• Title/Summary/Keyword: run-up height

Search Result 93, Processing Time 0.03 seconds

Experimental study on Run-up of S-berm-Typed Rubble Mound Breakwaters (S-소단 경사식 방파제에서의 처오름에 대한 실험연구)

  • Ahn, Tae-Jun;Park, Seung-Hyuun;Jang, Won-Jae;Cho, Yong-Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1919-1924
    • /
    • 2006
  • In this study, the run-up of water waves on slopes of s-berm breakwaters was investigated by performing a series of hydraulic experiments. The run-up height was analyzed in detail by using the effects of wave steepness and surf similarity parameter. In general, the run-up heights were decreased as the height and the width of berm were increased. However, the variation of run-up height was small for change of wave steepness and surf similarity parameter.

  • PDF

Determination of Wave Run-up Height on S-berm Breakwater (복합사면에서의 도파고 산정)

  • 유동훈;이대석
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.13 no.3
    • /
    • pp.202-208
    • /
    • 2001
  • Explicit approximation has been developed to estimate the run-up height on S-berm breakwater on the basis of Saville's hypothetical slope method. For the explicit expression of run-up height several relations are developed to represent the ratio of run-up height against breakwater slope with various conditions of water depth and wave steepness. For the verification of explicit approximation the results are compared with Saville's measurement data and simple expression of Delft Hydraulic Laboratory.

  • PDF

Empirical Equation of Wave Run-up Height (도파고 경험식)

  • Yoo Dong Hoon;Kim In Ho
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.16 no.4
    • /
    • pp.233-240
    • /
    • 2004
  • For the development of empirical equation of run-up height, a new surf parameter called' wave action slope' $S_x$ is introduced. Approximate equation has been produced for each band of water depth for the computation of wave run-up height using the laboratory graph of Saville(1958). On the other hand using the laboratory data of Ahrens(1988) and Mase(1989), empirical equations of run-up height have been developed for the general application with considering roughness effect covering a wide range of water depth and wall slope. When Mase tried to relate the run-up height to the Iribarren number, nonlinear relation has been obtained and hence the empirical equation has a power law. But when the wave action slope is adopted as a major factor for the estimation of run-up height the empirical equation shows a linear relationship with very good correlation for the wide range of water depth and wall slope.

Effect of hydraulic and structural parameters on the wave run-up over the berm breakwaters

  • Milanian, Farzad;Niri, Mahmood Zakeri;Najafi-Jilani, Ataollah
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.9 no.3
    • /
    • pp.282-291
    • /
    • 2017
  • The main aim of this study is to investigate the effect of berm breakwater on wave run-up. A total of 200 numerical analysis tests have been carried out in this paper to investigate the effect of berm width, wave height, and wave period on the wave run-up, using an integrating technique of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD). Direct application of Navier Stokes equations within the berm width has been used to provide a more reliable approach for studying the wave run-up over berm breakwaters. A well tested Reynolds-averaged Navier-Stokes (RANS) code with the Volume of Fluid (VOF) scheme was adopted for numerical computations. The computational results were compared with theoretical data to validate the model outputs. Numerical results showed that the simulation method can provide accurate estimations for wave run-up over berm breakwaters. It was found that the wave run-up may be decreased by increasing the berm width up to about 36 percent. Furthermore, the wave run-up may increase by increasing the wave height and wave period up to about 53 and 36 percent, respectively. These results may convince the engineers to use this model for design of berm breakwater in actual scale by calculating the Reynolds numbers.

Experimental study on Run-up of S-berm-Typed Rubble Mound Breakwaters (S-소단 경사식 방파제에서의 처오름에 대한 실험연구)

  • Ahn, Tae-Jun;Kim, Young-Taek;Park, Seung-Hyun;Cho, Yong-Sik
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.18 no.2
    • /
    • pp.147-153
    • /
    • 2006
  • In this study, the run-up of water waves on slopes of s-berm breakwaters was investigated by performing a series of hydraulic experiments. The run-up height was analyzed in detail by using the effects of wave steepness and surf similarity parameter. In general, the run-up heights were decreased as the height and the width of berm were increased. However, the variation of run-up height was small for change of wave steepness and surf similarity parameter.

A Study of Matimum Run-up Heights of Periodic Waves (주기파의 최대 처오름높이에 관한 연구)

  • Jo, Yong-Sik;Lee, Bong-Hui
    • Journal of Korea Water Resources Association
    • /
    • v.32 no.6
    • /
    • pp.649-655
    • /
    • 1999
  • The maximum run-up heights of periodic waves are numerically investigated in this study. Incident waves are sinusoidal and enoidal waves. The maximum run-up height of enoidal wave approaches that of sinusoidal wave as the wave length decreases, while it approaches that of solitary wave as the wave length increases. If wave height is fixed, the maximum run up heights of enoidal waves are always greater than those of sinusoidal waves but smaller than those of solitary waves.

  • PDF

Numerical Study on Wave Run-up of a Circular Cylinder with Various Diffraction Parameters and Body Drafts

  • Jeong, Ho-Jin;Koo, Weoncheol;Kim, Sung-Jae
    • Journal of Ocean Engineering and Technology
    • /
    • v.34 no.4
    • /
    • pp.245-252
    • /
    • 2020
  • Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.

Calculation of Run-up Height on a Conical island with Variable Transverse Lengths of Incident Waves (입사파폭에 따른 원추형 섬에서의 처오름높이 계산)

  • Jo, Yong-Sik
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.4
    • /
    • pp.449-457
    • /
    • 1998
  • Using a numerical model solving the shallow-water equations, unusual huge run-up heights observed in the lees of both Babi and Okushiri islands were investigated in detail. The effects of incident tsunami widths were particularly examined by adjusting the transverse length of the wave-maker in laboratory and numerical experiments. The calculated run-up heights were compared with the laboratory experimental data. It has been found that the run-up heights in the lee of a conical island are strongly dependent on the ratio of a transverse length of incident tsuanmis to a base diameter of the island. Keywords : shallow-water equations, tsunami, run-up height, conical island.

  • PDF

Wave Run-up and Reflection on Slopes of S-berm Breakwaters Armored with Tetrapods (테트라포드를 이용한 S-berm 경사식 방파제의 처오름과 반사)

  • Ahn, Tae-Jun;Lee, Seung-Hyeob;Cho, Yong-Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1078-1082
    • /
    • 2005
  • In this study, the run-up height and reflection property on slopes of S-berm and smooth slopes breakwaters are investigated by laboratory experiment. The run-up height analyzed the effect of reflection coefficient, surf similarity parameter. Measured reflection coefficients of smooth slope breakwaters are compared with those of S-berm breakwater with variable widths. In general, measured coefficients of S-berm breakwaters are smaller than those of smooth slope breakwaters.

  • PDF

Characteristics of Run-up Height over Sandy Beach with Submerged Breakwaters ; PART II - Effect of Shape of Submerged Breakwaters (잠제 설치 연안의 처오름 높이 특성 ; PART II - 잠제의 제원에 의한 영향)

  • Hur, Dong-Soo;Lee, Woo-Dong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.4B
    • /
    • pp.429-439
    • /
    • 2008
  • The purpose of this study is to examine the characteristics of run-up height over sandy beach due to the shape of submerged breakwater. For the discussion on it in detail, 3-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly interaction of Wave Structure Sandy beach (hereafter, LES-WASS-3D; Hur and Lee, 2007) has been used to simulate run-up height over sandy beach as well as wave field around submerged breakwaters. Using the results obtained from numerical simulation, the effects of the shape of submerged breakwaters (crown height, crown width, crown length and submerged breakwater's slope gradient) on run-up height over sandy beach have been discussed related to the wave height distribution and characteristics of up-layer flow around ones.