• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.7-20
• /
• 2005

Ceremony is important to Buddhism as a part of the religious practice. Buddhist ceremony is a kind of discipline and it rules the Chan monastery life. This discipline, called $\ulcorner$Qinggui(淸規)$\lrcorner$ also forms a part of the practice for enlightenment in the Chan monastery(禪宗). Qinggui is derived from $\ulcorner$Baizhang's monastic code(百丈淸規)$\lrcorner$ which no longer exists. $\ulcorner$Chanyuan qinggui(禪院淸規)$\lrcorner$ is considered the oldest surviving Chinese monastic discipline. Its success is partly due to the emphasis in the Chan monastery on the succession of monks to abbot hood. Qinggui has been called the only discipline in Buddhist monastic life in religion. Whether it is also the discipline of the architectural space of the Chan temples is the focus of this thesis. The examination of this assumption may expand the meaning of Qinggui as embodying not only the religious form of discipline but also a fundamental part of the architectural archive. The majority of the buildings in the Chan monastery in Qinggui are related to $\ulcorner$Five Mountains Ten Checks figures$\lrcorner$. Most of all, it can be clarified that the elements of Qinggui are expressed through the analysis of the activities in each building. This proves that Qinggui has become a stipulation not only for the regulation of the monastery life but also the architectural code of the Chan temples. In conclusion, this study shows how the meaning of ceremony and monastery life in $\ulcorner$Chanyuan qinggui$\lrcorner$ can be expanded to include the design program of temples. The research proves that there is a basic code in the Chan temples for designing the structure of the monastery space. Similarly, $\ulcorner$Five Mountains Ten Checks Figures$\lrcorner$ was a diagram for examination and analysis as well as a tool for creating drawings of the temples in the Song era.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.1-10
• /
• 1993

In order to investigate the environmental properties of set net grounds located in the coastal waters of Yeosu, oceanographic observations on the fishing grounds were carried out by the training ship of Yeosu Fisheries University from Jun. 1988 to Dec. 1990. The resultes obtained are summarized as follows; 1) The water mass in the fishing grounds were divided into the inner water (29.50-31.00$\textperthousand$), the mixed water (31.10-32.70$\textperthousand$) and the offshore water (32.70-34.30$\textperthousand$) according to the distribution of salinity from T-S diagram plotted all salinity data observed from Jun. 1988 to Dec. 1990. In spring the mixing water prevailed and in summer the inner and mixing water. But in autumn and winter the mixing and offshore waters prevailed. 2) The inner water which was formed by land water from the river of Somjin and the precipitation in the Yeosu district flowed southerly along the coast of Dolsando and spread south-easterly in the vicinity of Kumodo. The inner water and offshore water which supplied from the vicinity of Sorido and Yokchido formed the thermal front and halofront. 3) As the mixing water flowing from the western sea of Cheju to the southern coast of korea was low in temperature, the water mass of low temperature which appeared at the offshore bottom of Sorido in summer was considered not to be the Tsushima warm current. 4) As vertical mixing was made frequently in spring, autumn and winter, the differences in temperature and salinity between surface and bottom was respectively small. In summer, however, the mixing was not made because of the inner water expanded offshore through the space between surface and 10m layer and so a thermocline of $2.0^{\circ}C$/10m and halocline of 4.0$\textperthousand$/10m respectively in vertical gradient was formed. 5) In the vicinity of Dolsando and Kum a water low in salinity prevailed, but in the vicinity of Namhaedo and YoKchido the reverse took place. The inner and mixing waters formed at these arease was limited to the observation area not to spread widely.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.147-159
• /
• 1983

In general, herbicides have been classified according to selectivity, mobility. time of application, methods of application, mode of action and chemical property and structure. However, there was no generally accepted classification system for practical use in the field. The primary processes affected by the majority of herbicides are the growth process through cell elongation and/or cell division, the photosynthetic process specifically the light reaction, the oxidative phosphorylation and the integrity of the membrane systems. The usual approach in the study of the mechanism by which herbicides kill or inhibit the growth of plants is to initially determine the morphological phototoxicity systems, The mechanism by which a herbicide kills a plant or suppresses its development is actually the resultant effect of primary and secondary(or side) effects. In most instances, the death of the plant is due to the secondary effects. To induce the desired response, a herbicide must be able to gain entry into the plants and once inside, to be transported within the plant to its site(s) of activity in concentrations great enough. Obstacles to the entry and movement of herbicides in plants are generally classified by leaf and soil obstacles, translocation obstacles and biochemical obstacles, and these obstacles are also strongly influenced by plant species and by environmental factors such as light, temperature, rainfall and relative humidity. And hence, in most instances, results obtained from laboratory or greenhous vary from those of field experiment. Author attempted to classify herbicides from the field experiment using the two-dimensional ordination analysis to obtain practical information for selecting effective herbicides or to choose effective herbicide combinations for increasing herbicidal efficacy or reducing the chemical cost. Based on this two-dimensional diagram, desired herbicides or combinations were selected and further investigated for the interaction effects whether these combinations are synergistic, additive or antagonistic. From the results, it was concluded that these new approach could possibly be give more comprehensive informations about effective use of herbicide than any other systems.

• Journal of the Korean School Mathematics Society
• /
• v.13 no.1
• /
• pp.125-141
• /
• 2010

The aim of this paper is to develop a web-based Virtual Learning System for discrete mathematics learning using CAS (Computer Algebra System), The system contains a series of contents that are common between secondary und university curriculum in discrete mathematics such as sets, relations, matrices, graphs etc. We designed and developed web-based virtual learning contents contained in the proposed system based on Mathematia, webMathematica and phpMath taking advantages of rapid computation and visualization. The virtual learning system for discrete math provides movie lectures and 'practice mode' authored with phpMath in order to enhance conceptual understanding of each movie lesson. In particular, matrix learning is facilitated with conceptual diagram that provides interactive quizzes. Once the quiz results are submitted, Bayesian inference network diagnoses strong and weak parts of learning nodes for generating diagnostic reports to facilitate personalized learning. As part of formative evaluation, the overall responses were collected for future revision of the system with 10 university students.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.53-67
• /
• 1995

Geochemical characteristics of iron-related Ulsan granite was studied in comparison with the Cretaceous granitoids from the metallogenic provinces of copper, lead-zinc and lead-zinc/molybdenum in the Gyeongsang Basin, and the variation of cheminal compositions at the Ulsan granite/serpentinite contact was investigated. Ulsan granite is plotted in the regions of granite and granodiorite of Streckeisen's diagram. It shows differentiation trend of calc-alkali magma, and the magmatic evolution from granodiorite to granite is consistant with the general crystallization path of the Cretaceous the granitoids in Gyeongsang Basin. Differentiation index(D.I.) of Ulsan granite is 86~95, which is higher than those of Jindong granites (D.I.=45~70) and Onjongri granites (D.I.=67~84), and there are differences in the content of some major and trace elements between Ulsan granite and other Cretaceous granitoids. At the Ulsan granite/serpentinite contact $SiO_2$, $K_2O$, $Na_2O$, $Al_2O_3$, Rb, Sr, Ba which are abundant in Ulsan granite decrease toward serpentinite, while T.Fe, MgO, Ni, Cr which are abundant in serpentinite decrease toward Ulsan granite. Therefore, the geochemical characteristics of Ulsan granite is applicable to distinguish iron province from different metallogenic provinces where other Cretaceous granitoids occur in the Gyeongsang Basin, and it is possible to find serpentinite which was intruded by granite on the basis of chemical variations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.99-104
• /
• 2003

This paper described the general dynamic point for rotor design and the design procedure of low vibration blade. Generally, rotor rotating natural frequencies are determined to minimize hub loads, blade vibration and to suppress ground resonance at rotor design stage. First, through rotor frequency diagram, natural frequencies must be far away from resonance point and rotating loads generated from blade can be transformed to non-rotating load to predict fuselage vibration. Vibration level was predicted at each forward flight condition by calculating cockpit's vertical acceleration transferred from non-rotating hub load assuming a fuselage as a rigid body. This design method is applied to design current Next-generation Rotor System Blade(NRSB) and will be applied to New Rotor which will be developed Further.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.1
• /
• pp.7-29
• /
• 1986

The food used in the royal palace of Chosun dynasty(朝鮮王朝) are viewed from various aspects of the dishes for ordinary meal, royal banquet, reception for the foreign representatives, wedding feast, and ancestral rites. Unfortunately most of knowledge on the food used in the royal palace is not accurate as it had been delivered orally and includes only that of the late Chosun dynasty era. Accordingly more accurate knowledge on its historical change could be illustrated by the ancient literature, including uigue(full account, 儀軌), dungrok(memorandum, 膳錄) or balgi(list, 件記). Though it is different from the preparation of King´s dinner table in kitchen, the uigue on ordinary meal, while King Jungcho(正祖) and his troupe visited the Hwasung(華城) has been handed down as the literature on the ordinary meal of the royal palace. Twenty seven kinds of uigue and dungrok on royal banquet for a celebration, from the 45th year of Sook Jong(肅宗, 1715) to the 6th year of Kwang Moo(光武, 1902), remain & reveal the change of features on dishes and food materials for royal banquet. Twenty kinds of uigue and dungrok on foods for reception of Chinese representatives, from the first year of Kwang Hae Koon(光海君, 1609) to the 21st year of Injo(仁祖, 1643), remain and antedate those on foods for royal banquet approximately 100 years. These have been precious materials for historical view on foods used in the royal palace. Twenty kinds of dungrok and uigue of karaedogam(嘉禮都監), in which dishes, food materials, and table setting diagram for dongrae feast (同牢宴) were put on record, remain as the litherature of wedding feast. Wangchosilrok(dynastic record, 王朝實錄) and numerous kinds of uigue have been helpful for study on foods used in ancestral rites. Detailed kinds and cooking procedures of foods for ancestral rites were clearly explained in Taesangji(太常志). A full view on foods used in the royal palace will be reproduced only through analytic study of these ancient litheratures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.133-138
• /
• 2005

Automotive pulleys play a key role in driving the cooling pump, oil pump, air-conditioner and so on by using an engine power. Researches on design processes and technologies of the pulleys can be found in many literatures. On the other hand, the areas related to manufacturing processes of the pulleys have been treated negligently. Vast data extracted from various information systems are transformed, integrated, and summarized to become a special database for helping users make a decision. The database, namely the data warehouse has been popularly used in the marketing and customer management of enterprises and recently applied to improve the design and manufacturing processes. In this study the manufacturing process of pulleys were analyzed through the intensive investigation of shop-floors and the interviews with workers and managers. The defects generated during a manufacturing process were categorized in a few types and the causes of defects examined for extracting the dominant parameters in the setup process for producing pulleys. As the first step to construct the data warehouse for the manufacturing processes of pulleys, authors proposed its architecture focused on the reduction of defect rate during the setup process.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.191-201
• /
• 2008

It has been employed TRANSYT-7F and NETSIM to evaluate the validity and effectiveness of improvement on TSM(Transportation Systems Management). But T7F is hard to describe platoon compression and dispersion in actually, and NETSIM takes a long time for network coding, calibration and have difficulty in setting up saturation flow. While Shockwave Model have advantage which can describe platoon compression and dispersion in actually and shorten hours, convenience of application. But Shockwave Model apply unrealistic traffic flow relation ship(U-K curve) and simplify platoon because of difficulty in calculating shockwave's position and cross. For solving limitation of existing shockwave models, It develop new model with 2-regime linear model, New platoon model, Extended shockwave, etc. For verifying the validity of the proposed model, it was compared with delay of T7F and NETSIM by offset variation. In conclusion, it is thought that proposed model have outstanding performance to simulate traffic phenomenon.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.709-713
• /
• 2016

Grain morphology, phase stability and mechanical properties in binary Ti-Al alloys containing 43-52 mo1% Al have been investigated. Isothermal forging was used to control the grain sizes of these alloys in the range of 5 to $350{\mu}m$. Grain morphology and volume fraction of ${\alpha}_2$ phase were observed by optical metallography and scanning electron microscopy. Compressive properties were evaluated at room temperature, 1070 K, and 1270 K in an argon atmosphere. Work hardening is significant at room temperature, but it hardly took place at 1070 K and 1270 K because of dynamical recrystallization. The grain morphologies were determined as functions of aluminum content and processing conditions. The transus curve of ${\alpha}$ and ${\alpha}+{\gamma}$ shifted more to the aluminum-rich side than was the case in McCullough's phase diagram. Flow stress at room temperature depends strongly on the volume fraction of the ${\alpha}_2$ phase and the grain size, whereas flow stress at 1070 K is insensitive to the alloy composition or the grain size, and flow stress at 1270 K depends mainly on the grain size. The ${\alpha}_2$ phase in the alloys does not increase the proof stress at high temperatures. These observations indicate that improvement of both the proof stress at high temperature and the room temperature ductility should be achieved to obtain slightly Ti-rich TiAl base alloys.