• Analytical Science and Technology
• /
• v.36 no.1
• /
• pp.22-31
• /
• 2023

As the use of e-liquid cigarettes is rapidly increasing worldwide, it multiplies the potential risk undisclosed to the health of non- and smokers. To reduce the hazard, each country has its own set of regulations for controlling e-liquids. In Korea, the narrow definition of tobacco makes it difficult and have been steadily occurring tax evasion exploiting the difference in natural and artificial nicotine. Therefore, it is very important to distinguish source of nicotine for their regulation. To find biochemical discriminant markers, this study established analysis methods based on high-performance liquid chromatography coupled with diode array detector (HPLC-DAD) and high-performance liquid chromatography coupled with triple Quadrupole mass spectrometry (HPLC-MS/MS) for nicotine enantiomers and tobacco alkaloids targeted using the difference in pathways of nicotine biosynthesis and chemical synthesis. The method was validated by experimenting linearity (R² > 0.999), recovery (80.99-108.41 %), accuracy (94.11-109.73 %) and precision (0.04-8.27 %). Then, the results for discrimination of the nicotine obtained from analysis of 65 commercial e-liquid products available in Korean market was evaluated. The method successfully applied to the e-liquids and one sample labelled 'synthetic nicotine' for tax exemption was found to contain a natural nicotine product. This method can be used to determine whether an e-liquid product uses natural or artificial nicotine and monitor non-taxable e-liquid products. The method is more scientific than the existing one, which relies only on field evidence.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.128-135
• /
• 2018

Currently, the government selects products that are likely to cause harm to consumers as safety management targets and classifies them into three types: safety certification, safety confirmation, and supplier conformity verification. In addition, the government conducts safety surveys on products in circulation or accident products, and recalls products that are of great concern to consumer risks. In this paper, we have developed RAP (Risk Assessment method based on Probability), which is a probability based product risk assessment method, for the classification of safety management type of product and safety investigation, and have shown an application example. In this process, information is used for the CISS (Consumer Injury Surveillance System) of the Korean Consumer Agency. In addition, we apply the cluster analysis to classify the current supervised children products into three groups. Then, we confirm the effectiveness of RAP by comparing the result of RAP application, cluster analysis result and current safety management classification type. Also, we recognize the need to review the current safety management classification criteria for classifying products into three types.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.11
• /
• pp.57-69
• /
• 2019

Purpose: The purpose of this study is to investigate systematic and comprehensive explanation about safety behavior by applying integrated model of Theory of Planned Behavior (TPB) and Social Cognitive Theory (SCT). By showing the interrelationship of effects of factors affecting safety behavior in a single model, comprehensive understanding regarding safety behavior will be possible. Research design, data, and methodology: This study try to integrate the two theory, TPB and SCT, to introduce background factors, such as safety culture, affecting cognitive factors of subjective norm, safety attitude, perceived behavioral control, safety consciousness, which are again affecting behavior intention of the TPB. We composed 73 questionnaire to analyse the relationship among factors affecting safety behavior. The questionnaire were distributed to stewards and stewardesses of KAL, ASIANA, and LCCs. 422 were collected and used for analysis. Factor analysis, regression analysis, and control effect analysis were conducted using SPSS windows version 2.0. Results: The safety culture, safety atmosphere, and safety education/training were turned out to affect subjective norm, safety attitude, perceived behavioral control, safety consciousness. And the cognitive factors also showed to affect safety intention significantly. The results that safety intention affects safety behavior was found. Also there are control effect of cost consciousness and punishment while safety intention affects safety behavior. Conclusions: Safety is the virtue that should be given first priority to in our daily life. To secure safety, everyone in an organization should have high level of safety intention and conduct safety behavior. The study results provide systematic and comprehensive understandings on the relationship among factors affecting cabin crews' safety behavior. The results will help design safety related regulations, education/training, and support employees to engage in safety behavior related activities.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.52-58
• /
• 2015

Although lots of safety inspection and precision safety diagnosis have been conducted on concrete retaining wall, there is no comprehensive analysis on the basis of the accumulated data associated with the statistic. Especially, the concentrated management is necessary on the evaluation items that cause critical damages for the efficient performance. In this regard, this study conducted a correlation analysis between the 18 condition evaluation items and defect index for the concrete retaining wall as well as how each item affects the final defect index as much as in the manual. As a result, correlation coefficient between sliding and overturning was 0.601, which means that they have a strong correlation, and the most influential item on defect index is the condition of drainage that scored the 0.750 correlation coefficient. In addition, as a result of regression analysis, the condition of drainage with the 0.683 correlation coefficient has a strong correlation with the defect index. If the condition evaluation items are integrated or readjusted based on the results of the statistical analysis in this study, the more efficient and accurate maintenance will be possible.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.45-53
• /
• 2023

In order to solve the rapidly increasing domestic delivery volume and various problems in the recent metropolitan area, domestic researchers are conducting research on the development of "Urban Logistics System Using Underground Space" using existing urban railway facilities in the city. Safety analysis and scenario analysis should be performed for the safe system design of the new concept logistics system, but the scenario analysis techniques performed in previous studies so far do not have standards and are defined differently depending on the domain, subject, or purpose. In addition, it is necessary to improve the difficulty of clearly defining the control structure and the omission of UCA in the existing STPA safety analysis. In this study, an improved scenario table is proposed for the AGV horizontal transport device, which is a key equipment of an urban logistics system using underground space, and a process model is proposed by linking systematic STPA safety analysis and scenario analysis, and UCA and Control Structure Guidelines are provided to create a safety analysis.

• Korean Journal of Community Nutrition
• /
• v.25 no.2
• /
• pp.112-125
• /
• 2020

Objectives: Diet and incidence of chronic diseases are highly related. This study examined the characteristics of dietary safety awareness and competency for chronic disease prevention among adults. Methods: Data were collected from 247 adults in Daegu and Gyeongbuk areas using a self-administered questionnaire in May and June of 2018. Data were analyzed by frequency analysis, χ²-test, factor analysis, reliability analysis, t-test, one-way analysis of variances, and correlation. Results: The results of the factor analysis indicate that dietary safety awareness of health management was classified into chronic disease anxiety and obsession. Awareness of dietary safety management was sub-grouped into difficulty in acquiring knowledge, lack of awareness of over and malnutrition, food safety anxiety, importance of weight management, education requirement for cancer prevention, and knowledge. Dietary safety behavior composed of a balanced diet, unhealthy diet, and health-functional pursuit. Dietary safety management competency was comprised of health management, food management, and cooking. The competency scores of dietary safety management factors were significantly different according to sex, age, and education level (P < 0.05). Balanced diet factor was significantly correlated with knowledge, health-functional pursuit, health management, food management, and cooking capacity factors (P < 0.01). Conclusions: Active education for dietary safety management competency according to age, gender, and education level should provide dietary safety education to reduce anxiety and obsession regarding chronic diseases and sustainable health management.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.222-235
• /
• 2018

The hydrocarbon gas leak in the offshore plant can cause large accidents and lead to significant damages to human, property and environment. For prevention of fire or explosion accidents from gas leak, a SIS(Safety Instrumented System) should be installed. In the early stage of the offshore design, required SIL(Safety Integrated Level) is determined and reliability analysis is performed to verify the design in reliability aspects. This study collected data, information related to reliability analysis and created knowledge model of safety design for the offshore system with MBSE(Model-Based Systems Engineering) concept. Knowledge model could support safety engineer's design tasks as the guidance of reliability analysis procedure of safety design and make good conversation with other engineers in yard, class, company, etc.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.318-321
• /
• 2017

This commentary presents the regulatory backgrounds and development of the national proficiency testing (PT) scheme on asbestos analysis in the Republic of Korea. Since 2009, under the amended Occupational Safety and Health Act, the survey of asbestos in buildings and clearance test of asbestos removal works have been mandated to be carried out by the laboratories designated by the Ministry of Employment and Labor (MOEL) in the Republic of Korea. To assess the performance of asbestos laboratories, a PT scheme on asbestos analysis was launched by the Korea Occupational Safety and Health Agency (KOSHA) on behalf of the MOEL in 2007. Participating laboratories are evaluated once a year for fiber counting and bulk asbestos analysis by phase contrast microscopy and polarized light microscopy, respectively. Currently, the number of laboratory enrollments is > 200, and the percentage of passed laboratories is > 90. The current status and several significant changes in operation, sample preparations, and statistics of assigning the reference values of the KOSHA PT scheme on asbestos analysis are presented. Critical retrospect based on the experiences of operating the KOSHA PT scheme suggests considerations for developing a new national PT scheme for asbestos analysis.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.3
• /
• pp.187-195
• /
• 2010

Nanotechnology is the fastest growing area in scientific research and it has important applications in a wide variety of fields. Nevertheless, consumers encountered this new technology without any identification of risks and benefits. Also until now, there are no specific safety evaluation methods for nanotechnology. For this reason, we studied risk communication strategy for nanotechnology to prepare its application in commercialized products on public. A survey was conducted to identify the differences in perception between public (N=110) and expert (N=37) toward applied nanotechnology in food, drugs and cosmetic products. The survey results were used to draw up a risk cognitive map which was introduced by Paul Slovic, and the perception level of public and expert on nanotechnology was evaluated. As a result of the survey, public recognized nanotechnology as "unknown but low dread" risk factor, but expert recognized it as "unknown and high dread" risk factor. These results indicate that there are perception differences between two groups. Several risk communication strategies are reported including care, consensus and risk communication. In the case of nanotechnology, it contains both risks and benefits. Considering the nature of nanotechnology, the "consensus communication" which informs consumers about risks and benefits of issues is the most appropriate strategy.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.1-8
• /
• 2014

Safety certification and inspection of dangerous machines and equipments used in industries are to save lives of workers and properties involved. Cause analysis of industrial accidents is essential to prove the effectiveness of such certification and inspection. This study focuses on suggesting systematic method for cause analysis of industrial accidents associated with dangerous machines and devices. Incorporating transition from the current user-oriented indirect regulations to more manufacturer and user balanced direct regulations, suggested method coupled with safety certification, safety inspection, safety management and safety education will guarantee more effective prevention of industrial accidents.