• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.383-391
• /
• 2010

The present study evaluated a preliminary control room (CR) design of radioactive waste facility using the $JACK^{(R)}$ human simulation system. Four digital humanoids ($5^{th}$, $50^{th}$, $95^{th}$, and $99^{th}$ percentiles) were used in the ergonomic evaluation. The first three were selected to represent 90% of the target population (Korean males aged 20 to 50 years) and the last to reflect the secular trend of stature for next 20 years in South Korea. The preliminary CR design was assessed by checking its compliance to ergonomic guidelines specified in NUREG-0700 and conducting an in-depth ergonomic analysis with a digital prototype of the CR design and the digital humanoids in terms of postural comfort, reachability, visibility, and clearance. For identified design problems, proper design changes and their validities were examined using JACK. A revised CR design suggested in the present study would contribute to effective and safe operations of the CR as well as operators' health in the workplace.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.426-438
• /
• 2020

This study aimed to identify the components of the nurses' exposure experiences and clarify the semantic structure of nurses by analyzing the participants' experiences of exposure to radiation. The participants in this study were nine nurses who worked for at least six months in the operating room of a City General Hospital. The data were collected using in-depth interviews and analyzed using the phenomenological method by Giorgi's (2004). As a result, six components were derived: "worrying about the disease by repeated radiation exposures", "exhausting physically and mentally," "trying to protect themselves against radiation exposure", "feeling of internal confusion and conflict", "demanding improvement of work environment", and "accepting and adapting to reality". In conclusion, nurses participating in radiation exposure surgery are concerned about the possibility of disease, experience physical and mental fatigue, and then consider changing their occupation. On the other hand, they try to accept and adapt to reality by considering the possibility of a job change or trying to protect themselves from the harsh environment. To develop a radiologically safe environment, systematic and effective resolutions must be secured at the organizational level.

• Journal of the FoodService Safety
• /
• v.3 no.1
• /
• pp.8-18
• /
• 2022

Dry-aging is one of the traditional aging processes, especially for beef. This aging process is being popular, because it produces unique brown/roasted flavor and texture that consumers prefer. However, as it is exposed to outside without packaging food safety concerns have been raised. The objective of this study was to investigate the presence of total aerobic bacteria (TAB) and pathogenic bacteria in manufacturing environment and suggest the safety management plan for the production of dry-aged meat. Surface samples from 66 environmental and 6 beef carcass samples were collected. According to the monitoring results, the contamination levels of TAB were in the order of shelves (5.4±1.1 Log CFU/cm²), cotton gloves (2.9±0.2 Log CFU/cm²), and door knobs (2.8±0.4 Log CFU/cm²) in the dry-aging room. In the door knobs, the level of mold was higher than that of yeast. These results indicate that the mold spores may be cross-contaminated with environmental factors inside the aging room. The risk factors that may occur during the manufacturing process were presented and possibility of risk was determined. From the aspect of microbiology, aging and trimming steps were determined as the critical control points. The temperature of the aging room should be maintained below 10℃ and the humidity below 75-85%. Based on the monitoring and the risk assessment of the dry-aging process, we prepared the safety management plan for the production of dry-aged meat, and it should be useful in improving the food safety of dry-aged meat.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.4
• /
• pp.29-35
• /
• 2023

Purpose: The 2015 Middle East Respiratory Syndrome (MERS) outbreak and the recent COVID-19 pandemic have highlighted the lack of negative pressure isolation rooms and the fragility of the healthcare system. The need for healthcare facility transformation for respiratory infectious diseases has become more prominent due to COVID-19, and the purpose of this study is to provide a foundation for the rapid, economical, and safe construction of negative pressure isolation wards. Methods: This study analyzes the current status of hospitals that have been converted to negative pressure isolation rooms, and provides architectural plans and examples to provide a reference for bedroom change. Research data of this study have been obtained by analyzing the drawings of negative pressure isolation wards of nationally designated inpatient treatment beds and urgent isolation beds. In addition, the relevant literature of urgent isolation beds has been analyzed to derive bedroom change type. Result: In this study, a total of 21 isolation bed conversion methods have been presented. Implications: In order to change efficiently from a general ward to an isolation ward, it is necessary to consider the actual hospital's infectious disease transmission patterns and facility conditions.

• Food Science and Preservation
• /
• v.12 no.4
• /
• pp.310-316
• /
• 2005

This study was carried out to investigate the quality characteristics by packaging materials and storage temperature to predict safe storage period for milled rice. Mechanical taste value and whiteness of milled rices stored at room temperature were severely decreased than those of the stored at low temperature, but fat acidity and b value of those at room temperature was rapidly increased than those of stored at low temperature. Milled rice packed in LDPE film bag were smelled stale flavor after 4 months storage at room temperature, Hojinbyeo was not produced flour in the rice grain surface but Dongjinbyeo was showed production of flour. pH of milled rice of Dongjinbyeo and Hojinbyeo packed in LDPE film bag were the lowest showing 5.3 and 5.6, respectively after 6 months at mom temperature. Safe storage period of Dongjinbyeo and Hojinbyeo packed in craft paper bag were 1 month at room temperature, those of packed in LDPE film bag were 2 months. At low temperature safe storage period of Dongjinbyeo and Hojinbyeo packed in craft paper bag were 2 months, those of packed in LDPE film bag were 5 and 4 months, respectively.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.145-150
• /
• 1996

The purpose of this study was to evaluate and compare the effectiveness of ilioinguinal-hypogastric nerve blocks(IHNB) and caudal block in producing post-orchiopexy and post-heniorrhaphy analgesia in children. Forty consenting healthy children, ages 3~10yr, were randomly assigned to receive caudal bupitvacaine (0.125%, 0.5ml/kg), or IHNB bupivacaine (0.25%, 0.3 ml/kg). Blocks were performed following the induction of general anesthesia, be fore the operation. Pre-anesthetic medication in form of atropine 0.01 mg/kg, droperidol 0.05 mg/kg were given intramuscularly one hour before induction to 40 children. Children were induced with thiopental sodium 5 mg/kg and succinylcholine 1 mg/kg intravenously. Anesthesia was maintained with oxygen-nitrous oxide ($FiO_2$ 0.3) and ethrane. When the patients stabilized after induction. IHNB was done in the supine position and caudal block was done in the lateral position. The local anaesthetic was injected after negative aspiration. Postoperative pain was assessed with face pain rating scale (RPRS) at rest on discharge of recovery room, and 5 hours after discharge of recovery room, and the "red and white" visual analogue scale (VAS) at rest and mobilization from supine to sitting position on discharge of recovery room, and 5 hours after discharge of recovery room. Post-operative recovery was quiet and comfortable, without side effect. Relief of ain was complete in both IHNB group and caudal group. Surgeons, parents and recovery room personnel were satisfied. There were no surgical or anesthetic complications. In our study, the postpoerative pain scores were similar in both IHNB group and caudal group. IN conclusion, we found that both IHNB and caudal blocks before the start of surgery for orchiopexy & herniorrhaphy are safe and effective in controlling the postoperative pain of children.

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.287-292
• /
• 2008

In this study, the evacuation training were performed in a high school building in Cheong-Ju and compared with the simulation program (Simulex). Also numerical analysis of room fire in school building was conducted by fire model (FDS, CFAST) and evaluated the available safe egress time for the safety assessment. As a result, the 8% of total egress persons were failed to escape at evacuation training and 40% of total egress persons were failed to escape at Simutex simulation. Simutex program was not reflected the real escape conditions, such as evacuation route, refuge place, etc.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1505-1512
• /
• 2017

Because accelerator-based boron neutron capture therapy (BNCT) systems are planned for use in hospitals, entry into the medical room should be controlled as hospitals are generally assumed to be public and safe places. In this paper, computational investigation of the medical staff effective dose during BNCT has been performed in different situations using Monte Carlo N-Particle (MCNP4C) code and two voxel based male phantoms. The results show that the medical staff effective dose is highly dependent on the position of the medical staff. The results also show that the maximum medical staff effective dose in an emergency situation in the presence of a patient is ${\sim}25.5{\mu}Sv/s$.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2000

In this paper based on geometric optics and geometric modeling aspheric surface of the side mirror mold with dead angle reduced have been designed and machined in a CNC machining center, Surface roughness of the mold was evaluat-ed by usin the surface shaping system. Surface generating simulation of a ball endmill process is investigated. Through the simulation based on the surface-shaping system 3-D engineered surfaces and properties of engineered surfaces are obtained, Computer simulation provides the effective working conditions through the prediction of geometric properties of engineered surfaces. The rear view mirror and room mirror play important role on the safe driving condition as a observation of environment but the rear view mirror can not provide complete information of driving environments due to the existence of the dead angle. The analysis on the shape of formed mirror shows that the proposed me？ improves range of a driver's sight.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.123-131
• /
• 2006

This paper reports the apparatus and method for the safe treatment of pentachlorophenol(PCP)-treated ammunition box by solvent extraction. Experimental variables were chosen as the composition of solvents, types of substance(chips and sawdust), temperatures and sonication to obtain maximum PCP removal from wood samples of the dismantled ammunition box. Up to 99% of PCP in the wood chip was extracted within 2 hours at room temperature when using methanol as the solvent. The extraction volume ratio of methanol per dried sample was about 10. Type of samples, extraction temperature and sonification showed little effects on PCP extraction. Based on this study, a resource recycling system for the treatment of ammunition boxes was recommended.