• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.638-644
• /
• 2012

In this study, we numerically estimated available and unavailable time of conventional railway by examining 60% which is known as average range of track utilization efficiency. We also estimated track repair time for maintenance which is the main factor of making track utilization change and analyzed appropriate estimated time. The railway's safety should be guaranteed by appropriate railway operating plan and by adequate rail facilities maintenance. At the same time, daily railway train 'Dia's recovery power should be reflected to the management plan. Considering these factors, we examined mechanical equipment and the national rail network in order to rationally estimate track repair time of the maintenance and to secure spare time in case of train delays. It was found that track utilization efficiency was more or less 60%.

• Proceedings of the Korean Society of Computational and Applied Mathematics Conference
• /
• 2003.09a
• /
• pp.1-1
• /
• 2003

In this talk, a reduced-order modeling methodology based on centroidal Voronoi tessellations (CVT's)is introduced. CVT's are special Voronoi tessellations for which the generators of the Voronoi diagram are also the centers of mass (means) of the corresponding Voronoi cells. The discrete data sets, CVT's are closely related to the h-means clustering techniques. Even with the use of good mesh generators, discretization schemes, and solution algorithms, the computational simulation of complex, turbulent, or chaotic systems still remains a formidable endeavor. For example, typical finite element codes may require many thousands of degrees of freedom for the accurate simulation of fluid flows. The situation is even worse for optimization problems for which multiple solutions of the complex state system are usually required or in feedback control problems for which real-time solutions of the complex state system are needed. There hava been many studies devoted to the development, testing, and use of reduced-order models for complex systems such as unsteady fluid flows. The types of reduced-ordered models that we study are those attempt to determine accurate approximate solutions of a complex system using very few degrees of freedom. To do so, such models have to use basis functions that are in some way intimately connected to the problem being approximated. Once a very low-dimensional reduced basis has been determined, one can employ it to solve the complex system by applying, e.g., a Galerkin method. In general, reduced bases are globally supported so that the discrete systems are dense; however, if the reduced basis is of very low dimension, one does not care about the lack of sparsity in the discrete system. A discussion of reduced-ordering modeling for complex systems such as fluid flows is given to provide a context for the application of reduced-order bases. Then, detailed descriptions of CVT-based reduced-order bases and how they can be constructed of complex systems are given. Subsequently, some concrete incompressible flow examples are used to illustrate the construction and use of CVT-based reduced-order bases. The CVT-based reduced-order modeling methodology is shown to be effective for these examples and is also shown to be inexpensive to apply compared to other reduced-order methods.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• School Mathematics
• /
• v.15 no.2
• /
• pp.353-367
• /
• 2013

A mathematics pre-service teacher T analyzed American mathematics textbooks and developed his teaching material for instruction. This study analyzed his thinking processes and results in the view of semiotics. If we regard the textbook as a sign and the unitary conversion that students should learn as an object of the sign, the interpretant of the sign is the pre-service teacher's analysis, which is conducted at the aspects of a subject matter knowledge and student understanding. T interpreted the textbook versatilely in terms of his knowledges and experiences. He developed his teaching materials as diagrams, did the diagrammatic thinking and became to have the hypostatic abstraction. This study is significant because it used semiotics for explaining T's thinking process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.364-371
• /
• 2017

TPMS is a vehicle electric system that measures the air pressure of a tire, and informs the driver of current tire states. The TPMS sensor typically uses unidirectional communication for small size, light weight, and low power. The transmission period of the sensor indicates the service quality of monitoring the tire. In order to determine the optimal transmission period, frame collision probability and the life time of the sensor should be analyzed. In this paper, collision probability model using Venn diagram is designed in low power TPMS with the normal and warning mode. And the life time and a collision probability were analyzed with the ratio(n) of the normal mode to warning mode transmission period. As a result, $T_{nP}=31sec$ and $T_{wP}=2.4sec$ at 5 years, and $T_{nP}=71sec$ and $T_{wP}=2.5sec$ at 7 years.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.1
• /
• pp.132-143
• /
• 2005

In order to investigate the seasonal variation of watermass and fishery creatures in the adjacent sea of Naro Island, an oceanographic observation was carried out seasonally on the fishing grounds, and the sales performance data of the fisheries cooperative's joint market of Naro Island was examined by using a principal component analysis. The temperature and salinity ranged from 8.1 $^{\circ}C$ to 13.7 $^{\circ}C$ and from 33.1 psu to 34.3 psu in spring, from 14.5 $^{\circ}C$ to 24.2 $^{\circ}C$ and from 30.5 psu to 34.1 psu in summer, from 14.8 $^{\circ}C$ to 18.6 $^{\circ}C$ and from 30.1 psu to 34.0 psu in autumn, and from 4.3 $^{\circ}C$ to 10.1 $^{\circ}C$ and from 33.1 psu to 34.9 psu in winter, respectively. In winter and spring, the offshore water spread out to all sea areas of all water layers. In summer, the mixed waters covered the entire sea surface whereas the mixed water and offshore water covered the bottom. In autumn, the coastal water and mixed water appeared on the surface, but the mixed water was distributed widely on the bottom and the offshore water began to appear in the open sea. For two years from 2002 to 2003, 58 fishery creature species in total were sold in the fisheries cooperative's joint market of Naro Island. In general, the total of 50% fish were sold, and crustacea and mollusc by each 25%. Medium shrimp, whiparm octopus, blue crab, and octopus predominated. A number of species and biomass of fishery creatures were sold mostly in April and May, while they were sold the least in January and February. The seasonal sales results showed that mullet, angler, short necked clam, large shrimp, and webfoot octopus were sold mainly in spring, tonguefish, flathead, pomfret, glass eel, blue crab, whiparm octopus, and squid were sold mainly in summer, and octopus, medium shrimp, and spanish mackerel were sold mainly in autumn.

• The Research Journal of the Costume Culture
• /
• v.23 no.6
• /
• pp.1038-1050
• /
• 2015

This study is a theoretical research to investigate a methodological framework for analyzing the representation of women in fashion photography. For this study, this article attempts to develop a conceptual framework of the visual representation system through Lacan's gaze theory, and analyze the representational aspects of women configured by gendered characteristics in the visual representation system. Structuralizing the visual representation system based on that theory, the gaze, the image/screen, and the subject of representation in the Lacan's triangle diagram are replaced by the camera as the signifier of gaze, the representational image, and the seeing subject respectively. In the visual representation system, the camera creates a male-oriented visual field and structures a relationship of gendered power between male gaze as the seeing subject and female eye as an object to be seen. Looking into the representational aspects of women in this visual representation system structuralized by male gaze, women are represented in a way that reflects male desire through masquerade to comply with the patriarchal gaze, or differences that emphasizes the uniqueness and autonomy of women released from a patriarchal discourse. This study would be significant in that it provides theoretical basis for an analytic approach to the representation of women in fashion photography which we accept as a fixed one through the ideology of naturalization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3052-3060
• /
• 2013

When planning to construct adjacent structure by the side tunnel, the criteria of safety zone of tunnel have been proposed. There are no specific theoretical basis regarding load conditions and the distance of structure and the geological strata and the conditions of adjacent structure's location, and the conditions applied load. Two and three dimensional numerical analysis preformed to prove the deformation of the ground and structures caused by the tunnel excavation and evaluated the correlation and the suitability of the tunnel's safety zone regarding the location of adjacent structures and the changes in the modulus of deformation. This paper proposed the safety zone's range is getting bigger as the modulus of deformation is higher. Also, it seems that the possible range of construction under constraints in the diagram of revalued safety zone significantly expands as shear failure line appears on the invert extension line below the spring line.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2001

This paper presents further investigation into the effect of over-expansion cycle in a spark-ignition engine. On the basis of the results obtained in previous studies, several combinations of late-closing (LC) of intake valve and expansion ratio were tested using a single-cylinder production engine. A large volume of intake capacity was inserted into the intake manifold to simulate multi-cylinder engines. With the large capacity volume, LC can decrease the pumping loss and then increase the mechanical efficiency. Increasing the expansion ratio from 11 to 23.9 with LC application can produce about 13% improvement of thermal efficiency which was suggested to be caused by the increased cycle efficiency. The decrease of compression ratio from 11 to 5.5 gives little effect on the thermal efficiency if the expansion ratio could be kept constant. Thus, the expansion ratio is revealed to be a determining factor for cycle efficiency, while compression ratio is no more important, which suggests the usefulness of controlling the intake charge with intake valve closure timing. These were successfully explained by simple thermodynamic calculation and thus the mechanism could be verified by the estimation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1278-1285
• /
• 2003

This study investigated the phase transformation of the REBa$_2$Cu$_3$$O_{7-x}$ (RE=Nd, Gd, Dy) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. The peritectic temperature of the 123 phases decreased approximately 3$0^{\circ}C$ when the ionic radius of the rare-earth elements was reduced. The optimum cooling rate where BC and Cu-free phases do not exist was 0.001$^{\circ}C$/s. At this cooling late, the 123 phase grew with a c-axis Perpendicular to the surface and had a well-distributed 211 phase. When the oxygen partial pressure was reduced Outing isothermal heat-treatment, the formation temperature of the 211 phase decreased. In addition, the formation temperature of the 123 phases decreased from 100$0^{\circ}C$ (Nd-123) to 9$25^{\circ}C$ (Gd-123), and finally 875$^{\circ}C$ (Dy-123) according to the decrease in the ionic radius of the tare-earth elements. Compared to Nd-123, Gd- and Dy-123 had a better texture with a well-distributed 211 phase.e.