• 제목/요약/키워드: safety limits

검색결과 892건 처리시간 0.031초

증발을 이용한 방사성 액체폐기물의 처리와 피폭선량평가 (Treatment of Radioactive Liquid Waste Using Natural Evaporator and Resulted Exposure Dose Assessment)

  • 정경환;박승국;김은한;정기정;박현수
    • Journal of Radiation Protection and Research
    • /
    • 제24권2호
    • /
    • pp.101-108
    • /
    • 1999
  • 극저준위 방사성액체폐기물 처리를 위하여 공기의 온도와 습도 및 유입 공기의 속도에 따른 증발량의 관계를 천을 이용한 강제증발실험 장치로 실험하였다. 그 결과 각각의 변수와 증발량의 상관관계를 실험식으로 도출하였다. 또한 Cs-137 을 함유한 모의폐액을 사용하여 본 장치에 대한 제염 계수를 얻은 결과 $DF=10^4$으로 나타났다. TRlGA Mark II & III 연구용 원자로 폐로시 발생되는 극저준위 방사성액체폐기물을 증발장치로 처리할 때 주변의 일반개인에 대한 연간 피폭선량을 보수적으로 평가한 결과, 유효선량 (effective dose)은 $1.01{\times}10^{-3}mSv$이고, 환경으로 배출되는 공기의 방사능 농도(Cs-137)는 $4.637{\times}10^{-14}\;{\mu}Ci/cc$ air 이다. 따라서 극저준위 방사성액체폐기물의 처리를 위하여 강제증발장치를 사용하는 것은 주민에 아무런 영향이 없음을 알 수 있었다.

  • PDF

Seven-Day Bismuth-based Quadruple Therapy as an Initial Treatment for Helicobacter pylori Infection in a High Metronidazole Resistant Area

  • Vilaichone, Ratha-korn;Prapitpaiboon, Hatainuch;Gamnarai, Pornpen;Namtanee, Juraiwan;Wongcha-um, Arti;Chaithongrat, Supakarn;Mahachai, Varocha
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권14호
    • /
    • pp.6089-6092
    • /
    • 2015
  • Background: The prevalence of metronidazole-resistant H. pylori is almost 50% in Thailand which severely limits the use of this drug for eradication therapy. The aims of this study were to evaluate the efficacy and safety profiles of 7-day bismuth-based quadruple therapy including metronidazole as an initial treatment for H. pylori infection in a high metronidazole resistance area. Materials and Methods: This study was performed at Thammasat University Hospital and King Chulalongkorn Memorial Hospital during January 2009 to October 2010. Patients with non-ulcer dyspepsia (NUD) with active H. pylori infection were assigned to receive seven days of quadruple therapy (pantoprazole 40 mg bid, bismuth subsalicylate 1,048 mg bid, amoxicillin 1 gm bid and metronidazole 400 mg tid). H. pylori infection was defined as positive H. pylori culture or two positive tests (rapid urease test and histology). Antibiotic susceptibility test for metronidazole by Epsilometer test (E-test) was performed in all positive cultures. At least four weeks after treatment, $^{13}C$ urea breath test ($^{13}C-UBT$) was performed to confirm H. pylori eradication. Results: A total of 114 patients were enrolled in this study, 50 males and 64 females with a mean age of 49.8 years. All 114 patients had a diagnosis of NUD. Overall eradication as confirmed by negative $^{13}C-UBT$ was achieved in 94 out of 114 patients (82.5%). 44 patients had positive cultures and success for E-test. In vitro metronidazole resistance was observed in 22/44 (50%) patients. Eradication rate in patients with metronidazole resistant strains was 16/22 (72.7%) and 20/22 (90.1%) with metronidazole sensitive strains (72.7% vs 90.1%, p-value=0.12; OR=3.75 [95%CI=0.6-31.5]). Minor adverse reactions included nausea, bitter taste, diarrhea and black stools but none of the patients dropped out from the study. Conclusions: Initial treatment with 7-day bismuth-based quadruple therapy including metronidazole, amoxycillin and pantoprazole is highly effective and well tolerated for metronidazole-sensitive H. pylori infections. However, the efficacy markedly decline with metronidazole resistance. Longer duration of this regimen might be required to improve the eradication rate and larger multi-center studies are needed to confirm this hypothesis.

MR Technology to 4T

  • Vaughan, Thomas
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
    • /
    • pp.103-105
    • /
    • 2003
  • After fifteen years of development, Magnetic Resonance (MR) technology for human imaging and spectroscopy is reaching a refined state with FDA approved 3T clinical products from Siemens, GE, and Philips. Broker has cleared CE approval with a 4T system. Varian supports a 4T system platform as well. Shielded magnets are standard at 3T from GE, Oxford, Magnex, and IGC. A shielded 4T whole body magnet is available from Oxford. Stronger switched gradients and dynamic shim coils, desired at any field, areespecially useful at higher static magnetic fields B0. In addition to the higher currents required for higher resolution slice or volume selection afforded by higher SNR, whole body gradient coils will be driven at increasing slew rates to meet the needs of new cardiac applications and other requirements. For example 3T and 4T systems are now being equipped with 2kV, 500A gradient coils and amplifiers capable of generating 4G/cm in 200msec, over a 67+/-cm bore diameter. High field EPI applications require oscillation rates at 1 kHz and higher. To achieve a benchmark 0.2 ppm shim over a 30cm sphere in a high field magnet, at least four stages of shimming need to be considered. 1) A good high field magnet will be built to a homogeneity spec. falling in the range of 100 to 150 ppm over this 30cm spherical "sweet spot" 2) Most modern high field magnets will also have superconducting shim coils capable of finding 1.5 ppm by their adjustment during system installation. 3) Passive ferro-magnetic shimming combined with 4) active, high order room temperature shim coils (as many as five orders are now being recommended) will accomplish 0.2 ppm over the 30cm sphere, and 0.1 ppm over a human brain in even the highest field magnets for human studies. Safety concerns for strong, fast gradients at any B0 field include acoustic noise and peripheral nerve stimulation. One or more of the mechanical decoupling methods may lead to quieter gradients. Patient positioning relative to asymmetric or short gradient coils may limit peripheral nerve stimulation at higher slew rates. Gradient designs combining a short coil for local speed and strength with a longer coil for coverage are being developed for 3T systems. Local gradients give another approach to maximizing performance over a limited region while keeping within the physiologically imposed dB0/dt performance limits.

  • PDF

국내유통농산물 중 잔류농약 모니터링 및 안전성 평가 (Monitoring of Pesticide Residues and Risk Assessment of Agricultural Products Consumed in South Korea)

  • 김성훈;최원조;백용규;김우성
    • 한국식품영양과학회지
    • /
    • 제37권11호
    • /
    • pp.1515-1522
    • /
    • 2008
  • 본 연구는 물리.화학적인 특성이 서로 다른 37종의 농약 성분을 GC/MS/MS로 농약 성분별 MRM에 대한 동시다성분 분석법을 개발하였으며, 이 분석법에서 제시한 MRM을 이용하여 농산물 중 잔류하고 있는 농약성분의 정성 및 정량이 동시에 가능하게 하였고, 이 분석법은 기존의 장비(GC, HPLC, GC/MS 등)를 이용한 검사법에 비해 1건 처리 시 소요되는 분석시간이 짧으며(1건 분석 시 소요시간 30분 이내) 검사결과의 정확성에서 우수하였다. 잔류농약분석에 일반적으로 사용되는 GC-ECD 및 GC-NPD를 사용하지 않고 정성 및 정량이 동시에 가능한 GC-MS/MS를 사용하여 MRM mode를 이용한 농약성분의 동시 분석 및 분석법에 따른 validation을 실시하였다. 그 결과 real sample인 콩과 레몬의 경우 모든 농약에서 70% 이상의 회수율을 보였으며, correlation coefficient($r^2$)도 대부분의 농약에서 0.99 이상의 좋은 직선성을 나타내었다. 또한 분석법을 근거로 국내유통 중인 농산물의 잔류실태를 파악하기 위해 모니터링을 실시하였으며 검출된 농약성분에 한해서는 섭취하는 농약에 대한 위해도를 평가하였다. 국내의 대형시장에 유통되는 농산물 약 1,000여건을 수거하여 확립된 분석법으로 잔류농약 모니터링을 실시하였다. 그 결과 23개의 농산물에서 잔류농약이 검출되었는데 주로 엽채류에서 잔류농약이 검출되었고 금귤류에서 주로 검출된 과실류는 2.2%의 검출율을 보였다. 이 중 MRL을 초과하는 수준의 농약이 검출된 것은 엽채류 중 하나인 무 잎에서 검출되어 0.1%의 부적합율을 나타냈다. 검출된 농약과 그 검출량을 토대로 농약의 1일 섭취허용량(acceptable daily intake, ADI)을 바탕으로 음식을 통해 매일 섭취하는 농약이 사람에게 미치는 위해도를 평가한 결과 ADI 대비 $0.0000{\sim}0.3462%$의 현저히 낮은 수준으로 나타났다.

경기도내 유통 수입과실류의 잔류농약 실태조사 (A survey on pesticide residues of imported fruits circulated in Gyeonggido)

  • 조윤식;강정복;김양희;정진아;허정원;이소현;임영식;배호정;강흥규;이정희;정은숙;이병훈;박용복;이정복
    • 농약과학회지
    • /
    • 제16권3호
    • /
    • pp.195-201
    • /
    • 2012
  • 본 연구는 경기도에서 유통 중인 수입과실류에 대한 잔류농약 분석을 수행하였다. 총 22품목 124건의 시료를 구입하여 GC/NPD-ECD, TOF/MS, UPLC/PDA 및 HPLC/FLD, LC/MS/MS를 이용하여 218종 잔류농약을 동시 다성분 분석법으로 분석한 결과 18건의 과실에서 잔류농약이 0.003~0.3 mg/kg 범위로 검출되었으나 기준초과 시료는 없었다. 과실의 부위별 특성에 따른 잔류농약정도를 알아보기 위해 농약이 검출된 과실류 중 14건에 대하여 분리 실험을 실시하였으며, 그 결과 과피 14건에서 0.03~1.5 mg/kg, 과육의 경우 2건에서 검출한계 미만으로 나타났다. 실험결과 모두 잔류농약허용기준 이내에서 검출되어 정상적인 방법으로 섭취할 경우 위해도는 매우 낮은 수준이었다. 그러나 미량이라도 장기간 섭취시 인체에 유해할 수 있으며, 검출빈도가 높은 성분들이 검출되므로 수입과실에 대한 지속적이고 체계적인 모니터링이 필요하겠다.

제조업체에서 발생하는 호흡성분진중 XRD와 FTIR를 이용한 결정형유리규산 농도의 분석 제2부 : 요업, 석재, 콘크리트, 유리, 연탄 및 기타사업장 (Analysis of Quartz Contents by XRD and FTIR in Respirable Dust from Various Manufacturing Industries Part 2 - Ceramics, Stone, Concrete, Glass and Briquets, etc.)

  • 김현욱;피영규;노영만;원정일
    • 한국산업보건학회지
    • /
    • 제9권1호
    • /
    • pp.99-111
    • /
    • 1999
  • The purpose of this study was to evaluate crystalline silica contents in airborne respirable dusts from various manufacturing industries and to compare analytical ability of two different methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy(FTIR). Various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: ceramics, brick, concrete, and abrasive material etc. The personal respirable dust samples were collected using l0mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size. polyvinylchloride (PVC) filters as collection media. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 7500, and 7602 for dust collection and quartz analysis. A total of 48 samples were collected from these industries. Initial analyses of these samples showed log-normal distributions for dust and quartz concentrations. Some results from ceramics and stone exceeded current Korean Occupational Exposure Limits. The average concentrations of personal respirable dust by cyclone were 0.43, 0.24, 0.26, 0.42, 0.53 and $0.29mg/m^3$ in ceramics, stone, concrete, glass, briquets, and others, respectively. A comparison of performance of two analytical methods for quantifying crystalline silica was performed using data from ceramics. The results showed that no significant difference was found between two methods for ceramics. The mean crystalline silica contents determined by XRD were 3.41 % of samples from briquets and 7.18 % from ceramics and were 2.58 % from concrete and 10.33 % from ceramics by FTIR. For crystalline silica analysis, two analytical techniques were highly correlated with $r^2=0.81$ from ceramics. Both cristobalite and tridymite were not detected by XRD and FTIR.

  • PDF

"해양경비법" 검토와 발전방안 (The Examination and Development Plan of Maritime Policing Act)

  • 노호래
    • 시큐리티연구
    • /
    • 제32호
    • /
    • pp.95-122
    • /
    • 2012
  • 2012년 8월 23일에 시행예정인 "해양경비법"은 해상에서의 경찰권 발동의 근거법을 제정했다는 점에서 그 의의가 있으나 다음과 같은 한계가 있다. 첫째로, 해양경찰의 조직법적 근거가 미약하다. 이는 행정조직 설치의 근거를 법률이 아니라 하부령인 대통령령과 국토해양부령에 위임하는 형태로 엄격한 의미에서 행정조직법정주의에 어긋나는 측면이 있다. 둘째로, "해양경비법" 제14조의 항해보호조치 규정은 이미 발생한 해상집단행동에 대한 조치 중심으로 기술되어 있으므로 사전예방적인 측면을 더 강화하여 "해상집회시위의 사전신고제", "해상집회시위의 금지구역설정" 등의 규정의 신설이 필요하다고 생각된다. 셋째로, "해양경비법" 제22조 과태료는 과중한 측면이 있다. 해양경찰의 해상검문검색에 대한 불응에 대하여 200만원을 부과하는 것은 과중한 편이다. 해상의 특수성을 인정하더라도 과중한 측면이 있으므로 100만원 정도를 부과하는 것이 합당할 것으로 생각된다. 넷째로, 해양경찰내에 자원관리부서를 신설하여 해양조사 및 자원관리 역량을 강화하고, 다른 기관의 해양조사선박을 지원하고, 해양경찰이 직접 조사할 필요성이 있으며, 주변국과 해양자원 관련사항을 발생한 경우 효율적 대응이 필요하다.

  • PDF

교통류특성을 고려한 군화물차량군 경로선정 (Shortest Path Problems of Military Vehicles Considering Traffic Flow Characteristics)

  • 방현석;김건영;강경우
    • 대한교통학회지
    • /
    • 제21권2호
    • /
    • pp.71-82
    • /
    • 2003
  • 최단경로문제(Shortest Path Problems)는 군사적 측면에서 매우 중요한 이슈이며. 가상전쟁에서도 매우 중요한 시뮬레이션 대상이다. 그러나. 기존의 군수송계획모델에는 링크(link)의 비용만을 고려한 하나의 해와경로만을 찾으므로 그 현실성이 떨어졌다. 본 연구는 Shier 알고리듬을 이용하여 차량군의 특성을 갖는 이동부대가 군사적 개념의 링크 용량과 시간개념의 비용을 갖는 네트웍에서 목적지로 가는 다수의 최단 경로를 찾는 것이다. 이 알고리듬의 수송계획 모델에의 사용가능성 여부를 검증하기 위하여 다양한 크기와 형태의 네트웍을 대상으로 기존의 Dijkstra 알고리듬과 비교 실험을 하였으며, 실제 군 병참 네트웍과 우발상황 네트웍을 대상으로 실증분석을 하였다. 본 연구를 통하여 첫째, 군수송계획 모델에의 적용가능성이 큰 것으로 나타났으며, 군 병참 네트웍을 대상으로 분석한 결과 링크의 비용에 대한 개념전환이 필요한 것으로 나타났다. 둘째, 다양한 제대를 대상으로 분석한 결과 각 대안별로 용량의 제약을 받는 구간이 발생하였으며, 이를 극복하기 위한 취약구간에 대한 대책, 이동수단의 성능향상, 분리행군에 대한 교범상의 반영 등이 필요함이 발견되었다. 연구의 한계점으로는 첫째, 다수 최단경로문제를 군사적 분야에 적용한 기존의 연구들이 대부분 임의의 네트웍을 대상으로 분석했기 때문에, 본 연구에서 군사적 네트웍에 적용한 결과치와의 차이점을 파악하기가 곤란하였다. 둘째, 본 연구는 링크의 용량만을 제약사항으로 두었는데, 교량이나 터널 등의 제약사항을 고려한 분석이 이루어지면, 전차나 공병장비 같은 중차량의 이동계획 수립시에도 보다 현실적으로 적용할 수 있을 것으로 판단된다.

국내 건축자재에 함유된 석면의 함량에 대한 X-선회절분석 연구 (Asbestos Determination of Some Domestic Building-Materials Using X-ray diffraction)

  • 황진연;이효민;오지호;박기남
    • 한국광물학회지
    • /
    • 제24권2호
    • /
    • pp.119-131
    • /
    • 2011
  • 대표적인 일부 건축자재의 석면 함량을 일본공업표준법 (JIS)에 따른 X-선회절분석으로 측정하였고, 분석과정에서의 광물학적 성분변화와 문제점을 검토하였다. 국내의 슬레이트, 벽재, 천장재의 대표적인 건축자재에 대해 석면 함량을 정량한 결과, 슬레이트 시료가 6.87~6.93%의 온석면을 함유하여 가장 많은 석면을 함유하고 있는 것으로 분석되었다. 분석된 다른 건축자재들에서도 1.35~3.98%의 범위로 다양한 양의 온석면이 포함되어 있는 것으로 분석되었다. 이번 연구에서 국내에서 처음으로 일부 건축자재의 석면 함량에 대한 X-선회절방법에 의한 분석결과를 제시하였으며, 이런 방법을 통하여 국내에서 최근에 개정된 규정(노동부 산업안전보건법 제2007-26호)에서 규정한 석면의 허용기준량 0.1% 함량을 평가하는데 효과적인 것으로 나타났다. 일부 시료에서 온석면과 함께 투각섬석이 소량 수반되고 있음이 나타났으나, 이들의 결정형태와 그 함량과 지질학적 산출상태 등으로 보아, 석면 활용의 목적으로 첨가한 것이 아니고 온석면에 본래 수반되었던 볼순광물로 나타난 것으로 생각된다. X-선회절분석으로 석면상과 비석면상의 구분이 어렵기 때문에 형태를 관찰할 수 있는 광학현미경과 전자현미경의 보조적인 관찰도 필요한 것으로 나타났다. 이번에 사용한 X-선회절분석 방법에서는 가열처리와 산처리에 의한 소실율이 많아 석면의 농집도가 높은 건축자재 시료에 가장 효과적인 것으로 나타났다.

국내산 인삼 가공과정 중 difenoconazole의 가공 및 감소계수 연구 (Processing and Reducing Factors of Difenoconazole during Ginseng Processing)

  • 김종걸;박홍열;양규완;김성수;권찬혁;정연호;허장현
    • 한국식품과학회지
    • /
    • 제43권3호
    • /
    • pp.263-270
    • /
    • 2011
  • 본 연구는 인삼 및 인삼 가공품에 대한 합리적인 농약잔류허용기준 설정과 인삼 및 가공품 중 농약의 잔류성을 규명하고 이를 토대로 인삼 가공단계별 농약의 감소계수와 가공계수를 산출하고자 수행되었다. 시험농약은 difenoconazole로 6년근 인삼포 2곳(강원도 원주, 경기도 이천)에 농약사용기준에 따라 살포한 후 수삼을 수확하여 건삼, 홍삼, 인삼 농축액 및 홍삼 농축액 시료로 가공하였다. 시험결과 difenoconazole의 잔류량은 원주, 이천수삼에서 모두 LOQ(0.02 mg/kg) 미만, 건삼은 각각 0.04 mg/kg, 0.10 mg/kg, 홍삼은 각각 LOQ(0.04 mg/kg) 미만, 0.08 mg/kg, 인삼 알코올 농축액은 각각 0.07, 0.36 mg/kg, 인삼 물 농축액은 모두 LOQ(0.04 mg/kg) 미만, 홍삼 알코올 농축액은 각각 0.08 mg/kg, 0.18 mg/kg, 홍삼 물 농축액은 모두 LOQ(0.04 mg/kg) 미만으로 모두 농약잔류허용기준(MRL) 이하였다. Difenoconazole의 가공계수는 건삼 3.55, 홍삼 3.17, 인삼 알코올 농축액 10.78, 인삼 물 농축액 2.00, 홍삼 알코올 농축액 6.45, 홍삼 물 농축액 2.00으로 산출되었으며, 감소계수는 건삼 1.09, 홍삼 1.02, 인삼 알코올 농축액 3.74, 인삼 물 농축액 0.73, 홍삼 알코올 농축액 2.42, 홍삼 물 농축액 0.74였다.