• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.82-88
• /
• 2012

To analyze the thermal characteristics of wire connection part that is connected to a screw-clamping terminal block depending on screw torque, the normal screw torque defined in KS C 2625 and the abnormal screw torque that can occur due to loosened screws resulting from defective work or aged deterioration were used as experimental variables. After the same load was applied to normal and abnormal screw torques, the thermal characteristics of the wire connector were measured and compared with a thermal imaging camera. The findings from this study will be used to detect heating due to defective screw torque at terminal block connections during electric safety inspection in the future and minimize the hazard of electric fire.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.134-139
• /
• 2010

According to the "Yearbook of disaster response, fire safety and fire statistics (NEMA: National Emergency Management Agency)", approximately 34% of all fire is interior fire such as hotel, restaurant and residence and more than 53% of which is occurring in the kitchen. The evaluation of fire extinguishing system in the kitchen is performed in accordance with the "Korea Fire Equipment Inspection Standard (KOFEIS 0101-1)" which is using one environmental condition. However, only using one environmental condition is not enough to evaluate the performance of the automatic fire extinguisher in kitchen fire. So the study of fire detecting characteristic about various environmental condition needs. In this study, the numerical analysis is carried out about detecting time characteristic for various range's surrounding environment. As a result, it showed up to 100 s difference in the detection time depending on the position of the range. And detecting time also showed difference for on-off hood operation. From this results, it can be verify and improve the evaluation standard for the fire extinguishing system in kitchen fire.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.355-359
• /
• 2019

Schirmer test is one of the most used methods for the diagnosis of dry eye. We attempted to develop a tear level measurement tool to replace unreliable Schirmer test with inaccurate results. Absorbency tests for various absorbents were carried out. As a result, ${\alpha}$ cellulose pulp was selected as the absorbent. Prototypes were produced and evaluated twice. Finally a tear level measurement tool in the form of a strip of ${\alpha}$ cellulose pulp adhered to a polyurethane was prepared. Usability evaluation of prepared tear level measurement tool was performed. As a result, it was confirmed that it has a significant correlation with SM tube developed oversea recently. In addition, it was judged to be useful as an alternative to the Schirmer test in terms of measurement time and accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1042-1045
• /
• 2009

The Food is very important in our life, And the agricultural products are one of the most important food materials. For buying it, it's hard for the consumer to trust the agricultural products. That this reason, why they can't easily get the product information about agricultural productions. If you can get it, It is only mark of information about The country of production, They can not get reliable informations such as Producers, productions, residual pesticides, and soil conditions, etc. Accordingly, When consumers buy these agricultural productions, They want to provide reliable information. In this paper, using an RFID(Radio-Frequency IDentification) reader who reads RFID TAG attached to products. Then, Acquired Certification Number sent to a web server. To get the Production informations and Safety Inspection Information. The way that consumers can trust the Agricultural Products. These Traceability systems were implemented.

• Archives of Craniofacial Surgery
• /
• v.22 no.5
• /
• pp.239-246
• /
• 2021

Background: Bone grafts can provide an optimal environment for permanent tooth to erupt and enhance the stability of the alveolar maxilla. Although autologous bone is an optimal source for osteogenesis, its inevitable donor site morbidity has led to active research on bone substitutes. This study was designed to evaluate the safety and feasibility of using biphasic calcium phosphate (BCP; Osteon) as a bone substitute in dogs. Methods: Bilateral third and fourth premolars of four 15-week-old mongrel dogs were used. All teeth were extracted except the third premolar of the right mandible, which was used as a control. After extraction of the premolars, each dog was administered BCP (Osteon), demineralized bone matrix (DBM; DBX), and no graft in the hollow sockets of the right fourth premolar, left fourth premolar, and left third premolar, respectively. Radiographs were taken at 2-week intervals to check for tooth eruption. After 8 weeks, each dog was sacrificed, and tooth and bone biopsies were performed to check for the presence of tooth and bone substitute particle remnants. Results: Four weeks after the operation, permanent tooth eruptions had started at all the extraction sites in each dog. Eight weeks after the operation, all teeth had normally erupted, and histological examination revealed BCP particles at the right fourth premolar. Conclusion: In all four dogs, no delay in the eruption of the teeth or shape disfigurement of permanent teeth was observed on gross inspection and radiologic evaluation. On histological examination, most of the BCP and DBM were replaced by new bone. Bone substitutes can be used as graft materials in patients with alveolar clefts.

• Journal of fish pathology
• /
• v.34 no.2
• /
• pp.261-269
• /
• 2021

This study presents the evaluation of sample extraction and purification procedure for the determination of residues of febantel and its metabolites, fenbendazole, oxfendazole and oxfendazole sulfone in rockfish (Sebastes schlegeli) muscle using liquid chromatography-tandem mass spectrometry. Residues of febantel and its metabolites in rockfish muscle were analyzed using each different sample preparation method from Korean Food Standards Codex (KFSC), Food Safety and Inspection Service (FSIS, USA), and the modified FSIS method using QuEChERS kit (FSIS-Q), respectively. Each method was compared for mean recoveries and repeatabilities. Since FSIS-Q showed higher repeatabilities (coefficient of variation, CV of 2.4%~10.9%) than those of FSIS method (CV of 4.6%~17.5%), recoveries from FSIS-Q were compared with those from KFSC method. FSIS-Q showed significantly higher recoveries of 83.1%~110.1% (P < 0.05) than those from KFSC method of 64.7%~107.4%. In addition, FSIS-Q showed a good linearity over the range of 2.5~200 ㎍/kg, and excellent sensitivities with limit of detection of 0.46~0.71 ㎍/kg and limit of quantification of 1.08~2.15 ㎍/kg. Although all the sample preparation methods turned out to be able to meet CODEX guideline for all the compounds, FSIS method and FSIS-Q validated in this study could be applied to screening and quantification for residues of febantel and its metabolites in rockfish muscle with efficient preparation procedures.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.887-893
• /
• 2018

The purpose of this study is to compare the performance of X-ray generators installed in hospitals and universities and apply the quality control items of diagnostic X-ray generators to recognize the importance of periodic performance management. First, the reproducibility and linearity test results showed that the PAE of the reproducibility evaluation was high for the GX-650 devices that met the acceptance criteria in all the experimental conditions and lacked the periodic quality control. In the linearity evaluation, when the tube voltage was set to 100 kVp, It was measured to deviate from the error. In addition, it was found that the PAE in the low-accuracy evaluation results relative to an X-ray tube voltage and tube current of the device low occurrence frequency. The HVL experiment was included in all of the devices at the HVL by tube voltage. Therefore, it is necessary to recognize the importance of quality control of all devices rather than hospital and laboratory, and to manage the device performance by actively managing the device, and to establish a short - term quality control system like special medical devices.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.280-292
• /
• 2019

This study was carried out for the Centum Shinsegae Department Store, to grasp the indoor rest space and furniture design status, this study analyzes the characteristics of visitors' use behavior centered on furniture. The purpose of this study is to provide basic data for commercial rest space design by understanding the characteristics of resting space in commercial space and whether the furniture can support the behavior of visitors. The research method is to carry out on-site inspection, including the location of the rest space on each floor, the type and design characteristics of the furniture design, and the characteristics and patterns of the users on each were analyzed. The results of the study are as follows. As a result of analyzing the rest space and furniture, the furniture is brown, it has been provided with various designs such as fan-shaped, arched bench, sofa, chair type, and comfortable colors of lightness ranging from light gray to black, and appropriately supported the most common usage patterns.However, in the case of Shinsegae Department Store, it is necessary to consider the safety and convenience of the vulnerable groups.

• Geophysics and Geophysical Exploration
• /
• v.21 no.4
• /
• pp.244-254
• /
• 2018

The first geophysical technique applied to the agricultural sector in Korea was electrical resistivity sounding and conducted in purpose of groundwater exploitation in the 1970s. According to the diversity of agricultural activities since the 1990s, various geophysical methods including electrical resistivity, electromagnetic induction, and self-potential method were applied to several agricultural fields such as soil characterization with saline concentration in vast reclaimed area, delineation of seawater intrusion regions in costal aquifer, safety inspection of embankment dikes with leakage problem, detection of ground subsidence from overpumping and tracing of groundwater aquifer contamination by leachate from livestock mortality burial or waste burial site. This paper introduces representative geophysical techniques that have been utilized in various agricultural fields and suggests several ways to develop the geophysical methods required for the precision agriculture field in the near future based on the past achievements.

• Food Science of Animal Resources
• /
• v.41 no.4
• /
• pp.563-588
• /
• 2021

Increasing meat demand in terms of both quality and quantity in conjunction with feeding a growing population has resulted in regulatory agencies imposing stringent guidelines on meat quality and safety. Objective and accurate rapid non-destructive detection methods and evaluation techniques based on artificial intelligence have become the research hotspot in recent years and have been widely applied in the meat industry. Therefore, this review surveyed the key technologies of non-destructive detection for meat quality, mainly including ultrasonic technology, machine (computer) vision technology, near-infrared spectroscopy technology, hyperspectral technology, Raman spectra technology, and electronic nose/tongue. The technical characteristics and evaluation methods were compared and analyzed; the practical applications of non-destructive detection technologies in meat quality assessment were explored; and the current challenges and future research directions were discussed. The literature presented in this review clearly demonstrate that previous research on non-destructive technologies are of great significance to ensure consumers' urgent demand for high-quality meat by promoting automatic, real-time inspection and quality control in meat production. In the near future, with ever-growing application requirements and research developments, it is a trend to integrate such systems to provide effective solutions for various grain quality evaluation applications.