• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.248-254
• /
• 2013

Purpose: This study was performed in order to obtain basic data for policy development and R&D to sharpen competitiveness in domestic agricultural machinery industry by analyzing the recent status of demand and supply for tractor, rice transplanter(riding type), and combine. Methods: Basic data from 199,275 units of tractor, rice transplanter (riding type), and combine was offered by the National Agricultural Cooperative Federation and Korea Agricultural Machinery Industry Cooperative. Those agricultural machines were supplied by the government's loan support from 2003 to 2012. Results: Recent supply of tractor is only 13,000 units or so per annum, thereby being stagnated. Rice transplanter and combine in 2012 corresponded to 3,810 units and 2,490 units, respectively. The domestic market share of the imported agricultural machinery accounted for 60.0% in tractor, 99.5% in saddle rice transplanter, and 80.9% in combine, thereby having been sharply increased 33.1%p, 42.0%p and 53.6%p compared to the ones in 2003. Life spans of tractor, combine and saddle rice transplanter are 3.7, 3.7 and 4.2 years, respectively. Among the discontinued models, the one less than 300 units supplied was occupied up to 70~85%. Conclusions: The domestic demand and the export expansion are needed through developing a model of agricultural machinery of having competitiveness to domestically activate agricultural machinery industry.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.225.1-225
• /
• 2003

잣을 이용한 쌀가루즉석죽 제조조건의 최적화와 제조조건에 따른 관능적 특성을 4차원 반응표면분석에 의하여 모니터링 하였다. 죽의 제조에 이용되는 잣은 가루같이 으깬 것을 첨가하는 것이 바람직하였다. 관능적 특성에 의한 잣죽의 점성에 대한 최적조건은 주입액의 양과 잣의 첨가비율이 각각 쌀가루 무게의 15.52배, 16%, 가열조리시간 7.79 분이었으며 이때 $R^2$는 0.9518, 관능평점은 7.45, 임계점은 maximum point였다. 색상에 대한 최적조건은 19.09배, 45%, 2.16분($R^2$=0.7917)이었고 관능평점은 5.44, saddle point였으며, 맛에 대한 최적조건은 12.90배, 22%, 11.40분($R^2$=0.9361), 관능평점은 7.11, maximum point였고, 향에 대한 최적조건은 15.06배, 20%, 4.9분($R^2$=0.8372), 관능평점은 6.16, saddle point였다. 관능적 특성을 모두 만족시켜주는 최적조건은 주입액의 양과 잣의 첨가비율이 각각 쌀가루무게의 16.86배와 15%, 가열조리시간 5.48분이었고 이때 $R^2$는 0.9738, 관능적 평점은 7.69, 임계점은 maximum point였다. 관능적 특성 중 점성은 맛과 전반적기호도에 큰 영향을 주었으며 상관계수는 각각 0.8173($R^2$=0.0001), 0.7878($R^2$=0.0002)이었고 맛은 향과 전반적인 기호도와 밀접한 관계가 있으며 상관계수는 각각 0.5196($R^2$=0.0325)과 0.7004($R^2$=0.0017)이었다.

• Journal of Acupuncture Research
• /
• v.31 no.3
• /
• pp.91-102
• /
• 2014

Objectives : This study was done to determine the effect of Korean medical treatment to patient diagnosed as cauda equina syndrome(CES) suffering from both lower limb dysesthesia, saddle dysesthesia, buttock dysesthesia, dysuria, dyschezia and gait disturbance. Methods : A patient with CES was treated with acupuncture, sweet bee venom pharmacopuncture, herbal medicine from February 2 to April 9 at Department of Acupuncture & Moxibustion, Daejeon Korean Hospital of Daejeon University. Patient received acupuncture treatment($CV_1$, $CV_3$, $CV_4$, $CV_6$, $ST_{36}$, $BL_{31}$, $BL_{32}$, $BL_{33}$, $BL_{34}$) 12 times a week, bee-venom pharmacopuncture($BL_{23}$, $BL_{28}$) was conducted twice a week, herbal medicine(Samilsingihwan decoction) was applied to patient thrice a day for nine weeks. The following symptoms were observed saddle, and lower limb dysesthesia, dysuria, dyschezia and gait disturbance. Results : After treatment, dysesthesia, dysuria, dyschezia and gaiting developed good outcome. But anal reflex remained still. Conclusions : Acupuncture, bee-venom pharmacopuncture, herbal medicine combined treatment might be effective to patients with CES.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.519-539
• /
• 1990

It is the aim of this study to observe the distribution of various facial types in class III malocclusion and to characterize the craniofacial features of the very facial types. Cephalometric headptates of a hundred and ten persons showing bilateral class III malocclusion whose mean age was 12.51 years and sixty nine persons of normal occlusion whose mean age was 12.23 years were measured and statistically analyzed. The following summary and conclusions were drawn. 1. Affording the bases for SNA and SNB, $35.45\%$ of sample showed normally positioned maxilla and protruded mandible, $30.00\%$ for retruded maxilla and normally positioned mandible, $15.45\%$ for retruded maxilla and protruded mandible, $10.90\%$ for both maxilla and mandible within normal range and $8.20\%$ for miscellaneous types were arranged in class III malocclusion. 2. $52.72\%$ of sample showed neutrodiveigent, $35.45\%$ for hyperdivergent and $11.81\%$ manifested hypodivergent mandible in class III malocclusion. 3. Providing the bases for facial and mandibular planes, $33.63\%$ of sample showed prognathic and neutrodivergent, $20.90\%$ for mesognathic and hyperdivergent, $17.27\%$ for prognathic and hyperdivergent and $15.45\%$ for mesognathic and neutrodivergent were arranged in class III malocclusion. 4. The class III malocclusion brought out shorter cranial base, smaller saddle angle, and larger articular and genial angle. It showed retropositioned maxilla and forward positioned mandible in spite of no significant differences in linear measurements of mandible. Anterior lower facial height was significantly larger in class III malocclusion, while posterior total facial and anterior total facial heights exhibited no significant differences. 5. It is suggested class III malocclusion was attributed to shorter cranial base, smaller saddle angle, maxillary deficiency and/or retrusion, mandibular excess and/or protrusion, excessive vertical growth of the anterior lower face, and their complex as well.

• Conservation Science in Museum
• /
• v.18
• /
• pp.1-18
• /
• 2017

This study investigated the techniques applied in the manufacturing of the horse trappings with jewel beetle adornment excavated from Geumgwanchong Tomb, with a focus on the use of jewel beetle wings. It is revealed that the wings of jewel beetles were stripped of their upper skeletal parts and applied as ornamentation under the gilt-bronze openwork plate, and no additional process was applied to improve adhesion. The horse trappings from Geumgwanchong Tomb include saddles, stirrups, horse strap pendants, and bamboo mudguards, but most of the components except the stirrups are failing or lost, making it difficult to identify the manufacturing techniques. The techniques used to affix the jewel beetle wings vary depending on the support materials. Small chisels were used to fix the jewel beetle wings to the stirrups and saddle made of wooden supports. In the case of the bamboo mudguards and metal artifacts, the wings were fixed with lacquer and then combined with the gilt-bronze openwork plate using pressure.

• Structural Engineering and Mechanics
• /
• v.71 no.6
• /
• pp.603-625
• /
• 2019

Main cable configurations under final dead load and in the unloaded state and critical construction parameters (e.g. unstrained cable length, unstrained hanger lengths, and pre-offsets for tower saddles and splay saddles) are the core considerations in the design and construction control of a suspension bridge. For the purpose of accurate calculations, it is necessary to take into account the effects of cable strands over the anchor spans, arc-shaped saddle top, and tower top pre-uplift. In this paper, a method for calculating the cable configuration under final dead load over a main span, two side spans, and two anchor spans, coordinates of tangent points, and unstrained cable length are firstly developed using conditions for mechanical equilibrium and geometric relationships. Hanger tensile forces and unstrained hanger lengths are calculated by iteratively solving the equations governing hanger tensile forces and the cable configuration, which gives careful consideration to the effect of hanger weight. Next, equations for calculating the cable configuration in the unloaded state and pre-offsets of saddles are derived from the cable configuration under final dead load and the conditions for unstrained cable length to be conserved. The equations for the main span, two side spans and two anchor spans are then solved simultaneously. In the proposed methods, coupled nonlinear equations are solved by turning them into an unconstrained optimization problem, making the procedure simplified. The feasibility and validity of the proposed methods are demonstrated through a numerical example.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.92-98
• /
• 2010

In this study, various active functional components in Chinese Quince were extracted by solvent extraction method. A central composit design for optimization was applied to investigate the effects of independent variables such as solvent to sample ratio ($X_{1}$), extraction temperature ($X_{2}$), and extraction time ($X_{3}$) on the soluble solid contents ($Y_{1}$), total phenols ($Y_{2}$), electron donating ability ($Y_{3}$), browning color ($Y_{4}$) and reducing sugar contents ($Y_{5}$). It was found that extraction temperature and extraction time were the main effective factors in this extraction process. The maximum soluble solid contents of 35.77% was obtained at 26.38 mL/g ($X_{1}$), 72.82$^{\circ}C$ ($X_{2}$) and 74.86 min ($X_{3}$) in saddle point. Total phenols were rarely affected by solvent ratio and extraction time, but it was affected by extraction temperature. The maximum total phenols of 20.70% was obtained at 22.61 mL/g ($X_{1}$), 84.49$^{\circ}C$ ($X_{2}$), 77.25 min ($X_{3}$) in saddle point. The electron donating ability was affected by extraction time. The maximum electron donating ability of 94.12% was obtained at 10.65 mL/g ($X_{1}$), 67.78$^{\circ}C$ ($X_{2}$), 96.75 min ($X_{3}$) in saddle point. The maximum browning color of 0.32% was obtained at 23.77 mL/g ($X_{1}$), 87.27$^{\circ}C$ ($X_{2}$), 96.68 min ($X_{3}$) in saddle point. The maximum value of reducing sugar content of 10.55% was obtained at 26.83 mL/g ($X_{1}$), 82.167$^{\circ}C$ ($X_{2}$), 81.94 min ($X_{3}$). Reducing sugar content was affected by extraction time.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2009

This study was investigated on optimal conditions of the functional activities of ${\beta}$-glucan which was extracted from rice bran (RB) and rice germ (RG) using response surface methodology. The extraction temperature was varied in the $80-100^{\circ}C$, the extraction time between 2-10 min, and the ethanol concentration was in the interval of 30-70%. A central composite design was applied to investigate the effects of independent variables of extraction temperature ($X_1$), extraction time ($X_2$) and ethanol concentration ($X_3$) on dependent variables such as electron donating ability of RB ($Y_1$), electron donating ability of RG ($Y_2$), total phenolics of RB ($Y_3$), total phenolics of RG ($Y_4$), ${\beta}$-glucan contents of RB ($Y_5$) and ${\beta}$-glucan contents of RG ($Y_6$). As a result, the highest $Y_1$ level was 84.02% at $92.60^{\circ}C$, 2.75 min and 60.41% in saddle point. This value was affected by extraction temperature (P<0.05). The value of $Y_2$ was found to be the highest at $87.52^{\circ}C$, 2.23 min and 54.40% in saddle point. The highest $Y_3$ level was $98.56^{\circ}C$, 6.69 min and 40.26% in saddle point, and this extraction was greatly influenced by extraction temperature (P<0.01) and ethanol concentration (P<0.05). The value of $Y_4$ was found to be highest at $95.73^{\circ}C$, 9.19 min and 53.67% in minimum point. The value of $Y_5$ was found to be the highest at $96.23^{\circ}C$, 7.70 min and 63.69% in saddle point. The value of $Y_6$ was found to be highest at $87.82^{\circ}C$, 2.10 min and 50.03% in minimum point, and this extraction was greatly influenced by extraction time (P<0.01).

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.761-763
• /
• 2002

실리콘 웨이퍼 성장에 유리한 수평자장형 마그네트에는 saddle type, cylinder type 등 여러 가지 종류가 있다. 이러한 종류의 마그네트를 사양을 바꿔가며 균일도, 중심자장, 권선에 사용되는 선재량 등을 비교하였다. 해석 tool은 'opera-3d'을 사용하였으며, 기본적인 사양은 실제 System에서 요구되는 수치를 토대로 결정하였다. 본 연구를 토대로 12inch 단결정 성장을 위한 마그네트 종류와 사양 그리고 Cryostat의 기본적인 크기와 두께를 결정하게 되었다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.374-377
• /
• 2002

Magnetic field is necessary to control the convection of melted silicon and to improve the quality of the wafer in the 12inch silicon wafer growing process. Nowadays, superconducting magnet is used in this process. We fabricated and tested a saddle shaped superconducting magnet for 8inch silicon wafer growing system. And the protection circuits for HTS current lead and superconducting coil are designed and manufactured. In this paper, their manufacturing process and test results are introduced.