), are presented to demonstrate the statistical significance according to the industrial types for net working capital(i.e cash-to-cash), net profit, operating cash flow and free cash flow.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.151-164
• /
• 2006

Numerous efforts are currently underway to automate pavementcrack and joint sealing activities. Productivity improvements, improved safety and quality, and reduced road user costs motivate these developments. Recently, an automated pavement crack sealing machine has been developed to automate the process of sealing pavement cracks and joints in Korea. This paper mainly describes the results of the economic feasibility analysis revealed through its overall performance evaluation and field tests. Finally, it is concluded that the automated machine exceeds the performance in terms of productivity, safety, and quality required in conventional method, thus making the machine economically feasible.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.89-98
• /
• 2011

The traffic accidents at a construction site, which happen due to construction vehicles' frequent access to a construction site, its subsequent conflicts with ordinary vehicles and pedestrians, and inappropriate installation & management of traffic security facilities, have not many proportions in all traffic accidents, but obviously, the accident damage is quite serious when comparing the level of the fatal per one accident. This research conducted an analysis of traffic accident injury severity using Ordered Probit Model in relation to 241 traffic accident cases that occurred caused by construction sites among the traffic accidents that took place in Seoul and Gyeoggi-do region for two years from 2006 until 2007. As a result, the significant variables enough to explain traffic accident injury severity were analyzed to be the state of road surface, linear shape of an accident spot & whether the damaging car belongs to the vehicle for construction, and whether vehicles have access to a construction site at the time of an accident. Through this, this research found out some fact as follows: first, there need to be more aggressive management of the vehicles for construction and a year-round placement of the manpower who can control vehicular access to a construction site. Second, it is necessary to get drivers to recognize the fact that there exists a construction site on the construction section which is on the border of curved roads in advance to prevent a traffic accident, helping to reduce socioeconomic loss & costs incurred by a traffic accident.

• Health Policy and Management
• /
• v.25 no.2
• /
• pp.67-70
• /
• 2015

To establish an appropriate policy for robotic surgery in Korea, the National Evidence-based Collaborating Agency (NECA) and the Korean Society of Health Policy and Administration held a round-table conference (RTC) to gather opinions through a comprehensive discussion of scientific information in gastric cancer. The NECA RTC is a public discussion forum wherein experts from diverse fields and members of the lay public conduct in-depth discussions on a selected social issue in the health and medical field. For this study, representatives from the medical field, patient groups, industry, the press, and policy makers participated in a discussion focused on the medical and scientific evidence for the use of robotic surgery in gastric cancer. According to the RTC results, robotic surgery showed more favorable results in safety and efficacy than open surgery and it is similar to laparoscopy. When the cost-effectiveness of robotic surgery and laparoscopy is compared, robotic surgery costs are higher but there was no difference between the two of them in terms of effectiveness (pain, quality of life, complications, etc.). In order to resolve the high cost issue of the robotic surgery, a proper policy should be implemented to facilitate the development of a cost-effective model of the robotic surgery equipment. The higher cost of robotic surgery require more evidence of its safety and efficacy as well as the cost-effectiveness issues of this method. Discussions on the national insurance coverage of robotic surgery seems to be necessary in the near future.

• Journal of radiological science and technology
• /
• v.43 no.6
• /
• pp.481-487
• /
• 2020

Radiation measurement technology has steadily improved and its usage is expanding in various industries such as nuclear medicine, security search, satellite, nondestructive testing, environmental industries and the domain of nuclear power plants (NPPs). Especially, the simultaneous measurements of gamma rays and neutrons can be even more critical for nuclear safety management of spent nuclear fuel and monitoring of the nuclear material. A semiconductor detector comprising cadmium, zinc, and tellurium (CZT) enables to detect gamma-rays due to the significant atomic weight of the elements via immediate neutron and gamma-ray detection. Semiconductor sensors might be used for nuclear safety management by monitoring nuclear materials and spent nuclear fuel with high spatial resolution as well as providing real-time measurements. We aim to introduce a portable nuclide-analysis device that enables the simultaneous measurements of neutrons and gamma rays using a CZT sensor. The detector has a high density and wide energy band gap, and thus exhibits highly sensitive physical characteristics and characteristics are required for performing neutron and gamma-ray detection. Portable nuclide-analysis device is used on NPP-decommissioning sites or the purpose of nuclear nonproliferation, it will rapidly detect the nuclear material and provide radioactive-material information. Eventually, portable nuclide-analysis device can reduce measurement time and economic costs by providing a basis for rational decision making.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1293-1293
• /
• 2024

Virtual reality (VR) is increasingly utilized in the construction industry for diverse applications. Immersive virtual reality (IVR) offers practical experiences and educational opportunities for workers, enhancing productivity and safety. Efforts to optimize IVR involve analyzing biometric responses to monitor concentration, assess learning efficiency, and deliver personalized content. However, IVR faces challenges such as high production costs and prolonged production periods. Additionally, integrating biometric response recording into IVR experiences requires separate modules, further extending production timelines. To address these challenges, an integrated platform is necessary to streamline IVR production, user experience, and biometric response setup and recording. This study introduces such a platform designed to enhance the efficacy of IVR experiences through real-time biometric response analysis. The proposed platform comprises three main processes: (i) IVR content production using Unity; (ii) biometric response definition; and (iii) IVR content experience accompanied by generated logs for biometric responses. Firstly, IVR content production using Unity involves the development of IVR environments and scenarios. The platform incorporates diverse 3D models, including urban landscapes, building elements, and furniture, as the basis for IVR environments. Scenarios are constructed by integrating events into these environments, triggered by conditions such as reaching specific locations, the passage of time, or user interactions. Upon event activation, participants are presented with description UIs, quiz UIs, or route guidance, facilitating engagement and progression through interaction. Secondly, biometric responses encompass eye tracking and EEG. Eye tracking captures pupil diameter and fixation status on Areas of Interest (AOI), defined during IVR content production. EEG recording options include signals from each channel by default, as well as frequency-specific signals and EEG metrics such as attention, stress, fatigue, valence, and arousal. The platform supports the addition of new EEG metrics, enhancing customization and recording capabilities. Lastly, IVR content can be experienced alongside generated logs for biometric responses. The dataset enables monitoring and evaluation of participants' learning performance during IVR experiences, with the potential to enhance worker safety and productivity through immersive practical training and education.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.120-131
• /
• 2009

Most world-leading companies are aware that Environment and Health and Safety Issues are critical to the product quality and sustainable growth of their company. Environment-friendly efforts are seen in almost all aspects of business operations in an advanced nation. The Extended Producer Responsibility(EPR) and EU Directive on Waste Electric and Electronic Equipment(WEEE) attempt to tackle the growing quantity of WEEE by making producers responsible for the costs of the collection and recycling of their products at the End-of-Life(EOL). To implement the RFID-based integration system for EOL household electric appliances, such as washing machines and refrigerators, we analyzed the process of collecting, recovering, and recycling the EOL products returned from the distribution points. Furthermore, we proposed a soon-to-be process using the RFID-based integration system in the metropolitan recycling center(MRC). This soon-to-be process model is composed of RFID tags, readers, ALEs, applications and several devices. Through the introduction of the RFID-based integration system, we are expecting to see increasing traceability and real-time management for EOL products from customers, and also improvements in valuable reusable materials(VRM) produced from recycling processes.

• Korean Institute of Interior Design Journal
• /
• v.25 no.3
• /
• pp.90-101
• /
• 2016

The Homeshare program, which was introduced in 2012, has been implemented with the purpose of reduction of housing costs for young students and economic support for the senior to prevent isolation and help themselves. Nonetheless, the program has not being activated and the research about it has not progressed well. Therefore, this study as a basic research of the program aims to analyze and evaluate the program in progress in district offices to push it forward. This study was undertaken on documentary research and interviews, which analyzed advanced researches and open materials from the websites of district offices. The interviews were conducted in 4 gu-district offices (Nowon-gu, Gwangjin-gu, Seodaemun-gu, and Seongdong-gu) and did interviews with officials in charge on July in 2015. The result of this study is as follows. First, the Homeshare is being activated around the university town, which has advantage of housing welfare aspects for young students and social welfare aspects for the senior. Second, the support structures of the Homeshare can be categorized as the gu-districts offices, local resources and different structures funded by the Seoul City. Third, the process of the Homeshare takes 5 steps consisted of advertisement, reception/counseling, matching, contract, follow-up management. Fourth, the matching makes it a rule to match the same gender considering safety. In the case of the participation of the official in charge, it has a advantage of solving problems that can occur when the matching, which can lead to smooth progress. Fifth, joint consultation is divided into the contract among participants and the contract between participants and the gu-district office. Sixth, the follow-up management takes rather passive approaches such as calls once or twice a month and visits when necessary. For the activation of the Homeshare, it is required to improve it through the various methods such as regular visits, satisfaction researches and so on. This study resulted from investigating and analyzing the Homeshare operation system between generations will be considered to be a reference to the underlying management.