• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제4권1호
• /
• pp.41-50
• /
• 2006

In this paper, sets of engineering analyses were conducted to renew the overall dimensions and configurations of a disposal container proposed as a prototype in the previous study. Such efforts and calculation results can provide new design variables such as the inner basket array type and thickness of the outer shell and the lid & bottom of a spent nuclear fuel disposal container. These efforts include radiation shielding and nuclear criticality analyses to check to see whether the dimensions of the container proposed from the mechanical structural analyses can provide a nuclear safety or not. According to the results of the structural analysis of a PWR disposal container by varying the diameter of the container insert, the Maximum Von Mises stress from the 102 cm-container meets the safety factor of 2.0 for both extreme and normal load conditions. This container also satisfies the nuclear criticality and radiation safety limits. This decrease in the diameter results in a weight loss of a container by $\sim20$ tons.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.153-162
• /
• 2005

In this Paper, sets of engineering analyses were conducted to renew the overall dimensions and configurations of a disposal container proposed as a prototype in the previous study. Such efforts and calculation results can provide new design variables such as the inner basket array type and thickness of the outer shell and the lid & bottom of a spent nuclear fuel disposal container. These efforts include radiation shielding and nuclear criticality analyses to check to see whether the dimensions of the container proposed from the mechanical structural analyses can provide a nuclear safety or not. According to the results of the structural analysis of a PWR disposal container by varying the diameter of the container insert, the Maximum Von Mises stress from the 102 cm container meets the safety factor of 2.0 for both extreme and normal load conditions. This container also satisfies the nuclear criticality and radiation safety limits. This decrease in the diameter results in a weight loss of a container by ${\~}$20 tons.

• Journal of the Korean Institute of Gas
• /
• 제23권6호
• /
• pp.17-24
• /
• 2019

The combustion properties of the flammable substance used in industrial fields include lower/upper flash point, lower/upper explosion limit, autoignition temperature(AIT), fire point, and minimum oxygen concentration(MOC) etc.. The accurate assessment of these characteristics should be made for process and worker safety. In this study, tert-amylalcohol(TAA), which is widely used as a solvent for epoxy resins, oxidizers of olefins, fuel oils and biomass, was selected. The reason is that there are few researches on the reliability of combustion characteristics compared to other flammable materials. The flash point of the TAA was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of the TAA was measured by ASTM 659E. The lower/upper explosion limits of the TAA was estimated using the measured lower/upper flash points by Setaflash tester. The flash point of the TAA by using Setaflash and Pensky-Martens closed-cup testers were experimented at 19 ℃ and 21 ℃, respectively. The flash points of the TAA by Tag and Cleveland open cup testers were experimented at 28 ℃ and 34 ℃, respectively. The AIT of the TAA was experimented at 437 ℃. The LEL and UEL calculated by using lower and upper flash point of Setaflash were calculated at 1.10 vol% and 11.95 vol%, respectively.

• Journal of the Korean Chemical Society
• /
• 제62권3호
• /
• pp.181-186
• /
• 2018

Nitrosamines are the nitrosocompounds which are produced by nitrosation reactions of the secondary amine and nitrite, and has been found to be produced through the vulcanization process during the production of rubber products Recently, nitrosamines have been detected in rubber products and become a major topic. Condoms are disposable medical devices, so safety is important because they come into direct contact with the skin and mucous membranes. In this study, we developed an analytical method for nitrosamines in condoms by applying ISO 29941 method. The samples were eluted by distilled water, and target compounds were extracted by liquid-liquid extraction with dichloromethane. And then after concentrated, and quantitatively analyzed by LC-MS/MS. The accuracies of the analytical method were ranged from 85.8 to 108.7%, precisions were lower than 11.5%, and the detection limits were from 0.11 (NDPA and NDBA) to 0.48 (NPYR) ng/mL. Among the 31 condom samples, NDBA was detected from 2 cases by extraction of distilled water, and NDMA were detected from 1 case, NDEA from 4 cases and NDBA from 26 cases by extraction of artificial saliva (pH 4.5). The total amount of nitrosamines in all samples were less than $500{\mu}g/kg$.

• Korean Journal of Environmental Agriculture
• /
• 제30권3호
• /
• pp.339-345
• /
• 2011

BACKGROUND: Recently in Korea, the import of agricultural products is rising due to the increasing amount of trade. Unregistered pesticides, allidochlor, propachlor, propham, cycloate, diallate and pebulate are widely used as pesticides for rice cultivation in foreign countries, while they are not registered in Korea. Therefore, the residue amount of imported agri-foods should be verified using the proper official analytical method for each of them that has not registered in Korea. METHODS AND RESULTS: This work was conducted to apply the official method of Korea Food & Drug Administration (KFDA) for determining multi class pesticide multiresidues in agricultural commodities. Brown rice and orange which have different characteristics as a matrix were selected as representative samples for residue analysis. The recoveries of cycloate, diallate and pebulate by GC/MS in fortified brown rice and orange with levels of 0.04~0.4 mg/kg were ranged from 82.8% to 110.3%. The quantification limits of three pesticides in brown rice and orange were 0.04 mg/kg. CONCLUSION: As a result, this method can surely be used as an official method for routine analysis of unregistered pesticides in Korea for imported agri-food.

• Korean Journal of Food Science and Technology
• /
• 제46권3호
• /
• pp.276-282
• /
• 2014

An accurate and sensitive analytical method was established for the simultaneous determination of synephrine and n-methyltyramine contents by ultra-performance liquid chromatography (UPLC) with a fluorescence detector (FLD). A 70:30 (v/v) mixture of 10 mM sodium dodecyl sulfate (SDS) and acetonitrile was used as the mobile phase. The coefficient of correlation ($r^2$) was 0.9999 for both synephrine and n-methyltyramine, and their limits of detection (LOD) were 0.02 and 0.01 mg/kg, respectively. The percentage recoveries for synephrine and n-methyltyramine were 96.4% and 100.9%, respectively, from bitter orange (Citrus aurantium) samples. The synephrine and n-methyltyramine contents were 38.07-118.21 mg/kg and 0.27-0.56 mg/kg, respectively, in the orange fruit samples, while they were 14.61-120.39 mg/kg and up to 3.34 mg/kg, respectively, in the tested commercial orange juice samples. The differences in synephrine and n-methyltyramine content between orange fruit and commercial orange juice were not significant (p<0.05). These results suggest that UPLC-FLD can be applied to develop an analytical method of quality control for commercial orange juice.

• Journal of Food Hygiene and Safety
• /
• 제29권1호
• /
• pp.16-20
• /
• 2014

The prevalence of Bacillus cereus was determined in salad and Kimbab obtained from commercial retailers. Among the 100 salad samples analyzed, 54 samples were negative for B. cereus, whereas the bacterial count was < 10 colony forming units (CFU)/g in 8 samples, < 100 CFU/g in 25 samples, < 1,000 CFU/g in 11 samples, and > 1,000 CFU/g in 2 samples. The mean (standard deviation) was 1.18 log CFU/g (${\pm}0.71$ log CFU/g). In Kimbab, B. cereus was isolated from 20 samples; the mean bacterial count was 1.01 log CFU/g (${\pm}0.71$ log CFU/g). On the basis of the monitoring data, a statistical sampling plan was determined with the NEW sampleplan program (ICMSF), which was used as an analytical tool. To identify the most suitable sampling plan, the microbial limits (m, M) and the maximum allowable number of sample units yielding unsatisfactory test results (c) were varied, but the number of samples units, n = 5, was fixed. Sampling plans showing an acceptable probability (Pa) over 0.95 were considered suitable. Two plans (A and B) were finally suggested. Parameters for plan A are n = 5, c = 0, m = 1,000, and M = 10,000 and for plan B are n = 5, c = 2, m = 100, and M = 1,000. Interestingly, the latter plan was identical to the microbial sampling plan used in New Zealand. Thus, it was concluded that the suggested plan can be used as a sampling plan that is in line with international standards.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제24권3호
• /
• pp.107-112
• /
• 2018

The purpose of this study was to investigate the migration levels of lead (Pb), cadmium (Cd) and arsenic (As) from polycarbonate food contact materials into food simulant at different temperatures ($70^{\circ}C$ and $100^{\circ}C$). The method was validated by linearity of calibration curves, limit of detection (LOD), limit of quantification (LOQ), recovery, precision and uncertainty. All of 200 samples, including bottles, cups, containers, ladles, spoons and tongs were purchased from domestic markets and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Mean concentrations of positive samples were higher at $100^{\circ}C$ than $70^{\circ}C$ as showing a dependency of migration temperature. The migration concentrations ranged from not-detected (ND) to $4.67{\mu}g/L$, ND to $0.49{\mu}g/L$L and ND to $2.91{\mu}g/L$ for Pb, Cd and As, respectively, which were far below the migration limits of Korea standards and specifications for food utensils, containers and packages.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제33권2호
• /
• pp.230-246
• /
• 2023

Objectives: The climate crisis has arrived and heat-related illnesses are increasing. It is necessary to discover new high-heat risk industries and understand the environment . It is also necessary to prioritize risks of industries that have not been included in the management target to date. The study was intended to monitor and evaluate the thermal risk of high-priority workplaces. Methods: A prioritization method was developed based on five factors: occurrence of and death due to heat-related illnesses, work environment monitoring, indoor work rate, small heat source, and limited heat dissipation. it, was applied to industrial accidents caused by heat-related illnesses. Wet bulb temperature index and apparent temperature were measured in July and August at 24 workplaces in seven industries and assessed for thermal risk. Results: The wet bulb temperature index was in the range of 23.8~31.9℃, and exposure limits were exceeded in the growing of crops, food services activities and accommodation, and building construction. The apparent temperature was in the range of 26.8~36.7℃, and exceeded the temperature standard for issuing heatwave warnings in growing of crops, food services activities and accommodation, warehousing, welding, and building construction. Both temperature index in growing of crops and building construction were higher than the outside air temperature. Conclusions: In the workplace, risks in industries that have not be controlled and recognized through existing systems was identified. it is necessary to provide break times according to the work-rest time ratio required during dangerous time period.

• The Korean Journal of Pesticide Science
• /
• 제19권3호
• /
• pp.161-173
• /
• 2015

The multiresidue method 4.1.2.2 in Korea Food Code was extended for the analysis of 24 unregistered pesticide residues. The method includes acetonitrile extraction, liquid-liquid partition, Florisil SPE clean-up and GC analysis. The limits of quantification (LOQ) range of the method was 0.02~0.05 mg/kg for orange, brown rice and banana. The linearity for targeted pesticides were $R^2$ > 0.99 at the level ranged from 0.05 to 5 mg/L. Recovery test was performed at two concentration levels of LOQ and 4~10 times of LOQ. Recoveries and relative standard deviations (RSDs) of target pesticides were acceptable, showing 70~120% range and less than 20%, respectively, except for ethiprole, picloram and sulcotrion. This method is effectively applicable to routine analysis of target pesticides in orange, brown rice and banana.