• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.164-173
• /
• 2002

The first product liability laws went into effect in Korea in July 2002. A person who suffers personal injury or damage to property due to defects in a product may sue both the manufacturer and the seller of the product under the principles of Korea tort law. This paper presents an integrated methodology which is called the QDRD(Quality deployment and reliability deployment) for hazards analysis in new product designs. QDRD applies QFD, FMEA and FTA to identify the hazards component, hazardous situations and hazardous events which could lead to an accident. An example is provided to demonstrate hazards analysis on a product using the QDRD method.

• International Journal of Reliability and Applications
• /
• v.4 no.4
• /
• pp.183-190
• /
• 2003

Rail breaks and derailments can cause a huge loss to rail players due to loss of service, revenue, property or even life. Maintenance has huge impact on reliability and safety of railroads. It is important to identify factors behind rail degradation and their risks associated with rail breaks and derailments. Development of mathematical models is essential for prediction and prevention of risks due to rail and wheel set damages, rail breaks and derailments. This paper addresses identification of hazard modes, estimation of probability of those hazards under operating, curve and environmental condition, probability of detection of potential hazards before happening and severity of those hazards for informed strategic decisions. Emphasis is put on optimal maintenance and operational decisions. Real life data is used for illustration.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1231-1236
• /
• 2009

Many work-related risk factors can cause construction site hazards. Therefore, safety management begins with measuring the magnitude of risk involved in a project. This study proposes a methodology for risk assessment of major trades at a particular construction site. To assess risk, this methodology integrates hazard severity and frequency, and their magnitude is calculated based on actual work-site hazards. This methodology also considers the influence factors that affect the frequency of work-related hazards. To select the appropriate influence factors, a two step approach is deployed. First, the predominant factors are identified through a literature review. Second, a selective process filters out the influence factors that are difficult to analyze quantitatively, and these extracted factors are weighted using expert surveys. Finally, the factors are combined and a quantitative risk assessment methodology is proposed.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.321-323
• /
• 2015

Monitoring crane motion in real time is the first step to identifying and mitigating crane-related hazards on construction sites. However, no accurate and reliable crane motion capturing technique is available to serve this purpose. The objective of this research is to explore a method for real-time crane motion capturing and investigate an approach for assisting hazard detection. To achieve this goal, this research employed various techniques including: 1) a sensor-based method that accurately, reliably, and comprehensively captures crane motions in real-time; 2) computationally efficient algorithms for fusing and processing sensing data (e.g., distance, angle, acceleration) from different types of sensors; 3) an approach that integrates crane motion data with known as-is environment data to detect hazards associated with lifting tasks; and 4) a strategy that effectively presents crane operator with crane motion information and warn them with potential hazards. A prototype system was developed and tested on a real crane in a field environment. The results show that the system is able to continuously and accurately monitor crane motion in real-time.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.81-86
• /
• 1995

In order to apply to analysis methods of mechanism and cross tabulation methods for the influence factors by the accident types to the object of accidents which occurred in R.C and P.C methods among the accidents in construction work sites, the latent hazards in P.C method are evaluated from the data of accidents in H Company from Jan. 1, 1993 to Dec. 31, 1993. The relationship between accident types and unsafe acts, unsafe conditions are recognized and the hazards of R.C method and P.C method are compared from the data acquired by the analysis of causes for a kind of occurrence mechanism. In conclusions, the items such as causes of accidents, accidents types, occurrence time, and the characteristics, are concentrated on one side in the P.C method, which is quite different from R.C method. Therefore the control method for the accident causes is easily established with a lot of effective advantages. The frequency and severity of accidents in P.C method are so low in comparison with R.C method.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.86-92
• /
• 1997

Demand of LPG and LNG will increase continuously due to high calories, clearness, and convenience for usage. These gases are used widely for power plants, industrial plants, and domestic fuel. But accidents related with gas are increasing in proportion to increment of gas usage. Especially LPG has high ignitability due to weak dispersion to air and accumulation at low place because LPG is heavier than air. There are many hazards during transportation as well as production, storage, and usage of LPG. Commonly, tank lorry is used for inland transportation of LPG. If tank lorry were to raise leakage incidents and then LPG released during transporting, the accidents cause serious effects on the environment as well as human damage of surrounding area. In this study, therefore, hazards which cause LPG of tank lorry to leak during transportation were identified and risk of LPG transportation was assessed quantitatively. Also, the result of this study might be a useful measure for predicting damage and preparing safe transportation strategies of LPG tank lorry.

• Journal of the Korean Society of Safety
• /
• v.8 no.2
• /
• pp.87-93
• /
• 1993

Many methods to assess hazards caused by the risks increased with the growth of petrochemical industry. The manual of International Atomic Energy Agency which was much more applied to quantitative analysis of the real situation and the CPQRA is introduced to verify the theoretical background of this manual. Than other methods, as a result, we can see that this manual, which is simple to use and requires a little information, shows similar results to those of calculation by numerical formula. Also, the program code of this manual was materialized and if it is possible to obtain adequate parameters to our circumstance, the manual will be quite useful in early risk analysis.

• Environmental Analysis Health and Toxicology
• /
• v.30
• /
• pp.17.1-17.6
• /
• 2015

Objectives In this study, the possibility of using existing test data provided in Korea and elsewhere for the registration of chemical substances was examined. Data on 510 chemical substances that are among the first subject to registration under the "Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH)" were analyzed. Methods The possibility of using existing data from 16 reference databases was examined for 510 chemical substances notified in July 2015 as being subject to registration. Results Test data with the reliability required for the registration of chemical substances under the K-REACH constituted 48.4% of the required physicochemical characteristics, 6.5% of the required health hazards, and 9.4% of the required environmental hazards. Conclusions Some existing test data were not within the scope of this research, including data used for registration in the European Union (EU). Thus, considering that 350 of these 510 species are registered in EU Registration, Evaluation, Authorisation & Restriction of Chemicals, more test data may exist that can be utilized in addition to the data identified in this study. Furthermore, the K-REACH states that non-testing data (test results predicted through Read Across, Quantitative Structure-Activity Relationships) and the weight of evidence (test results predicted based on test data with low reliability) can also be utilized for registration data. Therefore, if methods for using such data were actively reviewed, it would be possible to reduce the cost of securing test data required for the registration of chemical substances.

• Korean Journal of Veterinary Research
• /
• v.44 no.4
• /
• pp.593-605
• /
• 2004

An egg has been considered as one of the most important food sources because of it's nutritional superiority and reasonable price. With the complexity of egg flow system from production to consumption in Korea, preventive measures for egg safety have been required. Therefore, our study was carried out to analyze hazards for the egg under farm level and develope preventive measures with a purpose of obtaining egg safety. To analyze biological hazards, microbial contamination of egg(normal, dirty and cracked), water, feed, manure and equipments associated with laying were investigated. One isolate of Salmonella enteritidis and S. bardo were detected from the manure and dirty egg shell respectively. The sanitary conditions in the farm were surveyed by questionaries. Confirmation of vaccination for purchasing chicks and establishment of sanitary guidances for water and type of water suppliers ought to be preceded. Feed supplier systems including feed tanks, feed pipes and hoppers were known that their contamination might give it a chance to infect individuals and egg content and shell. The safe and rapid disposal of dead chickens and rodent were reported as more crucial factors to prevent infectious disease and manage good sanitation. Egg selector and collecting belt should be kept properly not to be contaminated from egg fluids and feces. It should be also considered that regular gathering of eggs, removal of dirty or cracked ones, storage under refrigeration and the use of disposable egg tray were continuously fulfilled. Conclusively, Our results suggested that HACCP-based system for providing fresh and safe eggs to consumers should be applied to the farm.

• Journal of Ship and Ocean Technology
• /
• v.1 no.2
• /
• pp.31-40
• /
• 1997

The paper begin by examining shipbuilding in the context of competitiveness, specification and cost-effectiveness before considering the impact of safety requirements in the its operations. The basis of the safety case approach is then given, and its application to shipbuilding is illustrated by an example based on the use of staging in ship construction. The key conclusion is that the safety case approach provides the management with a technique for treating potential hazards in shipbuilding so that their risks can be kept within an acceptable level.