• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1987

The study was performed to investigate the effect of gaseous emissions of sulfur dioxide and hydrogen fluoride on the growth of rice plants under stressed field conditions consisting of 88 industrial plants operating with 285 smoke stacks emitting pollutants. As for the relationship between yields and yield components it is believed that the panicles per hill is the single most important component affecting the rate of yield of the rice plant. Based on the standard partial regression coefficient analysis, panicles per hill has the largest contribution to yield and the average contribution of 54%. Other components such as spikelets per panicle, percent fertility and 1000 grain weight are also contributing factors to yield, although far less so. Fluorine content in the leaf appear to have more negative effect on panicles per hill, percent fertility and subsequent overall yield than does sulfur content in the leaf. It is constantly observed and interesting to note that fluorine and sulfur content in the leaf appears to have no effect on spikelets per panicle and 1000 grain weight. Reduction in yield seems to be affected mainly by panicles per hill which are, in turn, affected more by fluorine content in the leaf as demonstrated by the standard partial coefficient analysis. Regarding the prediction sum of the square of the regression equation, the lowest value was found when nine variables were used for the analysis. The variables taken into consideration were the monthly sulfur and fluorine content in the leaf as well as the monthly percent of leaf damage during the months of June, July and August. A significant correlation is found between the actual and predicted yields by the regression equations selected as a result of a prediction sum of the square analysis.

• Korean Journal of School Psychology
• /
• v.8 no.2
• /
• pp.133-152
• /
• 2011

This is a short-term longitudinal study investigating the relationships between changes in mental health and academic burnout among Korean middle school students. Study sample consisted of 409 middle school students in Seoul provision, with 161 male, 216 female, and 32 unidentified. Both Symptom Check List(SCL-47) and Maslach Burnout Inventory-Student Survey(MBI-SS) were used. In order to examine the pattern of changes in mental health and academic burnout among students, standardized residuals were calculated using regression equations which were then put into canonical correlation analysis. The results of this study are as follows. First, according to Function 1, among sub-factors of mental health, decreases in depression, compulsion, anxiety, and hostility were particularly associated with decreases in exhaustion and cynicism among academic burnout. Put in another way, students who showed increases in depression, compulsion, anxiety, and hostility experienced more academic exhaustion and cynicism. Second, according to Function 2, increases in phobic anxiety, compulsion with decreases in anxiety, depression were associated with decrease in academic exhaustion and increase in cynicism. Considering Russell's dimensional theory of emotion, Function 1 showed that mental health symptoms including both aroused and non-aroused affects were related with increases in exhaustion and cynicism while Function 2 showed that mental health symptoms including only aroused aspects were related with decrease in exhaustion and increase in cynicism. Thus, a conclusive intervention program seems to be required to deal with both aroused and non-aroused affects of students who are experiencing increased exhaustion and cynicism. On the other hand, an intervention program focused on aroused affects seems appropriate to students who are experiencing decreased exhaustion and increased cynicism. This study has its value in that it has enhanced understanding of students in school and counseling settings by revealing the relationships between mental health and academic burnout among adolescents and suggested differentiated intervention strategies based on patterns of students' academic burnout.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.33-50
• /
• 2022

While the number of female entrepreneurs has been increasing, and female entrepreneurship has been increasingly perceived as a driving force of sustainable economic development, there is a lack of studies of female entrepreneurship, particularly in the non-Western regions. This study aims to explore current levels of entrepreneurial competences of female college students in four Asian countries (i.e., Indonesia, Korea, Philippines, and Vietnam), differences in the competences between countries, and factors affecting their entrepreneurial competences. Using online surveys, the present study collected data from 516 female Asian college students and examined their entrepreneurial competences in six dimensions-entrepreneurship, sensibility, business management, relationship management, strategic management, and multi-tasking. This study also investigated effects of four variables (i.e., entrepreneurship course taking experiences, on-campus entrepreneurship experiences, off-campus entrepreneurship experiences, and entrepreneurial intentions) on the six aspects of entrepreneurial competences. Data analysis reveals that female Asian college students as a whole group possess quite high levels of entrepreneurial competences while the Filipino students show the biggest competence in all the six dimensions measured. As regards affecting factors, this study finds that, in the total sample, regression equations are significant in all the six dimensions of entrepreneurial competences. On-campus experiences have significantly positive effects on those six dimensions while course taking experiences and entrepreneurial intentions positively affect three different dimensions each. However, out-of-campus experiences turn out to be negative though their effects are insignificant. Meanwhile, in individual samples, different factors affect different dimensions of entrepreneurial competences. Based on these findings, the present study suggests some actions for promoting female entrepreneurship and for conducting future studies.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.1
• /
• pp.1-14
• /
• 1978

To study the fluctuation of cold water in the East China Sea in summer heat budget of the Yellow Sea in winter was analysed based on the oceanographic and meteorological data compiled from 1951 to 1974. The maintain value of insolation was observed in December($160{\sim}190ly/day$), while the maximum in February ($250{\sim}260ly/day$). The range of the annual variation was found to be less than 50 ly/day. The value of the radiation term ($Q_s-Q_r-Q_h$) was remarkably small (mean 20 ly/day) in winter. It was negative value in December and January, and a positive value in February. The minimum total heat exchange from the sea ($Q_({h+c}$) was found value (471 ly/day) in February 1962, and the maximum (882 ly/day) in January 1963. The annual total heat exchange was minimum (588 ly/day) in 1962, and maximum (716 ly/day) in 1968. If the average deviation of mean water temperature at 50m depth layer were assumed to be the horizontal index ($C_h$) of colder water, $C_h$ is $C_h=\frac{{\Sigma}\limit_i\;A_i\;T_i}{{\Sigma}\limit_i\;A_i}$ where $A_i$ denotes the area of isothermal region and $T_i$ the value of deviation from mean sea water temperature. The vertical index ($C_v$) of cold water can be expressed similarly. Consequently the total index (C) of cold water equals to the sum of the two components, i.e. $C=C_h$＋$C_v$. Taking the deviation of mean sea surface temperature(T'w) in the third ten-day of Novembers in the Yellow Sea as the value of the initial condition, the following expressions are deduced : $C－T'w＝32.06 - 0.049$ $\;Q_T$ $C_h-T'w/2=12.20-0.019\;Q_T$ $C_v-T'w/2＝18.07-0.027\;Q_T$ where $Q_T$ denotes the total heat exchange of the sea. The correlation coefficients of these regression equations were found to be greater than 0.9. Heat budget was 588 ly/day in winter, and minimum water temperature of cold water was $18^{\circ}C$ in summer of 1962. The isotherm of $23^{\circ}C$ extended narrowly to southward up to $29^{\circ}N$ in summer. However, heat budget was 716 ly/day, and minimum water temperature of cold water was $12^{\circ}C$ in summer of 1968. The isotherm of $23^{\circ}C$ extended widely to southward up to $28^{\circ}30'N$ in summer. As a result of the present study, it may be concluded that the fluctuation of cold water of the East China Sea in summer can be predicted by the calculation of heat budget of the Yellow Sea in winter.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.465-485
• /
• 1995

The purpose of this study is to locate the proper position of the lower occlusal plane according to individual skeletal pattern. Cephalometric films of 234 subjects of the control group, 358 of the pretreatment group and 358 of the treated group were analyzed to study proper relationships between vertical dimension ratio(VDR) and lower occlusomandibular plane angle(LOM). The control group was divided into two subgroups by the age. The first subgroup consisted of 113 subjects of the age 14 years and under and with the mean age of 10.82 years. The other subgroup consisted of 113 subjects of the age 18 years and above with the mean age of 23.76 years. The pretreatment group was divided into three subgroups by the age. The first subgroup consisted of 274 subjects of the age 14 years and under with the mean age of 11.36 years. The second subgroup consisted of 54 subjects of the age 14 through 18 years with the mean age of 15.4 years. The last subgroup consisted of 30 subjects of the age 18 years and above with the mean age of 21.35 years. The treated group was also divided into three subgroups by the age. The first subgroup consisted of 145 subjects of the age 14 years and under with the mean age of 12.91 years. The second subgroup consisted of 166 subjects of the age 14 through 18 years with the mean age of 15.64 years. The last subgroup consisted of 47 subjects of the age 18 years and above with the mean age of 21.61 years. Cephalometric films of the sample were traced. Measurements were made to a hundredth using a program specifically prepared for this study, and the results were entered into a 486DX PC. Means and Standard deviations of all the veriables were calculated for each group. Correlation coefficients between pertinent variables were calculated. Significance tests on those coefficients, one-way ANOVA and t-tests between variables or groups were performed. On the basis of the results studied above, certain subjects were selected from the control and the treated groups to locate the proper position of the occlusal plane, and designated as the optimal occluaion group. The subjects of this optimal occlusion group had 1-3 mm overbite, 1-3 mm of overjet and less than 1.75 mm of curve of Spee. A total subjects of 187 in this group consisted 104 treated subjects and 83 control group. Regression analysis was carried out between VDR and LOM, and regression equations were tabulated for this optimal occlusion group. The results were as follows : 1. Highly significant correlations were observed between various variables useful for identifying vertical component of skeletal frame, but any one particular variable did not accurately indicate the magnitude of anterior vertical overbite. 2. Of the variables useful identifying vertical component of skeletal frame, The VDR showed the highest correlation to the LOM. 3. Of the total sample, 80 percent had overbite within the normal range, irrespective of VDR. 4. The optimal occlusion group was divided into 9 subgroups by the age and the anteroposterior skeletal pattern, and correlation coefficient and determination coefficient between VDR and LOM of each group were calculated. Correlation coefficients and determination coefficients were found to be significantly high in all groups. 5. Regression equation was induced for each of the optimal occlusion group to find proper LOM according to the VDR. 6. It was found that the mean value of the cant of occlusal plane itself is not enough for a diagnosis and a treatment plan. Rather, It is very important to locate the proper occlusal plane for an Individual skeletal pattern.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.25-42
• /
• 1996

The study has been conducted to know an appropriate feeding strategy and effects of the rearing density on larval growth of the rockfish, Sebastes schlegeli. The results obtained are as fellowed ; 1. Thirty-day-old larvae reached at $25.25{\pm}3.76$ mm in total length and $0.23{\pm}0.07$ g in body weight in experiment A, at which rotifer was provided from the beginning to the end of 30-day experiment, Anemia from 3th to 18th day, and artificial feed from 13th to 30th day after hatching. When rotifer was provided for 30 days, Artemia from 6th to 18th day, and artificial feed from 18th to 30th day after hatching (experiment B), these larvae grew up to $27.52{\pm}2.50$ mm in total length and $0.26{\pm}0.06$ g in body weight. On the other hand, when rotifer and artificial feed were supplied with the same time schedule as shown in experiment B, and Artemia was feed from 6th to 30th day after hatching (experiment C), the total length and body weight of those larvae were $23.22{\pm}3.44$ mm and $0.15{\pm}0.05$ g, respectively. The best result for larval growth was obtained from experiment B. The survival rates estimated were $57.6\%$ in experiment A, $66.4\%$ in experiment B, and $44.4\%$ in experiment C. 2. The growth in total length of the larvae according to their rearing days could be represented by the following equations : Experiment A : Y=4.350+0.116X+$1.887X^2$ (r=0.993) Experiment B : Y=4.500+8.931X+$2.221X^2$ (r=0.994) Experiment C : Y=4.478+5.734X+$1.881X^2$(r=0.990) The average number of Artemia nauplius intaken by the larvae was rapidly increased between 15th and 20th day afer hatching, and 9, 212, 242, 750, and 1,171 nauplius were found in the different sizes of larvae, whose total length were 5.65, 6.81, 9.45, 14.96, and 24.52 mm, respectively. 3. Larval growth in total length and body weight reared at four different densites (A: 1.8 $kg/m^3$, B; 4.0 $kg/m^3$, C; 5.0 $kg/m^3$, D; 6.2 $kg/m^3$) indicated that the best growth was found in experiment A, at which the larval were reared at the lower density and the final survival rates extimated were $92.9\%$ in exp. A, $99.5\%$ in exp. C, $89.0\%$ in exp. B, and $88.2\%$ in exp. D. The amount of production per cubic meter turned out to be 30.45 kg in exp. D, 25.89 kg in exp. C, 20.75 kg in exp. B and 10.48 kg in exp. A. therefore, considering both larval growth and survival rate, higher yields seemed to be attainable at the relatively high-rearing density.