• 한국안전학회지
• /
• 제32권5호
• /
• pp.54-61
• /
• 2017

The purpose of this study is to develop standard reference materials for safety control of construction materials considering the required performance of standard materials including flow performance incorporating particles. The flow characteristics of concrete are very complicated depending on mixing proportions of constituent materials, admixtures, amount of mixing, type of mixer, time of mixing, temperature and so forth. Uncertainties and multidimensional properties of concrete have been evaluated through various studies but there are few researches for the development of standard reference material. In this study, based on the rheological concept, the flow performance of construction materials was evaluated to understand the properties of standard reference materials and was finally obtained representing materials which simulate the standard reference materials.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.503-509
• /
• 2021

Objectives: The utility of the system was analyzed by applying the smart safety technology system to the aging pipe rehabilitation facility construction classified as a confined space. Methods: Smart safety management system was applied to a site where the aging pipe rehabilitation work was in progress. The working environment was measured for 25 days, and the toxic gas saturation was analyzed according to the working time and working place. Results: Based on the measured results, two characteristic environmental changes in the confined space were confirmed. First, when working inside an aging pipe, the tendency of carbon dioxide saturation increases with working time and the number of workers. Second, oxygen decreases when working in a space away from the entrance. Conclusions: Various applications of smart safety technology have been confirmed based on the measured data, and this is expected to be useful for environmental characteristic analysis and safety management when applied to a confined space composed with various conditions in the future.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.92-96
• /
• 2015

Due to unique characteristics of small construction companies, safety management is comprised of complex problems (e.g., resources constraints, a lack of formalized management structures, low level of management safety commitment etc.). In order to understand causal interdependencies between safety factors at different system levels (regulation, organization, technical and individual), this paper aims to develop a system dynamics (SD) model of safety management in small construction companies. The purpose of the SD model is to better understand why small construction companies have low level of safety performance. A causal loop diagram (CLD) was developed based on literature, with an attempt to map causal relationships between variables. The CLD was then converted into stock and flow diagram for simulation. Various tests were conducted to build confidence in the model's ability to represent the reality. A number of policies were analyzed by changing the value of parameters. The value of a system dynamics approach to safety management in small construction companies is its ability to address joint effects of multiple safety risk factors on safety performance with a systems thinking perspective. By taking into account feedback loops and non-linear relationships, such a system dynamics model provides insights into the complex causes of relatively poor safety performance of small construction companies and improvement strategies.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.18-25
• /
• 2021

Specialty contractor facilities, which involve a combination of welding and commissioning, face a high risk of serious accidents such as fire, explosion, and suffocation associated with welding work, nitrogen, and argon use. In such facilities, the organizational safety culture has considerable impact on the frequency of accidents. In this study, a safety culture evaluation was conducted on specialty contractors. NOSACQ-50, a standardized survey method on safety culture, was selected as an assessment tool to evaluate the safety culture in specialized construction companies that could not afford to invest heavily in safety. The self-administered questionnaire survey was conducted with 201 workers of four construction companies and the results were analyzed. It was found that in companies with low safety culture, the occurrence of irrationality was 66.0%, while in companies with high safety culture, the occurrence of irrationality was 42.6%. Thus, the difference in the occurrence of irrationality by safety culture was statistically significant. The difference in safety culture level according to the experience of occurrence of irrationality was also significant. It was also found that the higher the belief in safety management authorization, safety responsibilities of managers, worker safety priorities, and safety system effects, the lower the probability of irrationality.

• Safety and Health at Work
• /
• 제12권2호
• /
• pp.192-200
• /
• 2021

Background: A number of accidents have occurred in small and medium enterprises (SMEs). Efforts in reducing accidents have been undertaken through the implementation of safety behaviors. Unfortunately, few studies have examined motives behind unsafe behaviors, such as safety silence motives. This study aimed to observe the motives underlying safety behaviors, namely safety silence motive (SSM) (SSM-relation, SSM-climate, SSM-issue, and SSM-job) and to evaluate the effect of SSM and safety communication on safety participation in different industrial sectors and scales. Materials and Methods: Eighty workers from two industrial sectors and scales of SMEs were involved. They were instructed to fill out a set of questionnaires. A five-Likert scale was used to respond. An independent t test was applied to find any significant differences. The partial least square-structural equation modeling for multigroup was used to develop a model on relations among the variables. Results: The results showed that SSM scores were high in SMEs, and the scores were different across industrial sectors and scales. SSM had a negative influence on safety communication, and safety communication positively influenced safety participation. Conclusion: The study of SSM, safety communication, and safety participation in different sectors and scales should be separated in SMEs.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.69-75
• /
• 2002

Current fire safety in the construction sites has developed piecemeal over a considerable period of time. However, the law and regulation of fire safety is insufficient to protect fro in the construction sites. The frequency of fire in the construction sites is very rare but it brings longterm deterioration durability of building structure and large scale industrial calamity. There are many process of works and each work deals with many kind of flammable material, so it is very difficult to find a proper safety fire prevention. This study executed the questionnaire and fire experiment of the welding work to provide effective fire prevention counterplan.

• 대한안전경영과학회지
• /
• 제9권4호
• /
• pp.39-47
• /
• 2007

An industrial injury prevention has a basis on fundamental spirit of human respect rather than only injury prevention in company. The employer should recognize employee as a core part of an industrial management and use as a starting point of safety and health management rather than means of production. There are many reason for unsafety action without safety operation. The reason is no standard safety operation in company or the workers never get a enough education. Standard safety operation is prepared by paper for accurate directions and orders and operators must read the paper to prevent an error of action. Also an essential particular is safety of equipment and machine must be assumed to establish standard safety operation then safety of operations will be possible.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 추계학술논문발표회 논문집
• /
• pp.332-337
• /
• 2007

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.346-350
• /
• 2021

Background: The high sensitivity of individuals toward safety information in production activities, that is, attentional bias toward safety (ABS), can positively predict safe behaviors. It has become a hot topic in current organizational safety behavior research. However, there is no literature on its modification method. Methods: Based on the modified dot-probe task, we designed a modification training method of ABS. The training method required subjects to respond to the location of detection points that presented after safety stimulus and neutral stimulus pictures. Subjects' attentional bias values of safety and neutral pictures were measured during the experiment. Twenty-one students were selected and divided into a control group and training group to gain comparable results. Results: A novel training method was developed in this study to promote the efficacy of safety stimulus by activating ABS of the subjects. Moreover, repeated trainings and preacquired relative knowledge can enhance this effect. Conclusion: This study develops an experimental approach to evaluate the effectiveness of safety education and safety training, and also provides a new research idea for accident prevention.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.78-86
• /
• 2019

Various safety measures have been established and implemented in order to reduce construction accidents. However, statistics data on at construction sites still show higher accident and mortality rates than other industries. As a result of investigating the causes of accidents occurring in the construction industry, most accidents resulted from the failure of the system. Therefore, the existing safety management system of the construction site is monitored so that it operates properly in the field, and it is an important factor to actively participate in construction work. In order to overcome this, the government emphasized on-site inspections and planning and implementation confirmation by public institutes to ensure the effectiveness of the safety management system through amendment of the Construction Technology Promotion Act, but the orderer' safety capability and manpower are insufficient at present. Therefore, in this study, the safety management system, such as design for safety, safety management plan, safety check, safety management cost, etc. specified in the Construction Technology Promotion Act, is regularly checked and confirmed to improve the effectiveness of the safety management system as well as to improve the safety management system of the construction site by deriving measures to strengthen the public function of the government.