• 한국안전학회지
• /
• 제37권3호
• /
• pp.45-51
• /
• 2022

This paper focuses on a recently proposed asymmetric base-isolation coupling control system (ABiCS) for the vibration control of adjacent twin buildings. The ABiCS consists of inter-story diagonal dampers, a connecting damper between the two buildings, and a seismic isolation device at the base floor of one building. To investigate the control characteristics of ABiCS, a parametric study was performed by numerically simulating the 20-story twin buildings. In the parametric study, the control capacities of the inter-story diagonal dampers, connecting damper, and seismic isolation device were considered as varying parameters. The parametric study results indicate that the connecting damper between the two buildings reduces the responses of both buildings only at optimal or near-optimal capacity. In addition, adjusting the stiffness of the base isolation is found to be the most effective method for improving seismic performance and achieving cost-effectiveness. Accordingly, we presented a scenario-based performance improvement approach in which reducing the stiffness of the base isolation device could be an effective technique to improve the seismic performance of both buildings. However, note that checking the maximum allowable displacement of the base isolation device is essential.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.857-865
• /
• 2010

Recently the demand of the driverless rolling stock is increasing with advancement of the stable communication technique and control technique. The automatic train operating system has advantages which takes low operating cost and is able to dispose elastically in demand. Beside it provides high safety and effectiveness because it will be able to control power, signal and communication system from Operation Control Center and the safety and effectiveness are high. The establishment of PSD, Platform Screen Door, is advanced in the goal which is passenger safety, fire protection, noise and dust reduction etc. When but, two advanced systems also have risks of operation delay and accident when two systems are not controlled smoothly. Thus, I'll introduce control method between onboard controller, door control unit in rolling stock and PSD controller to help system design.

• 한국항해항만학회지
• /
• 제35권1호
• /
• pp.23-30
• /
• 2011

본 논문은, 국적일반화물선 공식안전성평가(Formal Safety Assessment, 이하 FSA) 연구의 1, 2 단계에 해당하는 위험요소 식별(Hazard identification) 및 식별된 사고 시나리오에 대한 위험도 분석(Risk analysis) 결과를 소개한 "국적일반화물선 초기안전성평가 연구(1)"에 이어 FSA 연구의 3, 4 그리고 5단계를 수행한 내용으로, 국적일반화물선의 운용 중 발생 가능한 위험을 저감할 수 있는 위험도제어방안들(Risk Control Options)을 식별하는 단계(Step 3)와 식별된 위험도제어방안들 중 전문가 의견수렴을 통하여 선별된 위험도제어방안들을 대상으로 한 비용-효과 평가 단계(Step 4: Cost-Benefit Assessment) 그리고 비용-효과 평가의 결과를 정리하여 국적일반화물선의 안전성 제고를 위한 구체적인 방안을 제안하는 단계(Step 5: Recommendation for Decision Making)의 결과를 소개하였다.

• 산경연구논집
• /
• 제10권11호
• /
• pp.57-69
• /
• 2019

Purpose: The purpose of this study is to investigate systematic and comprehensive explanation about safety behavior by applying integrated model of Theory of Planned Behavior (TPB) and Social Cognitive Theory (SCT). By showing the interrelationship of effects of factors affecting safety behavior in a single model, comprehensive understanding regarding safety behavior will be possible. Research design, data, and methodology: This study try to integrate the two theory, TPB and SCT, to introduce background factors, such as safety culture, affecting cognitive factors of subjective norm, safety attitude, perceived behavioral control, safety consciousness, which are again affecting behavior intention of the TPB. We composed 73 questionnaire to analyse the relationship among factors affecting safety behavior. The questionnaire were distributed to stewards and stewardesses of KAL, ASIANA, and LCCs. 422 were collected and used for analysis. Factor analysis, regression analysis, and control effect analysis were conducted using SPSS windows version 2.0. Results: The safety culture, safety atmosphere, and safety education/training were turned out to affect subjective norm, safety attitude, perceived behavioral control, safety consciousness. And the cognitive factors also showed to affect safety intention significantly. The results that safety intention affects safety behavior was found. Also there are control effect of cost consciousness and punishment while safety intention affects safety behavior. Conclusions: Safety is the virtue that should be given first priority to in our daily life. To secure safety, everyone in an organization should have high level of safety intention and conduct safety behavior. The study results provide systematic and comprehensive understandings on the relationship among factors affecting cabin crews' safety behavior. The results will help design safety related regulations, education/training, and support employees to engage in safety behavior related activities.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.54-60
• /
• 2016

The bottom of dikes must be kept impermeable to control hazardous chemicals spilled from storage tanks. Currently, insufficient related chemical control laws lead to a possibility to spread through the bottom. Generally, due to the high cost of installation and periodical maintenance, many businesses prefer to install the bottom with general concrete. But, since the impermeability of concrete is dependent on the kind of materials and chemical reaction, all concrete cannot be considered as impermeable material. Thus, it is necessary to make the installation standards of the dike bottom clear in order to avoid the argument over the impermeability and prevent the chemical accident. This study has suggested the standards of impermeable concrete by conducting 7-day exposure test to crude oil with the pilot dikes. The results have showed that the standards have the better impermeable performance compared with the germany standard, which have been penetrated at the maximum penetration depth of 1.9 cm. This study is expected to contribute to both the risk reduction of penetrating into the bottom and the cost reduction of spending to make the bottom of dikes impermeable.

• Safety and Health at Work
• /
• 제14권4호
• /
• pp.406-414
• /
• 2023

Background: This study examined age-group differences in the rate, severity, and cost of injuries among construction workers to support evidence-based worker safety and health interventions in the construction industry. Methods: Ohio workers' compensation claims for construction workers were used to estimate claim rates and costs by age group. We analyzed claims data auto-coded into five event/exposure categories: transportation incidents; slips, trips, and falls (STFs); exposure to harmful substances and environments; contact with objects and equipment (COB); overexertion and bodily reaction. American Community Survey data were used to determine the percentage of workers in each age group. Results: From 2007-2017, among 72,416 accepted injury claims for ~166,000 construction full-time equivalent (FTE) per year, nearly half were caused by COB, followed by STFs (20%) and overexertion (20%). Claim rates related to COB and exposure to harmful substances and environments were highest among those 18-24 years old, with claim rates of 313.5 and 25.9 per 10,000 FTE, respectively. STFs increased with age, with the highest claim rates for those 55-64 years old (94.2 claims per 10,000 FTE). Overexertion claim rates increased and then declined with age, with the highest claim rate for those 35-44 years old (87.3 per 10,000 FTE). While younger workers had higher injury rates, older workers had higher proportions of lost-time claims and higher costs per claim. The total cost per FTE was highest for those 45-54 years old ($1,122 per FTE). Conclusion: The variation in rates of injury types by age suggests that age-specific prevention strategies may be useful.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.912-916
• /
• 2004

The home network is the technique to guarantee a safe, economical, socially integrated, and healthy life to the family and it provides domestic safety, instrument control, controllable energy and health monitoring by the connection of the home appliances using wired and wireless networks. A home control system has been developed for managing and controlling home appliances. This paper designs the broadband PLC home controller using broadband PLC technology which can save much cost at a network infrastructure using the existing power line at a home and design the USB home controller using USB technology which is low cost and has many goods with it. And the embedded home server manages those. The CDMA module provides mobile functions to the home control system in this paper. And we choose the OSGi specification which is compatible with other home middleware and can accept various communication techniques of home network

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2179-2194
• /
• 2010

RAMS is becoming increasingly important in the decision making process for the rolling stock projects in order to improve competitiveness by reducing system life cycle cost while improving reliability, availability, maintainability and safety. In order to apply and manage RAMS of rolling stock systems effectively in the operator perspective, it is essential to integrate and control RAMS systematically from the early stage of rolling stock projects. RAMS management is to implement a RAMS system into rolling stock projects in terms of a rolling stock operator, which presents the strategic directions of RAMS policy, objectives, requirements, control, analysis, measurement and improvement throughout life cycle of rolling stock projects. This article presents a new framework of RAMS management that provides an effective and efficient way for managing RAMS in rolling stock systems in the railway industry.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 추계학술대회
• /
• pp.147-160
• /
• 2013

이 논문은 공정변화를 보다 잘 감지할 수 있는 관리도의 개발동향에 주안점을 두고 있으며, 경제적 접근법으로 관리모수를 설정하여 공정관리 메카니즘을 사용하는데 있어서 최소의 비용을 가지도록 하여 품질 향상 비용을 절감시킬 수 있는 설계 접근방법을 조사 연구했다. 또한 CUSUM 관리도를 기존의 다양한 관리도와 결합하여 개발된 새로운 관리도를 비교했다. 비교된 관리도의 경제적 모형설계를 통하여 공정 품질에서의 경제적인 영향의 최적화를 위한 관리모수를 제시했다. 이는 공정평균의 이동을 감지하기 위한 결합 관리도를 개발하는 경제적설계 절차를 제시했다.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.53-58
• /
• 2008

This paper presents the findings obtained from the investigation of fatal disasters occurred by small-sized construction firms which have been accepted as to provide lower safety performance other than large-sized construction enterprises and cause more than half of the safety accidents in average. The study identifies the current status of safety performance provided by the small-sized construction contractors in details, find the issues involved with lack of safety performance, and suggest the improvement measures derived from the findings. A survey questionnaire was administered to the construction contractors, which are listed in the database of Construction Association of Korea as to fall into rank between 501st and 1000th in construction capacity. Safety issues such as the performance of safety management system, safety control structure, safety cost relative to safety control, education devoted to safety improvement, usage of safety garments or individual protective tools, and activities to maintain safety performance on site, etc were investigated from the study.