• Archives of Plastic Surgery
• /
• v.41 no.2
• /
• pp.163-170
• /
• 2014

Background The septal cartilage is the most useful donor site for autologous cartilage graft material in rhinoplasty. For successful nasal surgery, it is necessary to understand the developmental process of the nasal septum and to predict the amount of harvestable septal cartilage before surgery. Methods One hundred twenty-three Korean patients who underwent three-dimensional (3D) facial bone computed tomography (CT) were selected for evaluation of the midsagittal view of the nasal septum. Multiple parameters such as the area of each component of the nasal septum and the amount of harvestable septal cartilage were measured using Digimizer software. Results The area of the total nasal septum showed rapid growth until the teenage years, but thereafter no significant change throughout the lifetime. However, the development of the septal cartilage showed a gradual decline due to ossification changes with aging after puberty in spite of a lack of change in the total septal area. The area of harvestable septal cartilage in young adults was $549.84{\pm}151.26mm^2$ and decreased thereafter with age. Conclusions A 3D facial bone CT scan can provide valuable information on the septal cartilage graft before rhinoplasty. Considering the developmental process of the septal cartilage identified in this study, septal surgery should not be performed until puberty due to the risk of nasal growth impairment. Furthermore, in elderly patients who show a decreased cartilage area due to ossification changes, septal cartilage harvesting should be performed carefully due to the risk of saddle nose deformity.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.927-934
• /
• 2014

Today Hanbok, the symbol of our nation's culture, has been preserved as cultural heritage despite natural and social environmental changes over years. This study is analyzing Hanbok which were taken in the National Skills Competition from 2000 to 2013; it presents our traditional stitching methods and clarifies the pride the Hanbok artisans have as inheriting the traditional heritage. Therefore this paper contributes to continuous and proper development of the culture of Hanbok and being loved by many people. The assignments about Hanbok featured in the National Skills Competition were categorized by national and local competition, time required to produce assignments, required amount of fabric, type of stitching, unlined and lined clothes depending on the type of assignment; according to the classification, methods for sewing were analyzed in detail. First, the national tournament presented 12 kinds of sewing techniques; especially hand-sewn stitching method appeared in common. Second, the unlined and lined clothes depending on the type of assignments had applied different sewing methods; double-stitching, flat fell seam, french seam, roll over sewing, blind stitch, right angle blind stitch, decorative saddle stitching, darning, etc. were used. Sewing methods in the 21st century has not changed over the years; the shape of clothes was changed upon trends. Sewing became easier than before by the invention of sewing machine, we should carry on our traditional sewing techniques. Through this analysis on sewing methods of the National Skills Competition, I hope to support competition participants for studying Hanbok and indicate proper sewing techniques.

• Korean journal of food and cookery science
• /
• v.27 no.6
• /
• pp.793-801
• /
• 2011

We examined the quality characteristics of obtaining the optimal curing conditions for black garlic extract (BGE) added mackerel by using response surface methodology (RSM). The condition of RSM was included in 13 experimental points using two dependent variables: concentration of BGE (2.6~12.5 brix, X1) and curing time of BGE (17.58~102.42 min, X2). An assessment was conducted with four replicates on three independent variables: volatile basic amine (VBN, Y1), thiobarbituric acid (TBA, Y2), and shear force (Y3). The minimum content of VBN was 1.625 mg% at 3.17 brix, for 80.5 min. This was obtained when the BGE concentration was lower and the curing time was longer. The content of the TBA was 3.13~12.24 MA mg/kg at experiment range and the stationary point was at saddle point. Therefore, by using ridge analysis, the minimum point of TBA was 2.414 MA mg/kg at 3.5 brix for 84.4 min. The truth coefficient of the BGE concentration and curing time were 2.9 brix and 75.1 min, respectively, with a shear force ($120.764cm/kg^2$) shown at maximum point. The optimum Hunter color range was estimated from the lowest TBA value. The optimum range of the L color was 39.16~40.26, a and b color were 4.40~4.88 and 12.35~13.20, respectively.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.1
• /
• pp.65-70
• /
• 2018

The objective of this study was to describe a radiofrequency (RF) coil design for in vivo sodium magnetic resonance imaging (MRI) for use in small animals. Accumulating evidence has indicated the importance and potential of sodium imaging with improved magnet strength (> 7T), faster gradient, better hardware, multi-nucleus imaging methods, and optimal coil design for patient and animal studies. Thus, we developed a saddle-shaped sodium volume coil with a diameter/length of 30/30 mm. To evaluate the efficiency of this coil, bench-level measurement was performed. Unloaded Q value, loaded Q value, and ratio of these two values were estimated to be 352.8, 211.18, and 1.67, respectively. Thereafter, in vivo acquisition of sodium images was performed using normal mice (12 weeks old; n = 5) with a two-dimensional gradient echo sequence and minimized echo time to increase spatial resolution of images. Sodium signal-to-noise ratio in mouse kidneys (renal cortex, medulla, and pelvis) was measured. We successfully acquired sodium MR images of the mouse kidney with high spatial resolution (approximately 0.625 mm) through a combination of sodium-proton coils.

• Archives of Craniofacial Surgery
• /
• v.11 no.2
• /
• pp.77-84
• /
• 2010

Purpose: The nasal bones are the most common fracture sites of the facial bones, and a careful reduction may still result in secondary deformities, such as saddle nose, deviated nose, hump nose etc, requiring secondary cosmetic rhinoplasty. Therefore, this study examined the clinical characteristics of nasal bone fractures to propose guidelines for patient selection and surgical procedures to achieve more satisfactory results and to prevent secondary deformities with simultaneous augmentation rhinoplasty and bony reduction. Methods: The study was based on 26 out of 149 nasal bone fracture patients who underwent simultaneous augmentation rhinoplasty with bony reduction between May 2008 and April 2009. Retrospective analysis was performed according to the clinical data, surgical techniques and postoperative results. Results: Of the 26 patients, there were 15 males and 11 females. The incidence according to the Stranc's classification revealed that 62% of patients were injured by a frontal impact and 38% by a lateral impact. Frontal impact plane I (50%) was the most frequent type. At the follow up, 18 (81.2%) out of 22 patients were satisfied with their postoperative outcome, and the remaining 4 patients were fair. No one was dissatisfied. However, 5 cases in 3 patients (23%) had some complications; minimal implant deviation in 2 cases, minor irregularity on the nasal dorsum in 2 cases and palpable implant movement under palpation in 1 case. None of these cases required surgical correction. Conclusion: With the proper guidance, simultaneous augmentation rhinoplasty with bony reduction can prevent secondary deformities and satisfy the cosmetic outcomes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2002

Biomass distribution of zooplankton showed its lowest level in June in the Cheju Strait, and the highest one was noticed in November when the secondary productivity is considered high. The highest biomass of zooplankton appeared in the sea areas of Sta. 14 and 11 respectively with relation to oceanographic conditions and wet weight of biomass. The positions were the center part of the Cheju Strait, while the sea area of the South Sea of Korea and the northern coast of Cheju Island showed relatively low biomass distribution. The characteristic of the sea area where biomass was densely distributed was it was in patch shape. Meanwhile, biomass distribution was higher in the northern sea area of Cheju Island than In the coastal sea of the South Sea of Korea. It shows formation of hairtail fishing grounds is closely related to biomass distribution in the Cheju Strait. In addition, high biomass is displayed in the center part of the saddle shaped ocean, a boundary of the heterogeneous water mass as a feature of fall oceanographic condition. Good fishing grounds of a hairtail In the Cheju Strait were formed outside of the sea area that showed patch-shaped high biomass distribution.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.2
• /
• pp.72-77
• /
• 2008

Objective : The objective of this study was to evaluate the characteristics and surgical outcome of the conus medullaris tumors. Methods : We retrospectively reviewed 26 patients who underwent surgery for conus medullaris tumor from August 1986 to July 2007. We analyzed clinical manifestation, preoperative MRI findings, extent of surgical resection, histopathologic type, adjuvant therapy, and outcomes. Results : There were ependymoma (13), hemangioblastoma (3), lipoma (3), astrocytoma (3), primitive neuroectodermal tumor (PNET) (2), mature teratoma (1), and capillary hemangioma (1) on histopathologic type. Leg pain was the most common symptom and was seen in 80.8% of patients. Pain or sensory change in the saddle area was seen in 50% of patients and 2 patients had severe pain in the perineum and genitalia. Gross total or complete tumor resection was obtained in 80.8% of patients. On surgical outcome. modified JOA score worsened in 26.9% of patients, improved in 34.6%, and remained stable in 38.5%. The mean VAS score was improved from 5.4 to 1.8 among 21 patients who had lower back pain and leg pain. Conclusion : The surgical outcome of conus medullaris tumor mainly depends on preoperative neurological condition and pathological type. The surgical treatment of conus medullaris tumor needs understanding the anatomical and functional characteristics of conus meudllaris tumor for better outcome.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1349-1353
• /
• 2008

Size-segregated mass and ion concentrations of atmospheric aerosols in Cheonan City were measured using a high volume air sampler equipped with a 5-stage cascade impactor and a ion chromatography between March 2006 and April 2007. The mean values of 24-hr average concentrations of TSP, PM10, PM2.5, and PM1 were 61.7, 55.2, 43.7, $33.2{\mu}g/m^3$, respectively. Mass size distributions of atmospheric aerosols were bimodal distributions with a saddle point in $1.5\;{\sim}\;3.0{\mu}m$ range in diameter separating coarse and fine particle modes. Fine particles, PM2.5 were 70.8% of the total mass of aerosols. Major ion components in aerosols were ${NH_{4}}^+$, $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$ for cations, and ${SO_{4}}^{2-}$, ${NO_{3}}^-$, $Cl^-$ for anions. ion components occupied 37.4% of coarse particles and 46.2% of fine particles in mass.

• Journal of Veterinary Clinics
• /
• v.31 no.4
• /
• pp.298-302
• /
• 2014

An 8-year-old castrated male domestic shorthair cat (Case 1) and 3-year-old castrated male Siamese cat (Case 2) was presented with acute paresis of the hindlimbs, constant open-mouth breathing, and hemoptysis. Heart murmur (Case 1) and gallop sound (Case 2) was ausculated on the left heart base. Radiographs revealed alveolar infiltration of the caudodorsal lung lobes with aerophagea in Case 1 and prominent cardiomegaly in Case 2. Marked concentric hypertrophy of the ventricular septum and free wall, and left atrial enlargement was detected through echocardiography in both cats. Based on the examinations including echocardiography, those cats were diagnosed as hypertropic cardiomyopathy. Abdominal ultrasound revealed echogenic material in the aortic trifurcation region, aortic thromboembolism (ATE). Although prognosis of those animals was guarded, interventional therapeutic approach through direct endovascular thrombolytic therapy was attempted. ATE was visualized through angiography; however dissolving the embolus using interventional thrombolytic approach was not successful due to the extensive thrombus.