• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.6
• /
• pp.323-330
• /
• 1988

The spatial distribution of sea water temperature variation pattern in the South-eastern coastal region of Korea was studied by empirical orthogonal function (E. O. F) analysis in several depths from surface to 300m using the monthly mean water temperature averaged for 23 years, water mass analysis by T. S diagram and sectional diagram of water temperature. Typical type of water temperature variation in this area can be divided into surface (0m-50m), subsurface (100m-150m) and intermediate (200m-300m) layer. The first mode value of water temperature change on the surface layer showed $99\%$ of total variation, and decreased with the increase of the depth. It is deduced to be in the range of $60-70\%$ on the 300m layer. The representative type of water temperature fluctuation by the first mode in each layer is as follows. Water temperature change in the surface layer showed a seasonal variation. In the subsurface layer, it is governed by the interaction of the Tsushima Warm Current water with the cold water and by the heat transfer process from the upper layer. In the intermediate layer, water temperature variation seems to be governed by the advection of the bottom cold water.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.55-70
• /
• 2001

Granitoids in the Younggwang-Kimje area can be divided into two types of granite. One is foliated granite (Cheongup and Kochang foliated granites) developed along the NE-SW direction kwangju fault system and the other is undeformed granite (Kimje and Younggwang granites) developed in the western part of the area. $SiO_2$ content of study area, Younggwang granite is 62.8-74.0%, Kochang foliated granite is 64.5-74.4%, Cheongup foliated granite is 64.5-70.2%, Kimje granite is 63.4-72.0%. The result indicated that these granitoids belong to the intermediate and acidic rock. In Harker's diagram, as $SiO_2$ increases, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$> $P_2O_{5}$s and MnO decrease, but $K_2O$ increases. In AFM diagram, Younggwang granite, Kochang foliated granite, Cheongup foliated granite and Kimje granite belong to calk-alkaline rock series. And in triangular diagrams of normative Qz-Or-Pl and An-Ab-Or, they are located in granodiorite and granite region. On the co-variation diagrams of trace elements with silica, Ba, Co, Li, Nb, An, Rb elements show increasing patterns. The diagrams of ACF and $Na_2O$ vs. $K_2O$ ratios indicate that granitoids of the study area belong to I-type.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.25-34
• /
• 2011

In this paper we present an integrated design methodology for relational database based on object-oriented analysis and design. The integrated design methodology is based on business profile and has six phases. In the first phase, business use cases are identified and described by macroactivity diagrams and then the macroactivity diagrams are transformed to detailed business activity diagrams by using objects, object flows and business worker's responsibilities. In the third phase, the detailed business activity diagrams are transformed to business class diagrams that describe the static structure of the entire business system based on detailed business activity diagrams. In the four phase, the business class diagrams are transformed to class diagrams that represent the initial conceptual model of the target relational database. In the five phase, we add additional transformations on the class diagrams with generalization and specialization of associations, roles, activities, additional classes and redundant associations. Eventually, the final class diagrams are transformed to relational database schema. The methodology presented in this paper by applying that proposal for organic connection between object-oriented analysis and design methodology and relational database design methodology. And it will be able to deal with integration management. By the integrated design methodology, we can make more easily software systems based on relational database. In the case study, proposal integrated design methodology applied for a visa issuing system.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.857-869
• /
• 2015

The aluminum 7075-T6 is known as an alloy widely used in aircraft structural applications, which does not exhibit strain rate sensitivity during dynamic compressive tests. Despite mechanical importance of the material, there is not enough attention to determine appropriate sample dimensions such as a sample diameter relative to the device bar diameter and sample length to diameter (L/D) ratio for dynamic tests and how these two parameters can change mechanical behaviors of the sample under dynamic loading condition. In this study, various samples which have different diameters of 31.8, 25.4, 15.9, and 9.5 mm and sample L/D ratios of 2.0, 1.5, 1.0, 0.5, and 0.25 were tested using Split Hopkinson Pressure Bar (SHPB), as this testing device is proper to characterize mechanical behaviors of solid materials at high strain rates. The mechanical behavior of this alloy was examined under ${\sim}200-5,500s^{-1}$ dynamic strain rate. Aluminum samples of 2.0, 1.5 and 1.0 of L/D ratios were well fitted into the stress-strain curve, Madison and Green's diagram, regardless of the sample diameters. Also, the 0.5 and 0.25 L/D ratio samples having the diameter of 31.8 and 25.4 mm followed the stress-strain curve. As results, larger samples (31.8 and 25.4 mm) in diameters followed the stress-strain curve regardless of the L/D ratios, whereas the 0.5 and 0.25 L/D ratios of small diameter sample (15.9 and 9.5 mm) did not follow the stress-strain diagram but significantly deviate from the diagram. Our results indicate that the L/D ratio is important determinant in stress-strain responses under the SHPB test when the sample diameter is small relative to the test bar diameter (31.8 mm), but when sample diameter is close to the bar diameter, L/D ratio does not significantly affect the stress-strain responses. This suggests that the areal mismatch (non-contact area of the testing bar) between the sample and the bar can misrepresent mechanical behaviors of the aluminum 7075-T6 at the dynamic loading condition.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.231-237
• /
• 2005

The sizes and structure of micelles and vesicles formed in ammonium dodecyl sulfate (ADS)/octadecyl trimethyl ammonium chloride (OTAC) mixed aqueous solutions were analyzed by small-angle neutron scattering. In micellar regions of pure ADS and OTAC aqueous solution, the spherical micelles were formed at given concentrations and their sizes were 40 and $61{\AA}$, respectively. The structure transition of pure micelles occurred above 300 mM due to the constancy of the intermicellar distance above 250 mM. The coexisting region of mixed micelles and vesicles in phase diagram of mixed system was also assured. It was investigated that vesicle formed spontaneously took a bilayer structure. The lamellar thickness of vesicles decreased with increasing concentration of vesicle samples. However, the size could not be determined for mixed micelle and vesicle above 100 nm due to limitation of low q ranges. Finally, The 9 mM solution of ADS mole fraction 0.9 (${\alpha}$=0.9) showed bilayer structure compared to phase diagram classified into mixed micelle.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.84-91
• /
• 2021

In the 21st century, a number of storm and flood disasters caused by rapidly changing climate change is increasing, and the number of flood accidents at construction sites is also increasing. However, no specific reduction measures have been presented and thereby safety management to prevent flood accident need to be improved. Therefore, in this study, the inundation pattern by downpour at the excavation site was interpreted and the inundation risk quantification method was used to classify the risk magnitude. Finally, using the fish-bone diagram, we derived the major reasons of inundation accident at construction site systematically. The simulation results showed that the inundation depths of small-scale excavation sites and excavation sites exceeded 3 m due to the fluid flowing through the excavation surface. In addition, depending on the excavation site, a high velocity temporarily observed and decreased due to the storage effect, or high velocity surpassing 10 m/s continued. Since this type of flooding can pose a risk to most or all workers, if proper management measures are insufficient, fatal damage to life and property could occur. Consideration of the roots of these disasters is judged to be helpful in understanding the causes of inundation accidents that result in casualties and presenting accident reduction measures.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.5
• /
• pp.1285-1290
• /
• 2004

From a view point of Hyungsang medicine a study is made on depressive syndromes through 'Donguibogam(東醫寶鑑)' ,'Clinical lectures by Mr. Jeesan(芝山先生 臨床學特講)' and other literature. Depressed energy(?) originally meant the disorder of vital energy in the circulation of nature with the lapse of time. In later, it has been changed to mean the disease of man, especially related to the mind. Depressive syndromes come from the stagnation of the Ki or the abnormal circulation(rising, falling, coming and going), which happens when man cannot adjust oneself to the circumstances due to the disharmony between internal and external conditions. Depressive syndrome easily attacks the following types of persons; Dam type person with excessive Ki and deficient Hyung(形), manly woman, womanly man, Bird type person who shows a great variety of emotion, Turtle type person declined to melancholy, Ki type person apt to be depressive, and Shin type person with upward gush of the fire. It also attacks the persons who have smudgy face with the scar between eyebrows, those whose pulses are mixture of two different kinds and those whose pulses extend on two ranges in Jeesan's diagram. Depressive syndromes recorded in 'Donguibogam' are globus hystericus, chest congestion, gastric discomfort, cough and asthma caused by depressed Ki, abdominal mass, edema, and tympanites. The most effective prescriptions for depressive syndromes are Eajintang(二陳湯), Guibitang(歸脾湯), Hyangsosan(香蘇散), and Gamisachiltang(加味四七湯).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5120-5126
• /
• 2010

ABLB(Alternate Binaural Loudness Balance) test is one of the medical assessments to diagnose detailed lesion of sensory-neural hearing loss based on a recruitment phenomenon. This paper describes an Auto ABLB test software. This software automatically decides test frequency and intensity of first test tone. And it supports an automatic algorithm that analyses the subject's reponses in the current step and then decides intensity of tone provided in next step. Also, this software supports an interface to control and monitor subject's ABLB test. The assessment result is represented by a ladder diagram. The output of this software has been verified using a digital oscilloscope.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.56-65
• /
• 1994

Total quality management has been a focus of concern in recent years since some dissatisfaction with the results from implementation of quality assurance programs in the U.S. Many managerial methodologies and innovation guidelines from academic disciplines have been applied to promote TQM programs in the health field. This paper consists of two folds of aspects: firstly to examine TQM's managerial philosophy by comparing with the newly introduced managerial concepts in Business Reengineering; and then to introduce a method for an integrative way of process analysis, Entity Life-Cycle Diagram (ELCD) modeling. The analysis method was compared with Process Map, which is a well-known method for BR applications. To show effectiveness of ELCD modeling, a case of application was introduced using 'drug' as a target entity. With having TQM issues in mind, the result was reflected in designing Entity Relation Diagrams. The results of ELCD modeling turn out to be helpful in designing database related to quality monitoring, in that many monitoring check points can be identified in a systematic way and that queries cross-sectional over organizational boundaries can be generated with a consistent view focusing on the drug use as a single process. Full evaluation of the analysis method remains to be studied until the completion of the information system under construction. But as long as TQM is based on a process-oriented view and needs supports from information system, ELCD can be one of the appropriate choice as a tool for the process analysis.

• Journal of Korean Medical classics
• /
• v.30 no.3
• /
• pp.55-76
• /
• 2017

Objectives : The transition of the 29 diagrams of Heart originated from MingTangZangFuTu will be used to understand the shape of heart and the changes of people's understanding of heart. Methods : The 29 diagrams of Heart originated from MingTangZangFuTu are divided according to their shape elements (Heart itself, internal curvatures, structures above heart, wuzangxi, and excursus). Then its transitions are analyzed, and each shape element is compared to modern anatomy and its textual basis is searched. Results : The lengthy cylinderical organ situated above the heart is composed of upper part consisting with joints and the lower part void of joints. The upper part is Pyewan (such as the lungs) and fall into trachea. The lower part is Xinxi or Feixi which are either relative vein (or aorta) or left bronchus that passes behind the heart. This depiction of the structures around the heart can be considered to have composed by actual observance of a physical heart, a method that is similar to anatomy. However, the shape of the heart itself is described as a lotus flower that has not been bloomed, a depiction which finds its origin from Zhongguangbuzhu huangdineijing suwen (762). The three short curvatures inside the heart is described as Pericardium, influenced by Shisijingfahui (1341) in its depiction, or as sammo, influenced by Nanjing. Structures that are connected directly from the heart to spleen, kidney, and uterus are not found in modern anatomy. The saying in Excursus "All cords of five internal organs belong to heart" is based on Huatuoxuanmenneizhaotu, and this is changed to the saying cords of four internal organs belong to heart in Leijingtuyi for the first time. Conclusions : The authors of medical scriptures at the time did not have a method of direct observance when they were copying heart diagrams. Therefore, they made changes to the source material's diagram and excursus while being influenced by Nanjing, Huatuoxuanmenneizhaotu, and Shisijingfahui. Then the doctors' understandings with regards to the shape and function of heart were reflected during that process.