• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.264-270
• /
• 2006

In this paper we present a safety plan to be applied to the development of the TCS(Train Control System). The safety plan that can be applied to the life cycle of a system, from the conceptual design to the dismantlement, shows the whole process of the paper work in detail through the establishment of a goal, analysis and assessment, the verification. In this paper we study about the making a plan, the preliminary hazard analysis, the hazard identification and analysis to guarantee the safety of the TCS. The process far the verification of the system safety is divided into several steps based on the target system and the approaching method. The guarantee of the system safety and the improvement of the system reliability is fellowed by the recommendation of the international standards.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.19-27
• /
• 2023

In this study, a total of 2,584 domestic research papers with the keywords "Aviation Safety" and "Aviation Accidents" were subjected to Text Mining analysis. Various text mining techniques, including keyword frequency analysis, word correlation analysis, network analysis, and topic modeling, were applied to examine the research trends in the field of aviation safety. The results revealed a significant increase in research using the keyword "Aviation Safety" since 2015, with over 300 papers published annually. Through keyword frequency analysis, it was observed that "Aircraft" was the most frequently mentioned term, followed by "Drones" and "Unmanned Aircraft." Phi coefficients were calculated for words closely related to "Aircraft," "Aviation," "Drones," and "Safety." Furthermore, topic modeling was employed to identify 12 distinct topics in the field of aviation safety and aviation accidents, allowing for an in-depth exploration of research trends.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.155-161
• /
• 2016

Distribution of various illegal or counterfeit drugs of seven approved erectile dysfunction drugs and their analogues has been increased, causing health problems such as cardiovascular disorder, tachycardia, headache, or vision disturbance. We used liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) to determine the erectile dysfunction drugs and their analogues in various counterfeit drugs. Eleven erectile dysfunction drugs and their analogues were detected, with sildenafil and its analogues being the most counterfeited compounds (73.8 %), followed by tadalafil and its analogues (25.4 %). The limits of detection (LOD) and the limits of quantitation (LOQ) of liquid-type and solid-type negative samples ranged from 0.1 to 3.3 ng/mL or ng/g and from 0.3 to 10.0 ng/mL or ng/g, respectively. The recoveries ranged from 84.3 to 112.3 % and 83.2 to 110.2 %, respectively. The contents of sildenafil and tadalafil in the various counterfeit drugs ranged from 21.0 to 947.5 mg/g and from 0.2 to 170.2 mg/g, respectively.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.15-26
• /
• 2002

The quantitative evaluation method of the safety management cost was suggested to prevent a gas accident as a major industrial accident. In a gas governor station, process risk assessments such as the fault tree analysis(FTA) and the consequence analysis were performed. Based on process risk assessments, potential accident costs were estimated and the cost-benefit analysis(CBA) was performed. From the cost-benefit analysis for five classification items of safety management cost, the order of the cost/benefit ratio was estimated.

• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.91-98
• /
• 2009

The "3+3 Process" for safety critical software for nuclear power plants' I&C (Instrumentation and Control system) has been developed in this work. The main idea of the "3+3 Process" is both to simplify the software development and safety analysis in three steps to fulfill the requirements of a software safety plan [1]. The "3-Step" software development process consists of formal modeling and simulation, automated code generation and coverage analysis between the model and the generated source codes. The "3-Step" safety analysis consists of HAZOP (hazard and operability analysis), FTA (fault tree analysis), and DV (design validation). Put together, these steps are called the "3+3 Process". This scheme of development and safety analysis minimizes the V&V work while increasing the safety and reliability of the software product. For assessment of this process, validation has been done through prototyping of the SDS (safety shut-down system) #1 for PHWR (Pressurized Heavy Water Reactor).

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2015

This study first addresses the ineffectiveness of indirect regulation on industrial machines. Analysis of causes of industrial accidents associated with industrial machines further reveals the fact that technical causes need to be resolved at the manufacturing stage to reduce the frequency and strength of industrial accidents. Balanced safety certification on manufacturers and safety inspection on users of industrial machines are then suggested to effectively resolve such technical causes. The effectiveness of such safety certification and safety inspection can be justified by cost-benefit analysis. Particularly, balance in expected benefits of safety certification and safety inspection is a key issue for validity of such analysis. The accumulated benefit-costs for press brake and portable sawing machine confirm the effectiveness of such safety system.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.32-42
• /
• 2020

In this study, in order to secure the necessity of introducing the safety certification system for the assembled temporary equipment and materials, the feasibility of the introduction was analyzed through literature review, structural analysis, and actual experiments and surveys related to the assembled temporary equipment and materials. In the previous studies, it was found that the research on the assembled temporary equipment and materials was insufficient, and it was possible to grasp the necessity of introducing the safety certification system for the assembled temporary equipment and materials. In addition, in the results of the serious accident analysis, it was found that the soundness of the temporary equipment and materials is determined by the structural characteristics after it was assembled. As a result of the feasibility analysis of the introduction of the safety certification of the assembled temporary equipment and materials through structural analysis, it is possible to effectively and rationally reflect the main geometrical influence factors, and to introduce the safety certification system that can test the procedures and procedures of the assembled temporary equipment and materials and based on it. It was found that there is a need. As a result of feasibility analysis on the necessity of introducing the safety certification system for assembled temporary equipment and materials through actual experiments, the existing single member performance evaluation has limitations in evaluating the structural performance of the assembled temporary equipment and materials. It was found that there is a need to introduce a safety certification system. As a result of gathering opinions on the feasibility of introducing the safety certification system for assembled temporary equipment and materials of manufacturers and users through the survey, it was found that the overall positive response result was high and the effectiveness was high.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.88-95
• /
• 2017

As the safety fields are expanding to a variety of industrial fields, safety technology has been developed by convergence between industrial safety fields such as mechanics, ergonomics, electronics, chemistry, construction, and information science. As the technology convergence is facilitating recently advanced safety technology, it is important to explore the trends of safety technology for understanding which industrial technologies have been integrated thus far. For studying the trends of technology, the patent is considered one of the useful sources that has provided the ample information of new technology. The patent has been also used to identify the patterns of technology convergence through various quantitative methods. In this respect, this study aims to identify the convergence patterns and fields of safety technology using association rule mining(ARM)-based patent co-classification(co-class) analysis. The patent co-class data is especially useful for constructing convergence network between technological fields. Through linkages between technological fields, the core and hub classes of convergence network are explored to provide insight into the fields of safety technology. As the representative method for analyzing patent co-class network, the ARM is used to find the likelihood of co-occurrence of patent classes and the ARM network is presented to visualize the convergence network of safety technology. As a result, we find three major convergence fields of safety technology: working safety, medical safety, and vehicle safety.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.132-139
• /
• 2021

The purpose of this study is to investigate the effect of organizational safety and health management activities on safety and health performance by using the results of safety activity level evaluation of public organizations. To this end, a research model was established by using three fields as independent variables among the four areas of the safety activity level evaluation index: safety and health system, safety and health activity plan, and safety and health activity level, and the safety and health activity performance field as a dependent variable. Correlation analysis and regression analysis between major variables were performed. As a result of the correlation analysis, the safety and health activity performance had a significant positive (+) correlation with all of the safety and health system, safety and health activity plan, and safety and health activity level. The safety and health system had a significant positive (+) correlation with the safety and health activity plan and safety and health activity level, and the safety and health activity plan had a significant positive (+) correlation with the safety and health activity level. And as a result of the regression analysis, it was found that the organization's safety and health system, safety and health activity plan, and safety and health activity level all had a significant positive (+) effect on safety and health activity performance.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.556-565
• /
• 2003

A quality assurance safety assessment database, called QUARK (QUality Assurance Program for Radioactive Waste Management in Korea), has been developed to manage both analysis information and parameter database for safety assessment of low- and intermediate-level radioactive waste (LILW) disposal facility in Korea. QUARK is such a tool that serves QA purposes for managing safety assessment information properly and securely. In QUARK, the information is organized and linked to maximize the integrity of information and traceability. QUARK provides guidance to conduct safety assessment analysis, from scenario generation to result analysis, and provides a window to inspect and trace previous safety assessment analysis and parameter values. QUARK also provides default database for safety assessment staff who construct input data files using SAGE(Safety Assessment Groundwater Evaluation), a safety assessment computer code.