• Journal of Korea Trade
• /
• 제23권6호
• /
• pp.1-13
• /
• 2019

Purpose - This study deals with a strategic plan for meeting the value added criteria effectively, which is one of the methods of determining origin used in preferential trade such as FTA. Automobile products, one of the major Korean export items, were selected to give a practical use against the FTA requirements. Design/methodology - This study is based on the value-added criteria of the Korea-US and Korea-EU FTAs that apply various value-added criteria. The Korea-US FTA adopts the RVC method based on the integration, deduction and net cost methods, while the MC method is employed in the Korea-EU FTA. The methodology used in this work is an extended literature review, analysis of the value-added criteria applied to automobile products under Korea-US and Korea-EU FTA with some secondary statistics. Findings - Based on in - depth analysis of the value - added criteria requirements for automobile products stipulated in the Korea - US FTA and the Korea - EU FTA, two strategic considerations are suggested. First is 'appropriate value-added strategy' and the second is 'strategy of changing production and trade structure'. The second strategy is a bit used in Korea but this is not considered best if the first strategy is ignored or forgotten. The second one is meaningful when this becomes inevitable. Research limitations/implications - This study is primarily designed to assist Korean auto mobile industry players exporting to EU and USA but this may help to auto part or material producers in FTA counter party territories being EU or USA as the preferential tariffs are applied on a inter region basis. A further research other than auto mobiles using other major FTAs might be followed later. Originality/value - There has been so far little research on strategic factors to meet the value-added origin requirements. This study, therefore, is expected to contribute facilitating the decision of FTA origin and to improve the utilization of FTA by allowing exporting companies using value added criterion to more smoothly meet origin requirements. This will also enable the tax authorities to utilize the value-added criterion to validate effectively the origin of imports where preferential tariffs are applied.

• 정보처리학회논문지D
• /
• 제18D권6호
• /
• pp.433-442
• /
• 2011

소프트웨어의 규모가 커지고 다양해짐에 따라 고객이 원하는 요구사항을 정확하게 이해하여 표현하는 것의 중요성이 강조되고 있다. 특히 개발 초기에 요구사항은 추상적이고 개념적이기 때문에 핵심적인 시스템의 요구사항을 도출해서 명세하는 작업은 쉬운 일이 아니다. 기술적인 측면에서 이론적으로 다양한 분석과 검증기법이 소개되고 있지만 실무적으로는 요구사항을 명확하게 도출하기 힘들다. 본 논문에서는 고객이 원하는 요구사항을 명확하게 도출하기 위해, 텍스트언어학(textlinguistics)의 거시구조 개념을 이용한다. 먼저, 서술적으로 명세 된 요구사항을 텍스트언어학(textlinguistics)의 거시구조로 분석하였고 다음으로 거시규칙을 적용하여 거시명제를 도출하여 요구사항을 명확히 정의하도록 하였다. 마지막으로 도출된 거시명제를 이용하여 Use-case Model로 문서화하는 방법을 제시하도록 한다.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.39-46
• /
• 2007

In this paper we discuss the problems related with the existing electrical safety system that is influenced by all the socio-technical factors including the electrical safety law, government organizations, and their practicing rules and regulations. Sometimes intangible practices also affect the safety issues. It is our intention to incorporate all those factors effectively and systematically in improving the electrical safety system. Since, the problem in nature is so complex, an approach based on the systems engineering (SE) method could be a good candidate. Specifically, as a first step of the SE process we performed the requirements analysis of all the factors mentioned above and some recommendations from the experts in the field. In the work environment utilizing a computer-aided SE tool, the requirements are verified and managed efficiently although the data base is complicated in general in tracking the changes. Next, by analyzing the verified requirements, a functional architecture is developed to achieve an improved electrical safety system. We also did the reverse engineering of the existing electrical safety system to explore potential problems there. The result can also help improve the existing one. Overall, a systematic approach to constructing electrical safety system based on SE is proposed for the first time in this paper. Note that the method described here can be adopted in the study of other safety systems.

• 소성∙가공
• /
• 제7권3호
• /
• pp.246-259
• /
• 1998

This paper describes a research work of developing a computer-aided design and manufacturing of irregular shaped sheet metal product for blanking or piercing and bending operations. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories experimental results and the empirical knowledge of field experts, This system has been written in AutoLISp on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules which are input and shape treatment, flat pattern-layout, pro-processor module. Based on the knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product complexities of blank geometry and punch profile sheet metal to give flat pattern and automatically account for the adjustment of bending allowances to match tooling requirements by checking dimensions and generating NC data automatically according to drawings of die-layout module. Results carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing and bending die in this field.

• 무역상무연구
• /
• 제69권
• /
• pp.473-493
• /
• 2016

If a certain country or an arbitration institution hopes to keep ahead of the fierce competition in the international arbitration market, it needs to develop hardware factors, such as i) Facility and Infra, ii) Geographical Location, iii) Professional Staff, iv) Global Network, v) Capital, and vi) Arbitrators & Practitioners etc., along with software factors including i) Arbitration Rules of Law, ii) Court's Support, iii) International Convention, iv) Political Risk, and v) Education Environment, which are the most critical requirements in the development strategy for international arbitration. Having perceived the above situation, the Korean government has been working on amending the Korean Arbitration Act to reflect global advanced practice of international arbitration, and seeking to enact laws that will promote our arbitration industry and create a more arbitration-friendly environment. The KCAB is also currently revising both the domestic and international arbitration rules in accordance with these national efforts. Under these circumstances, this paper examines how major leading international arbitration institutions manage their secretariats and suggests how the KCAB can compose and manage its Secretariat to gain a competitive advantage over rival institutions.

• 한국항해학회지
• /
• 제19권4호
• /
• pp.9-40
• /
• 1995

Since Korean Seamen Act(herein after called "the Act") has been legislated in 1962, an amendment of the Act has duly performed several times in order to meet an essential guideline of appropriate international convention and practical requirement of domestic labour movement. As the Act in many area, is based on the application of international convention and regulations, it has been considered essential to call attention to such international rules, to emphasize their importance, and to indicate how and to what extent they may be incorporated in national law, in accordance with national constitutional rules and requirements. Of newly amended act in 1991, it could, however, not fully reflect an adequate and modern labour standard as a guideline of the convention. Therefore, a principal objective of this paper is to provide a comprehensive reference work to assist amending up-to-data seamen act against the Act. The guidelines, however, do not attempt to suggest or formulate a legislative programme, but rather provide an ordered and specific content corresponding to international convention adopted by ILO. Consequentially, these guidelines aim to direct the reader and legislator toward the sources and contents of what has come to constitute an international code of maritime labour standards. The guidelines described herein may also serve as a specific arrangement to the various kinds of legal aspects to be regulated through reasonable future amendment under amicable agreement between interesting parties.g parties.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.475-475
• /
• 2009

Recent alarming acceleration of global warming has made power generations using renewable energy to be in the middle of the spotlight. Korean government has also announced that it will make the related industry to be nation's one of main export items with high investments to low carbon green growth industry. To achieve this goal of exporting the renewable energy power generation system beyond domestic use, internationally acceptable rules should be applied and the three step processes of design, performance assessment and certification should follow international standards. Corresponding this international requests, IEC(International Electrotechnical Commission) is conducting the establishment of rules in TC88 for technical requirements of wind turbines. Design life-time of a wind turbine is required to be at least 20 years. In the meantime, the wind turbine will experience a lot of load cases such as extreme loads and fatigue loads which will include several typhoons per year and extreme gusts with 50 years recurrence period as well as endless turbulence flow. Therefore, IEC 61400-1 specifies design load cases to be considered in the wind turbine design and requires the wind turbine to withstand the load cases in various operational situations. It thus appears that the examination of contents and decisions discussed in the international standard committee will help people in the field of offshore wind energy and ocean energy converters.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 1996년도 10월 학술대회지
• /
• pp.245-245
• /
• 1996

When language A borrows words, it borrows them according to its own phonetic rules. In other words, language B, where borrowed words coming from, has to comply with the phonetic requirements of language A. It may be added that language A only borrows the elements, the types of syllables and accentuation that already exist in its own phonetic struture and rejects all the rest that are not compatible. It operates exactly like a sieve. That is why borrowed words offer an excellent observation post to notice how react in phonetic contexts. The Japanese language has borrowed and is borrowing extensively from other languages and cultures, mainly from the English ones in the fields of sports, medicine, industry, commerce, and natural sciences. Relatively very few new words are created using the ancient Chinese or native backgrounds. This presentation will look for the rules of borrowing and try to show that this way of borrowing represents an organized system of its own. Three levels would be particularly studied : - the phonemic level - the syllable level and - the accentual level. This last point would be specially targeted with the question of syllable tension-relaxation. Such a study of languages in phonetics contacts could shed some new light on the phonetic charaCteristics of Japanese language and will confirm or weaken some conclusion already demonstated otherwise. We will be aming specially at the endings of the borrowed words where, it seems, Japanese language manifests itself very strongly.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.10-20
• /
• 2020

This paper presents a method to measure the similarity of assigned jobs in the gravure printing operation based on the chromaticity and color sequence, and order the jobs accordingly. The proposed dispatching rule can be used to fulfill diverse manufacturing site requirements because the parameters can be adjusted to prioritize chromaticity and color sequence. In general, dispatching rules either ignore the job-changing time or require that the time be clearly defined. However, in the gravure printing operation targeted in this study, it is difficult to apply the general dispatching rule because of the difficulties in quantifying the job-changing time. Therefore, we propose a method for generalizing assignment rules of the job planner, allocating relative similarity among assigned jobs, and determining the sequence of jobs accordingly. Chromaticity priority is determined by the arrangement of the color assignments in the printing operation; color sequence priority is determined by the addition, deletion, or change in a specific color sequence. Finally, the job similarity is determined by the dot product of the chromaticity and color sequence priorities. Implementation of the proposed dispatching rule at an actual manufacturing site showed the planner present the same job order as that obtained using the proposed rule. Therefore, this rule is expected to be useful in industrial sites where clear quantification of the job-changing time is not possible.