• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.35-40
• /
• 2008

Generally flight vehicles have many cavities such as wheel wells, bomb bays and windows on their external surfaces and the flow around these cavities makes separation, vortex, shock and expansion waves, reattachment and other complex flow phenomenon. The flow around the cavity makes abnormal and three-dimensional noise and vibration even thought the aspect ratio (L/D) is small. The cavity giving large effects to the flow might make large noise, cause structural damage or breakage, harm the aerodynamic performance and stability, or damage the sensitive devices. In this study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's $\kappa-\omega$ turbulence model. The MPI(Message Passing Interface) parallelized code was used for calculations by PC-cluster. The cavity has the aspect ratios of 2.5, 3.5 and 4.5 with the W/D ratio of 2 for three-dimensional cavities. The Sound Pressure Level (SPL) analysis was done with FFT to check the dominant frequency of the cavity flow. The dominant frequencies were analyzed and compared with the results of Rossiter's formula and Ahuja& Mendoza's experimental datum.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.49-53
• /
• 2004

LabVIEW is mostly preferred to use in experiment, measurement and control as one of the useful thing in America and Europe. So, We tried performance experiment of a single-stage closed-type centrifugal pump by using the LabVIEW. The pump rpm and the shaft torque are measured by rpm sensor and torque sensor The test pump's maximum rpm, head, kW are 1,750, 13m, and 1.5kW, respectively The casing is made up with transparency acrylic for confirmation the flow patterns. We installed experimental equipment for air water two phase flow. This paper tries to analyze the single-phase flow characteristics through this air water two phase flow experimental apparatus. The performance results of a single-stage closed-type centrifugal pump satisfied reappearance and coincide well with head and coefficients according to the change of rpm.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.267-283
• /
• 2015

The main objective of this study is to investigate experimentally the two-phase flow characteristics in terms of the direct contact condensation of a steam-water stratified flow in a horizontal rectangular channel. Experiments were performed for both air-water and steam-water flows with a cocurrent flow configuration. This work presents the local temperature and velocity distributions in a water layer as well as the interfacial characteristics of both condensing and noncondensing fluid flows. The gas superficial velocity varied from 1.2 m/s to 2.0 m/s for air and from 1.2 m/s to 2.8 m/s for steam under a fixed inlet water superficial velocity of 0.025 m/s. Some advanced measurement methods have been applied to measure the local characteristics of the water layer thickness, temperature, and velocity fields in a horizontal stratified flow. The instantaneous velocity and temperature fields inside the water layer were measured using laser-induced fluorescence and particle image velocimetry, respectively. In addition, the water layer thickness was measured through an ultrasonic method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.157-164
• /
• 2008

The temperature-entropy diagram of water or vapor displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. On general T-s chart of water, there are temperature, pressure, quality, specific volume, specific enthalpy, specific entropy. However, various state and process values besides above properties can be plotted on T-s diagram. In this study, we developed the software drawing twenty six kinds of properties, that is temperature, pressure, quality, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, coefficient of viscosity, kinematic coefficient of viscosity, thermal conductivity, prandtl number, ion product, static dielectric constant, isentropic exponent, velocity of sound, joule-thomson coefficient, pressure coefficient, volumetric coefficient of expansion, isentropic compressibility, and isothermal compressibility. Also, this software can analyze and print the system values of mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, and reversible work. Additionally, this software support the functions such as MS-Power Point.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1188-1198
• /
• 2006

This study recognizes that individual's experience is important in change over Internet fashion consumers to Internet users, and find out fashion consumer's flow experience in Internet shopping of the fashion merchandise. Also, the purpose of this study is to analyze whether flow experience and perceived utilitarian value have an effect on Internet purchase intention of the fashion merchandise. To fulfill this objectives, a survey was conducted out from June 20 to July 30 in 2005, and an subject of study was married women aged from 20s to 30s in purchase experience of the fashion merchandise to Internet shopping malls. Data collected over the Internet, and analyzed the 306 subjects. The statistical analysis methods was frequency analysis, reliability analysis, factor analysis, multiple regression analysis. 3 hypotheses were accepted, the result of this study were as follows: First, a married women aged from 20s to 30s in purchase experience of the fashion merchandise to Internet shopping malls were skilled Internet enough to regarding Internet shopping as an easy thing, and was challenged in Internet activity. Their Internet skills, challenges and interaction had an effect on flow experience and perceived utilitarian value. Therefore, the more Internet skills, challenges. and interaction were higher, the more flow and utilitarian value about Internet shopping was higher. Second, a married women aged from 20s to 30s were high-purchased group of the fashion merchandise to Internet shopping malls, and had a repurchase intention in Internet shopping mall within the purchase experience of the fashion merchandise. Their flow experience and perceived utilitarian value had an effect on Internet purchase intention of the fashion merchandise. Therefore, the more flow experience and perceived utilitarian value were higher, the more Internet purchase intention of the fashion merchandise was higher.

• 한국정보과학회논문지:정보통신
• /
• 제30권6호
• /
• pp.787-798
• /
• 2003

IPv6(IP version 6)는 QoS(Quality of Service) 제공을 위해 플로우 레이블이라는 새로운 필드를 정의하고 있다. 기존 플로우 레이블 부여 방안인 랜덤 넘버(Random Number) 방식은 플로우에 대한 식별자 기능만을 수행함으로써 다양한 실시간 트래픽 특성에 따른 차별화된 서비스 제공에는 제약이 따른다. 본 논문에서는 플로우 레이블 필드를 플로우의 구성요소 및 QoS 파라미터로 사용하는 하이브리드(Hybrid) 방안을 제시하였다. 즉, 플로우 레이블에 사용되는 파라미터를 사용자가 표시하게 함으로써 실시간 트래픽에 대한 종단간 품질 보장과 함께 백본의 전송 자원을 효율적으로 사용할 수 있는 방법을 제시한다. 본 논문에서는 백본을 MPLS-TE(Multi Protocol Label Switching - Traffic Engineering) 환경으로 가정하고 시뮬레이션을 통해 랜덤 넘버 방식과 제안된 하이브리드 방식에 대한 성능을 평가하였다. 그 결과 하이브리드 방식이 랜덤 넘버 방식에 비해 처리 성능 및 백본 자원의 활용 측면에서 효율적인 것을 알 수 있었다.

• 대한기계학회논문집
• /
• 제7권2호
• /
• pp.153-160
• /
• 1983

The flows in an axial flow turbomachine are calculated numerically in the two sets of flow surfaces of H-S and B-B surfaces assuming that the flow is axisymmetric. The calculation is performed by regarding the governing equations as the quasi-Poisson's equations and using the finite element method for the flow regions divided into triangular elements. The results of numerical calculation agree comparatively well with the experimental results and it has been found that the distribution of an axial velocity component at the rotor exit is not necessarily uniform under the influences of the inlet guide vanes and the front shape of the hub even if the rotor is designed by the free-vortex theory. Also it has been found that the existence of the optimum value of the blade number can be estimated from the results of calculation of deviation angles at rotor exit if we consider the viscous flow-loss, and that the flows of B-B surfaces are affected very sensitively by the degree of satisfaction of Kutta condition.

• ETRI Journal
• /
• 제26권4호
• /
• pp.351-359
• /
• 2004

Flow aggregation is a scalable method to provide quality of service (QoS) guarantees to a large number of flows economically. A round-robin scheduler is an efficient scheduling algorithm. We investigate flow aggregation using a round-robin scheduler and propose the use of periodic timer interrupts for rate control of the round-robin scheduler. The proposed flow aggregator is a single-stage scheduler compared to Cobb's two-stage flow aggregator consisting of an aggregator and non-aggregating scheduler. It is possible to implement flow aggregation in the existing routers with only a software upgrade. We also present a simulation study showing the delay behaviors of the proposed algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.567-570
• /
• 2010

With continuously increasing flat panel display size, uniformity of thin film deposition has been drawing more attentions and associated fabrication methodologies are being actively investigated. Since the convective flow field of mixture gas plays a significant role for deposition characteristics of thin film in an APCVD system, it is greatly important to maintain uniform distribution and consistent concentration of mixture gas species. In this paper, computational study has been performed for the improvement of flow uniformity of mixture gas in an APCVD reactor during thin film deposition process. A diffuser slit has bee designed to spread the locally concentrated gas flow exiting from the flow distributor. A uniform flow distributor has been developed which has less dependency on operating conditions for global flow uniformity

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.35-46
• /
• 1997

In order to satisfy customer's requirements of ride comfort and high performance, it is necessary for designers to fully understand vehicle aerodynamics and wind noise of newly produced cars because characteristics of flow and wind noise are heavily dependent on each other. In this study numerical and experimental study have been carried out to analyse the effect of flow characteristics at around of rear view mirror on wind noise and soiling on the front S/W. As a result, it's found that the spiral flow mear the front pillar is weakened and spreaded because rear view mirror obstructs the flow. It is also shown that there is abrupt change of gradient of separa- tion line, separation area, intensity of spiral flow and turbulent kinetic energy with varying shape of neck and housing of rear view mirror.