• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.382-386
• /
• 2011

It has been required to develop a defect detection system to perform defect detection capabilities after the bonding process in the production of RFID tags. However, we are difficult to design a system with understanding the characteristics of RFID tags and design concepts. Also we are difficult to modify even minor changes in features. In this paper, we design the defect RFID detection system using UML and object-oriented design techniques. We suggest the method for apply the UML Diagram to LabVIEW OOP and the technique for redesign the effect detection system's changes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.61-69
• /
• 2005

The topology of NPC inverter coupled with the large number of devices used increases the probability of device failure. It's necessary to develop an optimal remedial strategy which can be used to continue the application when fault occurs. The fault tolerance is obtained by the use of the proposed method. The proposed method utilizes that the one phase load with the failed power device could be connected to the center-tap of the DC-link capacitor in order to dc-link voltage with balance and the sinusoidal phase current with constant amplitude under the single power device fault condition. The strategy described in this paper is expected to provide an economic alternative to more expensive redundancy techniques.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.155-164
• /
• 2010

This paper presents a voltage control algorithm for a hybrid multilevel inverter based on a staged-perception of the inverter voltage vector diagram. The algorithm is applied to control a three-stage eighteen-level hybrid inverter, which has been designed with a maximum number of symmetrical levels. The inverter has a two-level main stage built using a conventional six-switch inverter and medium- and low- voltage three-level stages constructed using cascaded H-bridge cells. The distinctive feature of the proposed algorithm is its ability to avoid the undesirable high switching frequency for high- and medium- voltage stages despite the fact that the inverter's dc sources voltages are selected to maximize the number of levels by state redundancy elimination. The high- and medium- voltage stages switching algorithms have been developed to assure fundamental switching frequency operation of the high voltage stage and not more than few times this frequency for the medium voltage stage. The low voltage stage is controlled using a SVPWM to achieve the reference voltage vector exactly and to set the order of the dominant harmonics. The inverter has been constructed and the control algorithm has been implemented. Test results show that the proposed algorithm achieves the desired features and all of the major hypotheses have been verified.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1241-1252
• /
• 1999

It is proposed in TINA, the open information telecommunication network architecture, that the definition of object group which is collection of objects provides a decrease of complex networking and a facility of object managing by service executing of application on distributed computing environment. Based on a new distributed object group model[13] we have been researched according to TINA specification, this paper proposed the object group model with the scheduler object and objects management mechanisms that can support real-time services on CORBA. To do this, we described the definition of object grouping and the requirements to suggest the object group model supporting real-time service, designed the object group structure and functional components containing in an object group using James Rumbaugh's modelling[12], and showed a class diagram of components in an object group. This paper designed IDLs of an object group manager and scheduler among the components, and finally showed the procedures of management and service interconnections between objects in the different object groups vi ETD.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2717-2719
• /
• 2003

In this paper, we developed an efficient virtual experiment kit with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since our virtual experiment kit is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, our web-based virtual experiment kit is designed to enhance the efficiency of both the learners and the educators. The learners will be able to achieve high learning standard and the educators save time and labor. The virtual experiment is performed according to the following procedure: (1) Circuit Composition on the Bread Board (2) Applying Input Voltage (3) Output Measurements (4) Checkout of Experiment Results. Furthermore, the circuit composition on the bread board and its corresponding online schematic diagram are displayed together on the virtual experiment kit for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.1
• /
• pp.45-50
• /
• 1993

The phenomenon of wave diffraction due to structure is an important factor in the wave climate at the site As an approximation, the propagation characteristics of a regular wave train are usually used. instead of those of irregular waves. However, there are great differences between the diffraction coefficients of the irregular waves and monochromatic waves, as shown by Goda (1985). The spectral calculation method. one of the methods to deal with the transformation of random sea waves essentially consists of decomposing a spectrum of the irregular sea state Into various monochromatic components, and assembling the component results by linear superposition. Monoch romatic wave transformation model developed by Chen(1987) is used to make spectral calculation. These calculations agree closely with Goda et al. (1978)'s diffraction diagram for a thin semi-infinite breakwater.

• Korean System Dynamics Review
• /
• v.17 no.3
• /
• pp.91-120
• /
• 2016

This study explores hedge fund characteristics that affect hedge fund performance, namely, fund size, fund age, and performance fee. Previous studies have examined relationships between hedge fund characteristics and fund performance using singular and static thinking to report inconsistent findings without providing full understanding of the causal relationships among variables. To identify that comprehensive causal relationships between hedge fund characteristics and hedge fund performance, this research applies the system dynamics perspective, which allowed demonstration of the interactions within the overall system beyond the singular causal relationships between hedge fund characteristics and performance found in existing traditional research. This study contributes to existing literature in the following ways. First, it overcomes the limitations of singular research methodologies by looking at the integrated system of hedge fund characteristics and fund performance from a bird's eye view based on their dynamic feedback relationships. Second, policy suggestions in terms of regulation and education are presented as growth strategies for the sustainable development of the Korean hedge fund market.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2003.05a
• /
• pp.319-328
• /
• 2003

With the proliferation of WWW, providing more intelligence to Web sites has become a major concern in e-business industry. In recent days, this trend is more accelerated by prosperity of CRM (Customer Relationship Management) in terms of various aspects such as product recommendation, self after service, etc. To accomplish this goal, many e-companies are eager to embed web enabled rule-based system, that is, expert systems into their Web sites and several well-known commercial tools are already available in the market. Most of those tools are developed based on CGI so far but CGI based systems inherently suffer over-burden problem when there are too many service demands at the same time due to the nature of CGI. To overcome this limitation of the existing CGI based expert systems, we propose a new form of Web-enabled expert system using hyperlink-based inference mechanism. In terms of burden to Web server, our approach is proven to outperform CGI based approach theoretically and also empirically. For practical purpose, our this approach is implemented in a software system, WeBIS and a graphic rule editing methodology, Expert Diagram is incorporated into the system to facilitates rule generation and maintenance. WeBIS is now successfully operated for financial consulting in the web site of a leading financial consulting company in Korea.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.495-499
• /
• 2000

The booming noise of a vehicle is usually caused by the vibration of the vehicle's body transmitted from the engine through the mounting system. Thus the engine mounting system must be cautiously designed to reduce the noise. Vector synthesis analysis is performed to predict the booming noise when the characteristic of the engine mounting system is changed., i.e., when magnitudes and phases of vibratory forces after the mounts are altered. To effectively use the method, the concept of 'effectiveness' is introduced to identify the contributions of each vibration sources and transmission paths to interior noise. When the magnitudes and phases of the forces due to the engine vibration are changed, the synthesized interior booming noise level is predicted by the vector synthesis diagram. Thus, the optimum characteristics of the forces are obtained through the simulations of the vector synthesis analysis. It is shown that the vector synthesis method can be used to obtain the optimum design characteristic of the mounting system to control the interior booming noise of a vehicle.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.177-184
• /
• 2006

시스템의 동적 요소를 기술하고 분석하기 위해 C&C view 아키텍처를 주로 사용하지만 시스템의 실행 순서나 상태에 대한 정보가 부족하기 때문에 단지 C&C view 아키텍처로만 시스템의 동적 요소를 분석하기가 어렵다. FSP model은 시스템의 동작을 표현하기 위한 모델링 언어로써 시스템의 동작을 모델링 할 뿐만 아니라 LTSA라는 FSP 검증 툴을 이용하여 시스템의 특성을 자동으로 파악하기에도 용이한 특성을 가지고 있어 시스템 동적 요소 분석에 도움을 준다. 하지만 관련 정보를 얻기 어려워 FSP model을 구현하는데 어려움이 있다. 이 논문은 C&C view 아키텍처와 요구 사항(Use Case Scenario 혹은 Sequence diagram)을 근간으로 시스템의 동적 요소를 FSP로 모델링 하는 방법을 정의한다. 또한 LTSA 툴을 이용하여 자동적으로 시스템의 특성을 검증할 수 있고, 이를 통해 시스템 구현 전에 시스템의 에러를 찾아내고 해결하는 도움을 줄 수 있다. C&C view 아키텍처는 시스템의 컴포넌트와 커넥터에 대한 정보를 제공하여 주고 요구 사항은 소프트웨어 시스템의 행동에 대한 정보를 제공하여 줄 수 있다. 만약 우리가 컴포넌트와 커넥터에 대한 정보가 있고 시스템 동적 요소에 대해 알고 있다면 우리는 이것을 기반으로 메시지 흐름도를 구현할 수 있다. 메시지 흐름도는 Harel, Kugler 와 Pnueli에 의해 개발된 Synthesized 알고리즘을 이용하여 Statechart로 만들어지고 이것은 바로 FSP model로 변환될 수 있다. 우리가 소프트웨어 시스템에 대한 FSP model을 가지고 있다면 이것을 기반으로 시스템 행동 특성을 체크할 수 있으며 이는 향후 발생할 수 있는 결함을 미리 찾아내는데 유용한 도움이 될 수 있다. 우리는 간단한 예제를 통해 본 논문의 이론을 수립하였으며 이를 기반으로 실제 어플리케이션에 적용하여 그 효용성을 검증하였다.