• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.30-40
• /
• 2022

The death rate in the construction industry, which is more than twice that of other industries, increases the need to solve chronic safety problems. In a situation in which the safety management measures that have been maintained thus far are unable to reduce construction accidents, the introduction of smart construction safety technology (SCST) that reflects the 4th industrial technology is required for the safety management of workers. Large corporations or public institutions have introduced SCST and are operating pilot sites, but SCST is still in its infancy and there have yet to exist field data regarding necessity and effectiveness. In this study, the concept of SCST, which has still to be established, is defined, and the actual condition of SCST was analyzed through a survey. Through the analysis of the necessity of SCST introduction, convenience, and effectiveness before and after its application, problems such as problems from the field point of view as well as other factors hindering the introduction of such technology are derived in detail. In addition, an effective combination of technologies for safety management at the current level is determined and an activation plan is presented.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2001

To establish an accurate asbestos analysis method for workplace samples, chrysotile, amosite, crocidolite, tremolite, actinolite, and anthophyllite asbestos fibers were analyzed for their morphology, atomic content and electron diffraction patterns. The morphology of asbestos fiber was evaluated in $10,000{\times}$ magnification. The atomic contents was analyzed by X-ray analyzer (TEM-EDX). Asbestos fibers were further assessed using electron diffraction (ED) patterns to provide an additional criterion for classifying the asbestos fibers. Twenty asbestos fibers were initially randomly selected for morphological evaluation; based on an aspect ratio (length : diameter = 3:1). Then the fibers were determined for their EDX spectrums and ED patterns. Our results showed that only chrysotile fiber has a hollow tube structure to be distinguished from other asbestos fibers. Although asbestos fibers had similar morphology, they had different EDX spectrums and ED patterns. Our results on the atomic content of asbestos fibers were very similar to those of other researchers, but amosite and crocidolite had a little difference in atomic content compared with the results from other researchers. The difference may be due to the difference in equipment or asbestos sample selection. A study on asbestos samples from biological specimens to establish a criterion for determining occupational asbestos exposed diseases should be done in the near future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2012

Objectives: This study was performed to provide harmonized guidelines on health and environmental classification criteria and its results of chemicals in Korea. Methods: Firstly, The history of GHS implementation in UN and Korea was reviewed. Secondly, the differences in classification criteria on health and environmental hazards among UN GHS and two Korean government agencies, Korea Ministry of Employment and Labour (KMoEL) and Korea Ministry of Environmental (KMoE). The classification results were compared between classifications of Korea Occupational Safety and Health Agency (KOSHA) based on KMoEL and classifications of Korea National Institute of Environmental Research (KNIER) based on KMoE. Finally, an inter-agency harmonization on the classification criteria and the results was suggested by comparing the classification results of 5 chemicals; Benzene, carbon disulfide, formaldehyde, toluene-2,4-diisocyanate, and trichloroethylene. Results: KMoEL and KMoE revised regulations on chemical management and published a Notices on GHS classification criteria according to UN GHS document. However, the hazard to the ozone layer contained in the latest edition of UN GHS document published in 2011 was not included yet. The differences in classifications of 5 chemicals between KOSHA and KNIER were 36.2% in health hazards and 23.4% in environmental hazards, respectively. In conclusion, we suggested that a new revision be needed to include newly contained hazard and inter-agency working party be organized to harmonize classification results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.371-380
• /
• 2022

Objectives: To ensure that employers handling petroleum compounds understand whether petroleum-based UVCB (unknown or variable composition, complex reaction products, or biological materials) substances contain hazardous substances and comply with the Occupational Safety and Health Act, petroleum-based UVCB substances were analyzed and the results from samples were compared with MSDS (Material Safety Data Sheet) contents. Methods: Twenty-one petroleum samples were analyzed using GC-MS (Gas Chromatography-Mass Spectrometry), targeting ten volatile organic compounds regulated by the Occupational Safety and Health Act. Results: The target chemicals were detected in 13 out of 21 samples. All 13 samples were in the naphtha (low boiling point naphthas (gasolines)) group. There were also naphtha group samples containing 2% benzene. Some naphtha samples used as solvents contained about 1% benzene. Conclusions: This study shows that naphtha group petroleum substances contain hazardous chemicals in many cases. In particular, if benzene, n-hexane, and toluene with low occupational exposure limits are contained above the limit concentration. Such information should be delivered in the article on MSDS legal regulations.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.517-527
• /
• 2023

Objectives: We examine cases of chemical poisoning that occurred in the cleaning of metal parts and the regulations on halogenated solvents in other countries and propose regulations necessary to prevent chemical poisoning from halogenated solvents. Methods: We collected cases of chemical poisoning through the website of the Korea Occupational Safety and Health Agency. A review of the literature was conducted focusing on regulations related to halogenated solvents in the United States and the European Union, particularly for cleaning metal parts. Among the Material Safety Data Sheets submitted to the government, MSDS containing eleven substances were extracted to confirm the composition and product use. We investigated cleaning methods for metal parts used in South Korea. For the hazard classification, the European Chemicals Agency or Japan's NITE's website was used. Results: In the case of poisoning, the cleaning methods involving trichloromethane were dipping and dry, which was not found in the literature. It was confirmed that many halogenated solvents and dimethyl carbonate were used for metal cleaning in South Korea. In vapor degreasing using TCE in the USA, even if the facility is strictly managed, such as by installing cooling coils in open cleaning facilities, the risk of exposure to TCE is considered to be not only carcinogenic but also a concern for acute and chronic effects. In comparison, exposure through Korean work methods such as dipping and drying operations is inevitably much higher. Conclusions: The transition to water-based cleaning with low-hazard chemicals should be a priority in the cleaning process. In the case of metal parts that require precise cleaning, if the use of a halogenated solvent is inevitable, a closed degreasing facility should be used to minimize exposure. The current regulations in the Occupational Safety and Health Act, the Chemical Substances Control Act, and the Air Environment Conservation Act do not require cleaning facilities to minimize emissions. To protect the health of workers using halogenated solvents to clean metal parts, regulations that require a fundamental reduction in exposure will be necessary.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1131-1136
• /
• 2013

Parabens, the esters of p-hydroxybenzoic acid, have been widely used as antimicrobial preservatives in cosmetic products, drugs, and processed foods and beverages. However, some parabens have been shown to have weak estrogenic effects through in vivo and in vitro studies. Because such widespread use has raised concerns about the potential human health risks associated with exposure to parabens, we developed a simultaneous analytical method to quantify 4 parabens (methyl, ethyl, propyl, and butyl) in human urine, by using solid-phase extraction and high-performance liquid chromatography coupled with triple quadrupole mass spectrometry. This method showed good specificity, linearity ($R^2$ > 0.999), accuracy (92.2-112.4%), precision (0.9-9.6%, CV), and recovery (95.7-102.0%). The LOQs for the 4 parabens were 1.0, 0.5, 0.2, and 0.5 ng/mL, respectively. This method could be used for quick and accurate analysis of a large number of human samples in epidemiological studies to assess the prevalence of human exposure to parabens.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.611-619
• /
• 2016

Objective:This study aims to analyze the relationships between personality factors measured by Minnesota Multiphasic Personality Inventory (MMPI) scales and the indices of safety and health in the shipbuilding industry. Background: Many researches reported that there were significant relationships between some MMPI subscales and traffic and industrial accidents. Method: This study analyzes 230 male workers in shipyard for their MMPI scores gathered during recruitment process and their safety and health indices from the performance record during their working period. ${\chi}^2-test$ and one-way ANOVA are used for finding the statistical significance for personality factors. The conventional grouping rule for MMPI scales and other grouping criteria considering the attitude of positive answer for the MMPI test during recruitment process are used for analysis. Results: The Hypomania (Ma) and Psychopathic Deviate (Pd) scales of the MMPI are the main factors related to the safety and health related indices for most grouping rules. Depression (D), Psychasthenia (Pt), Hypochondriasis (Hs), Schizophrenia (Sc), and Masculinity and Femininity (Mf) scales are also related to the safety and health indices. Conclusion and Application: The results can be used for understanding the psychological factors in human behaviors and safety and can help professional personnel take the necessary steps in improving safety on the job and also in providing the effective teaching of safe work methods.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.51-60
• /
• 2010

Objectives: The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. Methods: From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. Results: The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). Conclusion: These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.365-371
• /
• 2018

This article addresses three key issues. First, the commonalities, differences, strengths, and limitations of existing occupational safety and health (OSH) legislation of low- and middle-income countries were determined. Second, required revisions were identified and discussed to strengthen the laws in accordance with the best international practice. Finally, proposals for additional OSH laws and interventions were suggested. A literature search of OSH laws of 10 selected low- and middle-income countries was carried out. The laws were subjected to uniform review criteria. Although the agricultural sector employs more than 70% of the population, most of the reviewed countries lack OSH legislation on the sector. Existing OSH laws are gender insensitive, fragmented among various government departments, insufficient, outdated, and nondeterrent to perpetrators and lack incentives for compliance. Conclusively, the legal frameworks require reformation and harmonization for the collective benefit to employees, employers, and regulatory authorities. New OSH legislation for the agricultural sector is required.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2017

Objectives: This study aims to suggest definitions in accordance with the purpose of the permissible limit system in order to suggest criteria for substances with permissible exposure limits and expanded candidate substances under the Occupational Safety and Health Act in Korea. Methods: The occupational safety and health related acts from six countries were researched, including from Korea. To understand the health hazards of substances with permissible exposure limits, health hazards were prioritized for 211 substances through working environment measurement on the basis of KOSHA's preceding research. Results: To suggest criteria for substances with permissible exposure limits and expanded candidate substances, definitions were suggested in accordance with the purpose of the permissible limit system. Based on the health hazard priorities for the working environment, selection criteria were identified. Conclusions: Three suggestions for substances with permissible exposure limits were proposed including substances where occurred serious health hazards such as carcinogenicity, germ cell mutagenicity, and reproductive toxicity to workers.