• 대한유전성대사질환학회지
• /
• 제19권1호
• /
• pp.1-11
• /
• 2019

목적: 선천성 갑상선기능저하증(Congenital hypothyroidism, CH)은 전세계적으로 출생아 3,000-4,000명 당 1명의 빈도로 발생하는 신생아기에 가장 흔한 내분비질환이다. 본 연구는 1991년부터 2004년까지 남한의 선천성 갑상선기능저하증 발생률의 빈도 및 현재까지 적용되어온 광범위한 신생아 선별검사의 검사방법과 결과를 재평가하기 위해 수행되었다. 방법: 서울 지역에 위치하지만 전국적인 지사를 운영하고 있는 검사기관 서울의과학 연구소(SCL)에서는 서울 외 6개 광역시(부산, 인천, 대구, 대전, 광주, 울산)와 9개도(경기, 강원, 충북, 충남, 전북, 전남, 경북, 경남, 제주)로 한국을 15개 지역으로 분류하였다. 15개 지역으로부터 신생아의 채혈지를 수집하여 서울본원에서 수집하여, TSH 및 유리 T4를 ELISA 검사법으로 신생아선별검사를 수행하였다. SCL 데이터 및 복지부에 보고된 전국적인 양성자수를 검토하였다. 선천성갑상선기능저하증에 대한 신생아선별 검사법의 cut-off 치는 신생아 갑상선자극호르몬(TSH) 측정을 위해서는 20 mIU/L를 유리 T4의 검사를 위해서는 0.8 ng/dL 이하를 사용하였다. TSH 및 유리 T4 ELISA 분석에 기초한 선천성 갑상선기능저하증에 대해 1차 선별검사에서 선천성 갑상선기능저하증 양성은 신생아 671,805명 중 신생아 159명에서 발견되었으며, 이의 발병빈도는 4,225명 중 1명으로 추정되었다 결과: TSH 분석에서 cut-off 20 mIU/ L를 사용했을 때 민감도, 특이도 및 양성 측도(PPV)는 각각 100.0%, 99.7% 및 10.8%였다. 유리 T4 분석을 위해 0.8 ng/dL cut-off를 사용했을 때 민감도, 특이도 및 양성 예측도는 각각 100.0%, 98.5% 및 3.9%였다. 결론: NBS를 통해 얻은 CH의 발병빈도는 2004년 이전에 해외의 여러 국가에서 보고 된 발병빈도와 비교할 만큼 유사하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.192-197
• /
• 2002

In this study, examined the cutting characteristics of alumuminum alloy AC8A-T6 that is used to present car piston materials. And in been holding materials machining empirically escape as result that experiment comparison changing the cutting speed and feed on various condition to choose efficient machining condition. The following results can be summarized from this research. 1. As the cutting speed decreased, principal cutting force and thrust cutting force is increased, and reason that cutting force interacts greatly in the low cutting speed is thought by result by BUE's stabilization. 2. The feed speed and cutting speed increase, friction factor is decrescent and the cause appeared the thrust cutting force is fallen than cutting force relatively because chip flow according to increase of the feed rate is constraint. 3. Though specific cutting resistance grows cutting area and the feed rate are few, the cause was expose that shear angle decreases by rake face of tool gets into negative angle remarkably as wear of a cutting tool or defect part of workpiece is cut. 4. Cutting speed do greatly depth of cut is slow, surface roughness examined closely through an experiment that becomes bad, and know that it can get good surface that process cutting speed because do feed rate by 0.1mm/rev low more than 250m/min to get good surface roughness can.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1404-1414
• /
• 2004

This study examines how the stereotype in a society toward the roles of teachers and students affects their hair styles and ornaments and defines it through the cultural tag, 'like'. A survey of 362 male and female students in colleges located in Seoul and Gyeonggi areas was conducted. The data analysis was done by SPSS 10.0 and the difference of sample means between the groups in addition to basic statistics was evaluated. The t-test was made to test statistically significant difference between the groups. The results of the analysis are summarized as follows: First, the hair styles, shoes and ornaments that are recognized as appropriate for the roles of male students are short cut and black hair, sneakers and necktie. In that case of female students, medium and long hair style, black and brown hair, Loafer, hairpin and hairband are recognized properly. The hair styles, shoes and ornaments that are recognized as appropriate for the roles of male teachers are short cut and black hair, oxfords and necktie. In that case of female teachers, cut, medium, long, permanent and up style, 1)lack and brown hair, pumps, necklace, ring, earring, bracelet, hairpin, hairband, scarf and muffler are recognized appropriately. Second, the stereotype of male students and teachers's roles was more traditional, normative, and limited than that of female students and teachers's. The role of female teachers showed more generous than that of male students, female students, and male teachers.

• 대한간호학회지
• /
• 제30권6호
• /
• pp.1531-1542
• /
• 2000

In this paper, we examined the depression of stroke patient's caregivers and analyzed influencing factors of the depression. The subjects were 215 caregivers who have takencare of stroke survivors in their home. The conceptual model of this study consisted of the caregiver's depression, perceived burden, illness intrusiveness, and patient's ADL. Modified Korean CES-D, modified subjective and objective Burden Scale, Illness intrusiveness(II), and Instrumental Activity of Daily Living(IADL) were used to measure concepts. Path analysis was used to test the model of this study. The results were as follows: 1. The mean depression score was 11.6 which was below the cut-off score of the CES-D. This score indicates that the subjects were higher than normal adults' mean score but not depressive. Eighty-six out of 215 caregivers(40%) were above the cut-off score. This finding was different from previous research results, and the reason might be the patients' capability of ADL. In a group of low capability patient's activities of daily living, caregiver's depression score was 15.5. 2. Caregiver's depression was positively related to caregiver's burden and illness intrusiveness, but negatively related to patient's activities of daily living. 3. The caregiver's perceived burden and illness intrusiveness directly influenced on their depression. Furthermore, the and caregiver's illness intrusiveness led to depression indirectly through their burden. A patient's activities of daily living didn't influence directly on depression but indirectly through caregiver's illness intrusiveness and burden.

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.116-120
• /
• 2012

본 논문에서는 밀리미터파 응용에 사용 가능한 우수한 성능의 50 nm InGaAs/InAlAs/GaAs metamorphic HEMT를 구현하였다. 게이트 길이가 50 nm이며 단위 게이트 폭이 30 ${\mu}m$인 2개의 게이트를 가지고 있는 MHEMT의 측정결과, 740 mA/mm의 드레인 포화 전류밀도와 1.02 S/mm의 상호전달 전도도를 얻었으며 전류이득차단주파수와 최대공진주파수는 각각 430 GHz와 406 GHz의 특성을 나타내었다.

• 소성∙가공
• /
• 제24권3호
• /
• pp.181-186
• /
• 2015

Many in the industrial world that consume high amounts of energy are trying to reduce energy when manufacturing their products. Energy saving during manufacturing is a cost reduction. Reduced cost is necessary for profit improvement. The Piston Under Drive Brake used in the current study is an automotive transmission part. The original machining after hot forging was changed to machining after cold forging of a plate in order to save energy and cost. Two extrusion shapes along the outer diameter caused decreased tool life because of the interrupted cut during turning. Therefore, a thickness reduction of two extrusion areas in the outer diameter was needed. The current study suggests an effective way to reduce the thickness of interrupted cut by using progressive blanking.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• 사회경제평론
• /
• 제29권1호
• /
• pp.155-197
• /
• 2016

아리스토텔레스 이래로 많은 논자들이 인간의 능력을 존재의 형태로 파악해왔다. 주류경제학의 시장 분석, 맑스의 자본제적 노동과정 분석 심지어 사회주의 국가의 사회주의적 노동과정 분석에서 실행에 앞서 능력을 전제하였다. 물론 맑스는 자본제적 노동과정에서 능력의 가치와 실행의 가치가 다르고 생산자가 생산물을 자신의 것으로 가지지 못하는 타율성을 밝혀낸다. 사회주의적 노동과정이라고 해서 타율의 올가미를 벗겨내지 못했다. 타율의 올가미를 벗겨내고 능력을 최대한 발휘하기 위해서 발상의 전환이 필요하다. 발상의 전환은 구체적으로 노동을 수단이 아니라 삶 그 자체로서 목적인 본래의 노동으로 복원시키는 것이다. 인간의 능력은 잠재적이다. 잠재를 존재의 형태로 규정할 수 없다. 인간의 능력은 자유의지를 통해 고양될 수 있다. 자유로운 개인들의 연합의 '필요에 따른 분배' 원칙에 따라 (생활수단 뿐만 아니라 생산수단)의 개인적 소유를 재건함으로써 인간의 잠재적 능력을 고양하는 완벽한 자유를 구가할 수 있다.

• 대한임상검사과학회지
• /
• 제56권1호
• /
• pp.32-42
• /
• 2024

본 연구는 용혈의 영향과 허용 hemolysis index (HI)를 조사하기 위해 용혈된 검체와 재채혈된 검체의 결과를 비교하였다. 용혈 전·후, alkaline phosphatase (ALP), aspartate aminotransferase (AST), alanine aminotransferase (ALT), amylase (Amy), direct bilirubin (D-bil), total bilirubin (T-bil), creatine phosphokinase (CK), gamma glutamyl transferase (GGT), iron, potassium (K), lactate dehydrogenase (LDH), magnesium (Mg), phosphorus (Phos), total protein (TP), uric acid (UA) 항목에서 유의미한 결과를 보였다. LDH, K, iron, AST, CK, GGT, TP, Amy, Phos는 용혈 정도와 결과 사이에 높은 상관관계가 있었다. Quality control (QC) high standard deviation (SD)을 이용하여 구한 허용 HI, HI^QChigh를 비교했을 때 AST, D-bil, CK, LDH는 비슷했지만 Amy, GGT, K, iron, Phos, TP는 장비의 cut-off HI보다 낮은 HI에서부터 영향 받았으며 ALP, ALT는 높게 나왔다. 그리고 paired t-test를 통해 유의미한 결과가 없었던 albumin, cholesterol, triglyceride 항목에서도 HI>200에서는 유의미한 결과가 나왔기 때문에 재채혈하는 것이 바람직하다고 생각되며 HI<100일 때 영향을 받는 항목들이 있었던 연구 결과를 기반하여 약한 용혈이 나타나는 HI>50부터 용혈 기준을 설정하는 것을 권장한다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.152-159
• /
• 1999

YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) films grown on CeO$_2$-buffered r-cut sapphire substrates (CbS's) were prepared and their structural and electrical properties were measured. Post-annealed CeO$_2$ films were used as buffer layers for the experiments. It turned out that the YBCO films grown on post-annealed CbS's had the rms roughness of less than 20 ${\AA}$ and peak-to-peak roughness of about 30 ${\AA}$ when the YBCO film thickness was 3000 ${\AA}$. Meanwhile, YBCO films on in-situ grown CeO$_2$ buffer layers on r-cut sapphire substrates appeared to have the peak-to-peak roughness of more than 450 ${\AA}$. X-ray diffraction data revealed that the YBCO flms were epitaxially grown along the c-axis with the typical FWHM of(005) ${\theta}$ -2 ${\theta}$ peak about 0. 16 $^{\circ}$ and ${\Delta}$ ${\omega}$ of the (005) peak about 0.5 $^{\circ}$. T$_c$ > 87 K, ${\Delta}$T < 1 K and R(look)/R(100K) ${\ge}$3 were observed from the YBCO films. Applicability of the YBCO films for high-frequency applications was described.