• Title/Summary/Keyword: runoff analysis

Search Result 1,387, Processing Time 0.025 seconds

Accounting for zero flows in probabilistic distributed hydrological modeling for ephemeral catchment (무유출의 고려를 통한 간헐하천 유역에 확률기반의 격자형 수문모형의 구축)

  • Lee, DongGi;Ahn, Kuk-Hyun
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.6
    • /
    • pp.437-450
    • /
    • 2020
  • This study presents a probabilistic distributed hydrological model for Ephemeral catchment, where zero flow often occurs due to the influence of distinct climate characteristics in South Korea. The gridded hydrological model is developed by combining the Sacramento Soil Moisture Accounting Model (SAC-SMA) runoff model with a routing model. In addition, an error model is employed to represent a probabilistic hydrologic model. To be specific, the hydrologic model is coupled with a censoring error model to properly represent the features of ephemeral catchments. The performance of the censoring error model is evaluated by comparing it with the Gaussian error model, which has been utilized in a probabilistic model. We first address the necessity to consider ephemeral catchments through a review of the extensive research conducted over the recent decade. Then, the Yongdam Dam catchment is selected for our study area to confirm the usefulness of the hydrologic model developed in this study. Our results indicate that the use of the censored error model provides more reliable results, although the two models considered in this study perform reliable results. In addition, the Gaussian model delivers many negative flow values, suggesting that it occasionally offers unrealistic estimations in hydrologic modeling. In an in-depth analysis, we find that the efficiency of the censored error model may increase as the frequency of zero flow increases. Finally, we discuss the importance of utilizing the censored error model when the hydrologic model is applied for ephemeral catchments in South Korea.

The Parallelization Effectiveness Analysis of K-DRUM Model (분포형 강우유출모형(K-DRUM)의 병렬화 효과 분석)

  • Chung, Sung-Young;Park, Jin-Hyeog;Hur, Young-Teck;Jung, Kwan-Sue
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.18 no.4
    • /
    • pp.21-30
    • /
    • 2010
  • In this paper, the parallel distributed rainfall runoff model(K-DRUM) using MPI(Message Passing Interface) technique was developed to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The K-DRUM model which is based on GIS can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. The comparison studies were performed with various domain divisions in Namgang Dam watershed in case of typoon 'Ewiniar' at 2006. The numerical simulation using the cluster system was performed to check a parallelization effectiveness increasing the domain divisions from 1 to 25. As a result, the computer memory size reduced and the calculation time was decreased with increase of divided domains. And also, the tool was suggested in order to decreasing the discharge error on each domain connections. The result shows that the calculation and communication times in each domain have to repeats three times at each time steps in order to minimization of discharge error.

Development of Distributed Ecohydrologic Model and Its Application to the Naeseong Creek Basin (분포형 생태수문모형 개발 및 내성천 유역에의 적용)

  • Choi, Daegyu;Kim, In-Hwan;Kim, Jeongsook;Kim, Sangdan
    • Journal of Korea Water Resources Association
    • /
    • v.46 no.11
    • /
    • pp.1053-1067
    • /
    • 2013
  • Distributed ecohydrological model which can simulate hydrological components, vegetation and landsurface temperature using practically available input and observed data with minimum parameters is introduced. This model is designed to properly simulate in area with lack of observed data. Parameter estimation and calibration of the model can be carried out with indirectly estimated data (monthly surface runoff by NRCS-CN method and annual actual vaporization by empirical equation) and remote sensing data (NDVI, LST) instead of observed data. We applied this model in the Naeseong creek basin to evaluate the model validity. Firstly, we found the sensitive parameters which largely influence the simulation results by sensitivity analysis, and then hydrological components, vegetation, land-surface temperature, routed streamflow and water temperature were simulated over 10 years (2001 to 2010) using calibrated parameters. Parameters are estimated by optimization method. It is shown that most of grids are well simulated. In the case of streamflow and water temperature, we checked two observed points in the outlet of watershed and it is shown that streamflow and water temperature are properly simulated as well. Hence, it can be shown that this model properly simulate the hydrological components, vegetation, land-surface temperature, routed streamflow and water temperature as well, even though in despite of using limited input data and minimum parameters.

Analysis of Estimation Technique for Solid Sediments in Combined Sewer Systems (합류식 관거 내 고형물 퇴적량 산정기법 분석)

  • Lee, Jae-Soo
    • Journal of Korea Water Resources Association
    • /
    • v.39 no.5 s.166
    • /
    • pp.405-415
    • /
    • 2006
  • The deposition of sewer solids during dry weather in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. Sewer solid accumulations in drainage systems also create the 'first-flush' phenomena during wet weather runoff periods. In order to solve these problems, measurement of these loadings for a given sewer system for extended period is needed but this task is very difficult and extremely expensive. In this study, generalized procedures for estimating sewer sediment solid during dry weather in combined sewer systems developed by the U. S. Environmental Protection Agency were applied in a drainage system in Korea. As result, the appropriate equation can be selected and applied according to the available data. However, the estimated solid sediment shows considerable difference between methods which classified by model and estimation methods of variable. The estimated values using equations (1) $\sim$ (4) are greater than that of equations (5) $\sim$ (9) and intermediate models show greater values than elaborate or simplest models. The comparison between simulated and measured solid deposition is difficult due to the absent of measurement data, but this estimation method can be used usefully for the management of sewer solid with reduction of cost and effort if the measurement is carried out and the equation is adjusted according to the actual drainage systems in Korea.

Application of RUSLE and MUSLE for Prediction of Soil Loss in Small Mountainous Basin (산지소유역의 토사유실량 예측을 위한 RUSLE와 MUSLE 모형의 적용성 평가)

  • Jung, Yu-Gyeong;Lee, Sang-Won;Lee, Ki-Hwan;Park, Ki-Young;Lee, Heon-Ho
    • Journal of Korean Society of Forest Science
    • /
    • v.103 no.1
    • /
    • pp.98-104
    • /
    • 2014
  • This study aims to predict the amount of soil loss from Mt. Palgong's small basin, by using influence factors derived from related models, including RUSLE and MUSLE models, and verify the validity of the model through a comparative analysis of the predicted values and measured values, and the results are as follows: The amount of soil loss were greatly affected by LS factor. In comparison with the measured value of the amount of total soil loss, the predicted values by the two models (RUSLE and MUSLE), appeared to be higher than those of the measured soil loss. Predicted values by RUSLE were closer to values of measured soil loss than those of MUSLE. However, coefficient of variation of MUSLE were lower, but two model's coefficient of variation in similar partial patterns in the prediction of soil loss. RUSLE and MUSLE, prediction soil loss models, proved to be appropriate for use in small mountainous basin. To improve accuracy of prediction of soil loss models, more effort should be directed to collect more data on rainfall-runoff interaction and continuous studies to find more detailed influence factors to be used in soil loss model such as RUSLE and MUSLE.

Analysis of the Implementation Effect of Total Water Load Management System Using Load Duration Curves in Sapgyo Watershed (부하지속곡선을 이용한 삽교천 유역의 오염총량관리제도 시행효과 분석)

  • Lee, Eunjeong;Kim, Taegeun
    • Journal of Environmental Impact Assessment
    • /
    • v.28 no.6
    • /
    • pp.536-548
    • /
    • 2019
  • In order to quantify the effect of the newly established the Total Water Load Management System in Sapgyo watershed, this study predicted the achievement of the target water quality at each unit watershed and the water quality according to the flow section. The HSPF model, which is the watershed runoff model, was constructed and operated based on 2015, and the water quality was predicted by inputting the loads in final target year(2030). The Load Duration Curve (LDC) was created using the simulated results of base year and target year. As a result of plotting water quality by flow conditions, it was simulated to be close to the BOD target with a difference of 0.1 ~ 0.2 mg/L in all three watersheds during the mid-range flow interval (40 ~ 60%). In case of T-P, although the target water quality was not set, the water quality was improved by Cheonan A 46%, Kokgyo A 29% and Namwon A 25%. The Muhan and Sapgyo river basins meet the target grade of middle-watershed standards. The improvement effect will be positive, as water quality, which achieves the target of Total Load Management System and the target grade of the middle-watershed standards will be expected to flow into the Sapgyo lake.

A Research on a Revised Application of Unit Hydrograph Variant According to Rainfall Intensity in a Rainstorm (호우사상의 강우강도에 변동하는 단위유량도의 보완적 적용에 관한 고찰)

  • Yoo, Ju-Hwan
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.1
    • /
    • pp.41-49
    • /
    • 2011
  • This study is a research based on an existing analysis that peak values of unit hydrograph are variant according to rainfall intensity in a watershed. Differently from the fundamental assumption that an unit hydrograph is time-invariant in a watershed a variant unit hydrograph to rainfall intensity by storms is defined and applied into rainfall events, which produces out runoff hydrograph for an examination. Peak flow and time to peak of unit hydrograph used for an application are obtained from the relation equation with rainfall intensity developed by a previous study reviewed, and its shape is made by Nash unit hydrograph which is determined by the peak values. For the purpose of a comparison an invariant unit hydrograph is defined as Nash model obtained from averaged peak values of unit hydrograph which is derived by 26 rainfall storms. Peak flow and time to peak of flood hydrograph developed respectively by variant unit hydrograph with rainfall intensity and an averaged unit hydrograph are compared to those of the observed hydrograph. With comparing both hydrographs calculated by averaged unit hydrograph and revised unit hydrograph to observed hydrograph it is shown the peak flow and time to peak of hydrograph calculated by time-invariant unit hydrograph revised in this study are closer to those of observed hydrograph than those calculated by averaged unit hydrograph.

Application of MPI Technique for Distributed Rainfall-Runoff Model (분포형 강우유출모형 병렬화 처리기법 적용)

  • Chung, Sung-Young;Park, Jin-Hyeog;Hur, Young-Teck;Jung, Kwan-Sue
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.8
    • /
    • pp.747-755
    • /
    • 2010
  • Distributed Models have relative weak points due to the amount of computer memory and calculation time required for calculating water flow using a numerical analysis based on kinematic wave theory when compared to the conceptual models used so far. Typically, the distributed models have been mainly applied to small basins. It was necessary to decrease the resolution of the grid to make it applicable for large scale watersheds, and because it would take up too much time to calculate using a higher resolution. That has been one of the more difficult factors in applying the model for actual work. In this paper, MPI (Message Passing Interface) technique was applied to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The comparison studies were performed a single domain and a divided small domain in Yongdam Dam watershed in case of typoon 'Ewiniar' at 2006. They were compared to analyze the application effects of parallelization technique. As a result, a maximum of 10 times the amount of calculation time was saved but keeping the level of quality for discharge by using parallelization code rather than a single processor.

Application of K-BASINRR developed for Continuous Rainfall Runoff Analysis to Yongdam Dam Test Bed (장기유출해석을 위하여 개발된 K-BASINRR의 용담댐 시험유역 적용)

  • Kim, Yeonsu;Jung, Ji Young;Noh, Joonwoo;Kim, Sung Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.211-211
    • /
    • 2017
  • 장기유출해석 모델은 수자원의 안정적인 확보와 이용, 유역단위 기초자료 조사관리 등을 위하여 수자원 장기종합계획 및 전국유역조사사업 등에 활용되고 있다. 주로 국외에서 개발된 모형이 활용되고 있어, 국내의 여건에 맞추어 편의성이 개선된 모형을 찾는 것은 매우 어려운 일이다. 또한, 유출해석을 수행하기에 앞서 지속적으로 업데이트된 모델에 대한 객관적인 평가를 수행한 사례는 드물다. 따라서, 본 연구에서는 국내에서 주로 활용되고 있는 장기유출해석모델(TANK, SWAT, SSARR, PRMS 등)에 대한 비교검토를 토대로 각종 사업과의 연계성, 계산의 효율성, 정확도 등을 고려하여 USGS에서 개발한 PRMS v.4.0.2를 기반으로 국내유역에 활용이 가능하도록 개선한 $K-BASIN^{RR}$ 및 입력자료 전처리기를 개발하였다. PRMS 모형은 융설 및 지하수 흐름 등 다양한 기능을 포함하여 강우유출 분석에 활용성 높은 모형으로 평가받고 있으나, 국내 OS환경 및 활용 단위계에서 활용성이 떨어지는 단점이 있다. 본 연구에서는 소스코드 개선 및 GUI구축을 통하여 PC 환경에서 구동이 쉽도록 재구성하였고, 사용자 편의성 확보를 위한 입력자료 전처리기를 개발함으로써 수자원단위지도 3.0, 임상도 재분류 테이블, 토양도 재분류 테이블의 DB화 및 모형의 구동을 위한 HRU분할, 입력자료 생성이 가능하도록 하였다. 매개변수 최적화를 위하여 하천 유량뿐만 아니라 기저유출량을 대상으로 Monte-Carlo 시뮬레이션 기반의 매개변수를 최적화 기능을 탑재하였다. 개발된 모형의 적용성 평가를 위하여 용담댐 시험유역을 대상으로 11년 간(2005-2015)의 강우 및 온도자료를 입력자료로 활용하여 모의한 결과 샘플의 개수에 따라 NSE(Nash-Sutcliffe Efficiency)를 0.9까지 추정이 가능함을 파악하였다. 또한, 유출량과 기저유출에 대하여 동시에 최적화를 수행하는 경우 NSE를 유출량에 대하여 0.8, 기저유출량에 대하여 0.6까지 추정이 가능하였다. 최적화된 모의 결과에 대한 검토를 위하여 계산증발산량을 측정증발산량과 비교한 결과, 유사한 패턴을 나타내는 것을 확인할 수 있었다. 본 연구에서 개발한 $K-BASIN^{RR}$을 활용하는 경우 장기유출해석 업무에 효율성 및 정확도를 향상할 수 있을 것으로 판단된다.

  • PDF

Analysis of storm effects on floods using runoff coefficient (유출계수를 이용한 호우가 홍수에 미치는 영향 분석)

  • Kim, Nam Won;Shin, Mun-Ju
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.265-265
    • /
    • 2016
  • 호우가 홍수에 미치는 영향의 분석은 수문현상을 이해하고 수공구조물을 설계하는데 반드시 필요한 절차이다. 호우가 홍수에 미치는 영향을 분석하기 위해서 독립된 소유역부터 비독립된 대유역까지 홍수량을 계산하고 그 상관성을 이해해야 하지만 상류쪽의 소유역의 경우 관측자료의 부재가 빈번하여 이러한 전반적인 분석이 쉽지 않다. 그리고 소유역과 대유역의 홍수특성을 연관지어 분석하기 위해서는 비교가능한 홍수특성을 추출해야 하며 이러한 일관된 잣대를 사용한 홍수분석은 중요하다. 본 연구에서는 소유역의 자료부재를 보완하기 위해 자료공간확장 방법을 제안하고 이를 통하여 안동댐 유역내 총 50개 지점의 홍수 시계열자료를 생성하였다. 자료공간확장 방법으로써, 안동댐유역의 1989년부터 2009년까지의 자료의 질이 좋은 20개의 사상을 추출하였고 안동댐유역 내에 위치한 안동댐, 도산, 소천의 수위관측지점의 관측유량자료에 대해 분포형 모형인 GRM 모형의 매개변수를 시행착오법으로 동시에 보정하여 한 개셋의 최적 매개변수를 추정하였다. 이때 모의결과를 평가하기 위하여 Nash-Sutcliffe (NS) 계수를 사용하였으며 20갯 사상의 세군데 관측수위지점에 대해서 모의결과가 전반적으로 0.5 NS 계수 이상으로써 만족할 만한 결과를 얻었다. 이 추정된 매개변수는 47개의 추가적인 관심지점의 유출모의에 사용되었으며 이렇게 모의된 유출시계열 자료는 관측시계열 자료로 가정하여 사용하였다. 이렇게 공간확장되어 생성된 시계열 자료는 이동평균방법을 사용하여 홍수강도-지속시간 곡선으로 변환되었고 50개 유역의 평균강우량 시계열 자료 또한 같은 밥법을 사용하여 강우강도-지속시간 곡선으로 변환되었다. 50개 유역의 비교가능한 일관된 홍수특성을 추출하기 위해 비유량법의 유출계수를 계산하였다. 유출계수를 계산하기 위해 유역별 도달시간을 계산하였으며 이 도달시간에 해당하는 강우강도를 추출하였다. 그리고 유역별 첨두 홍수강도를 유역별 도달시간에 해당하는 강우강도로 나눠줌으로써 유역별 유출계수를 계산하였고 이 유출계수를 유역면적에 대해 도시함으로써 그 경향을 조사하였다. 조사 결과 유역면적이 $100km^2$ 이상으로써 상류에서 하류방향으로 유역이 중첩되면서 증가하는 비독립적인 유역들의 경우 유역면적이 증가함에 따라 유출계수가 작아지거나 커지는 어떠한 경향을 보였다. 하지만 유역면적이 $100km^2$ 이하로써 독립적인 소유역의 경우 유역면적이 증가함에 따라 유출계수는 무작위로 분포되었다. 이것은 비독립적인 유역의 경우에는 호우가 홍수에 어떠한 일관된 영향을 미치나 각각 독립된 소유역의 경우에는 일관된 영향을 미치지 않음으로써 지역화방법에 의한 독립된 인근 미계측유역의 유출추정은 그 신뢰성이 높지 않다는 것을 의미한다.

  • PDF