• The Korean Journal of Pesticide Science
• /
• v.13 no.1
• /
• pp.13-20
• /
• 2009

Two insecticides, commonly used for Chinese cabbage, etofenprox and methoxyfenozide, were subjected to a field residue trial to evaluate safeties of the residues at harvest. The pesticides were sprayed onto the crop at recommended and double doses 10 days before the prearranged harvest and then sampling was done at 0, 1, 2, 3, 5, 7, 10, and 12 days after spraying. The amounts of pesticides residues in the crop were analyzed by chromatographic methods. Limits of detection (LODs) of both etofenprox and methoxyfenozide were $0.01mg\;kg^{-1}$ and mean recoveries were $96.76{\pm}2.67$ (CV=2.76%) and $95.84{\pm}2.57%$(CV=2.69%) in case of etofenprox and $103.26{\pm}3.21$ (CV=3.11%) and $94.50{\pm}1.35%$(CV=1.43%) in case of methoxyfenozide, respectively. Biological half-lives of etofenprox and methoxyfenozide were 3.2 and 3.5 days at the recommended dose and 2.7 and 3.5 days at the double dose, respectively. Initial residue levels of the pesticides at the recommended and double doses exceeded their MRLs, but final residue levels of the pesticides in the crop samples at harvest were less than their MRLs. The ratios of the EDI to ADI by intake the crop harvested 10 days after spraying were less than 4% of their ADIs, representing that residue levels of two pesticides at harvest were evaluated as safe.

• The Korean Journal of Pesticide Science
• /
• v.13 no.1
• /
• pp.28-38
• /
• 2009

An extrapolation of residue data of seven commonly used pesticides namely bifenthrin, chlorothalonil, cypermethrin, diazinon, fenvalerate, phenthoate and procymidone on a total of 22 minor crops has been carried out in an experimental field trial. The pesticides were applied to 11 leafy-, 5 root- and 6 stem-crops grown in the experimental green-house and the crops and plants were randomly collected at 1, 3, 5, 7 days after application. The average recoveries of applied pesticides were ranged from 72.0 to 117.0% in leafy crops, from 81.3 to 105.0% in stem crops and from 70.1 to 108.1% in the root-crops. Limits of detection (LODs) were 0.005-0.1 mg/kg in the leafy crops and 0.001-0.005 mg/kg in both the stem & root crops. Based on the results of residual dissipation pattern and their morphology, all crops were classified into high and low residual groups. The results showed that it might be possible to extrapolate residual data of stem-crops to root-crops within the same group. Crops that have currently no registered pesticide for use, would be possible to use the pesticides which are already been registered for the similar crops.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.247-263
• /
• 2016

Safe animal feed is important for the health of animals, the environment and for the safety of foods of animal origin. Therefore, the aims of this study were: 1) to validate simultaneous analytical method and 2) to investigate the amount of pesticide residues in animal feed from Republic of Korea as a part of official control. A total of 126 samples were collected in 2015 and analyzed for 105 pesticides. According to pesticides monitoring result, no residue was found in 84.1% of the samples, whereas 15.9% of samples contained pesticide residues below the maximum residue limits (MRLs). Pirimiphos-methyl and cyproconazole were the two most frequently found pesticides. The results show that all commercial feed monitored in 2015 were safe under the Korean MRL and occurrence of pesticide residues in animal feed could not be considered serious threats to human and animal health. However, continuous monitoring with tighter regulation for pesticide residues in animal feed is recommended.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.198-203
• /
• 2009

We examined the effects of electron-beam irradiation(0.5, 1, 2, or 5 kGy) on microbiological, physicochemical, and sensory quality characteristics of Myungran Jeotgal, Korean fermented seafood, during subsequent storage at $4^{\circ}C$ for 2 weeks. Viable counts of total aerobic bacteria, yeasts and molds, and total coliforms fell, after irradiation, to below detection limits($10^1CFU/g$). The pH of irradiated Myungran Jeotgal was maintained during storage but that of the non-irradiated control decreased. Sensory quality was not affected by electron-beam irradiation, except that color scores in samples irradiated with 2 and 5 kGy were lower than that of the control. Lipid oxidation tended to rise with increased irradiation dose and longer storage periods. The results suggest that electron-beam irradiation can be used to extend the shelf-life of Myungran Jeotgal without apparent quality attribute deterioration. However, means of preventing lipid oxidation resulting from electron-beam irradiation need consideration if irradiation is to find further applications in the food industry.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.505-516
• /
• 2016

With the development of nanotechnology, nanomaterials are used in various fields. Therefore, the interest regarding the safety of nanomaterial use is increasing and much effort is diverted toward establishment of exposure assessment and management methods. Occupational exposure limits (OELs) are effectively used to protect the health of workers in various industrial workplaces. This study aimed to propose an OEL for domestic multi-walled carbon nanotubes (MWCNTs) based on animal inhalation toxicity test. Basic procedure for development of OELs was examined. For OEL estimation, epidemiological study and quantitative risk assessment are generally performed based on toxicity data. In addition, inhalation toxicity data-based no observed adverse effect level (NOAEL) and benchmark dose (BMD) are estimated to obtain the OEL. Three different estimation processes (NEDO in Japan, NIOSH in USA, and Baytubes in Germany) of OELs for carbon nanotubes (CNTs) were intensively reviewed. From the rat inhalation toxicity test for MWCNTs manufactured in Korea, a NOAEL of $0.98mg/m^3$ was derived. Using the simple equation for estimation of OEL suggested by NEDO, the OEL of $142{\mu}g/m^3$ was estimated for the MWCNT manufacturing workplace. Here, we used test rat and Korean human data and adopted 36 as an uncertainty factor. The OEL for MWCNT estimated in this work is higher than those ($2-80{\mu}g/m^3$) suggested by previous investigators. It may be greatly caused by different physicochemical properties of MWCNT and their dispersion method and test rat data. For setting of regulatory OELs in CNT workplaces, further epidemiological studies in addition to animal studies are needed. More advanced technical methods such as CNT dispersion in air and liquid should be also developed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2015

The purpose of this study was to establish the critical limit of CCP (Critical Control Point) of a HACCP (Hazard Analysis Critical Control Point) system used in the production of seasoned laver products. The hazard analysis examined microbial evaluations and developed a HACCP management plan for the heating process. The results were determined to be capable of reducing the biological element of CCP via the secondary roasting process. This study examined general bacteria and pathogenic microorganisms such as Escherichia coli, Staphylococcus aureus, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, and Bacillus cereus at temperatures ranging from $170^{\circ}C$ to $230^{\circ}C$ and for 3.0 to 5.5 seconds at a time. Before the secondary roasting process, pathogenic microorganisms were all negative, although the presence of general bacteria was still detected. General bacteria was reduced to $1.0{\times}10CFU/g$ after the temperature was set at $230^{\circ}C$ for a period of 5.5 seconds. In conclusion, it suggested that a HACCP plan was necessary for management standard and systematic approach in the establishment of critical limit, problem resolution, verification method, education, and records management through a secondary roasting process.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.366-381
• /
• 2019

Purpose: The purpose of this study was to evaluate the effectiveness of conventional sandblasted, large-grit, acid-etched (SLA) surface coated with a pH buffering solution based on surface wettability, blood protein adhesion, osteoblast affinity, and platelet adhesion and activation. Methods: Titanium discs and implants with conventional SLA surface (SA), SLA surface in an aqueous calcium chloride solution (CA), and SLA surface with a pH buffering agent (SOI) were prepared. The wetting velocity was measured by the number of threads wetted by blood over an interval of time. Serum albumin adsorption was tested using the bicinchoninic acid assay and by measuring fluorescence intensity. Osteoblast activity assays (osteoblast adhesion, proliferation, differentiation, mineralization, and migration) were also performed, and platelet adhesion and activation assays were conducted. Results: In both the wetting velocity test and the serum albumin adsorption assay, the SOI surface displayed a significantly higher wetting velocity than the SA surface (P=0.000 and P=0.000, respectively). In the osteoblast adhesion, proliferation, differentiation, and mineralization tests, the mean values for SOI were all higher than those for SA and CA. On the osteoblast migration, platelet adhesion, and activation tests, SOI also showed significantly higher values than SA (P=0.040, P=0.000, and P=0.000, respectively). Conclusions: SOI exhibited higher hydrophilicity and affinity for proteins, cells, and platelets than SA. Within the limits of this study, it may be concluded that coating an implant with a pH buffering agent can induce the attachment of platelets, proteins, and cells to the implant surface. Further studies should be conducted to directly compare SOI with other conventional surfaces with regard to its safety and effectiveness in clinical settings.

• Journal of Life Science
• /
• v.28 no.1
• /
• pp.78-82
• /
• 2018

Detection of pathogenic microorganisms takes several days by conventional methods. It is necessary to assess microorganisms in a timely manner to reduce the risk of spreading infection. For this purpose, bacteriophages are chosen for use as a biosensing tool due to their host specificity, wide abundance, and safety. However, their lytic cycle limits their efficacy as biosensors. Phage proteins involved in binding to bacteria could be a robust alternative in resolving this drawback. Here, a fragment of tail protein J (residues 784 to 1,132) of phage lambda fused with 6X His-tag (6HN-J) at its N-terminus was cloned, overexpressed, purified, and characterized for its binding with microorganisms. The purified protein demonstrated a size of about 38 kDa in sodium dodecyl sulfate - polyacrylamide gel electrophoresis (SDS-PAGE) and bound with anti-His monoclonal antibodies. It bound specifically to Escherichia coli K-12, and not Salmonella typhimurium, Bacillus subtilis, or Pseudomonas aeruginosa in dot blotting. Binding of the protein to E. coli K-12 inhibited about 50% of the in vivo adsorption of the phage lambda to host cells at a concentration of $1{\mu}g/ml$ 6HN-J protein and almost 100% at $25{\mu}g/ml$ 6HN-J. The results suggest that a fusion viral protein could be utilized as a biosensing element (e.g., protein chips) for detecting microorganisms in real time.

• Convergence Security Journal
• /
• v.14 no.3_2
• /
• pp.99-109
• /
• 2014

Disaster is when, where, and how uncertainties, which might occur. Thus, for disaster response and management at the national and local governments have been made. Korea has established the Disaster and Safety Management Basic Act. Disaster Management has been made at the national level which is to prevent disasters and countries in order to protect citizens from harm and dangerous. Korean Disaster management system is well equipped with advanced countries. The Organization of national and local government are well-maintained substantially for the disaster activities and step-by-step manuals activities. Despite that uncertainty, due to the nature of the disaster, while infrequent, causing large-scale tragedy. Minimize the damage of the disaster as a disaster management efforts are needed. Normally a real disaster, a disaster situation, efforts are to be utilized efficiently, the effectiveness of the system will appear. But while the number of large-scale disasters, including the sinking of Sewol this time for the government and local governments see the response process, the system did not work and the manual existed in the cabinet. There was no Prevention and preparation activities, there was no integrated organization for the response management with expertise in the professional staff. Whenever a large disaster raised repeatedly as a problem, but there was a substantial change in formal but no improvement. It will not reduce the damage if the disaster management is not prepared for a revolutionary turning point.