• 한국해양공학회지
• /
• 제18권1호
• /
• pp.16-21
• /
• 2004

In general, core materials of rubble mound breakwater are used at a restricted range of 0.015㎥～0.03㎥. However, it is not satisfied with the standard design in over fifty percent of the cases. In this study, model tests and numerical analysis are employed to examine the range of core material that has no problem with capacity maintenance and stability of rubble mound breakwater. Model tests measure the porosities that are mixed in various ratios, to classify core materials by three parameters. The slope stability of rubble mound breakwater is investigated, using numerical analysis, with a friction angle and a unit weight. The change of unit weight, which is followed by the mixed rate of size core material, has no large affect on slope stability, and there is no problem with ensuring slope stability of the rubble mound breakwater.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• 산업기술연구
• /
• 제21권B호
• /
• pp.163-174
• /
• 2001

A dynamic reliability model for analyzing the stability of armor units on rubble-mound breakwater is mathematically developed by using Hudson's formula and definition of single-failure mode. The probability density functions of resistance and loading functions are defined properly, the related parameters to those probability density functions are also estimated straightforwardly by the first-order analysis. It is found that probabilities of failure for the stability of armor units on rubble-mound breakwater are continuously increased as the service periods are elapsed, because of the occurrence of repeated loading of random magnitude by which the resistance may be deteriorated. In particular, the factor of safety is incorporated into the dynamic reliability model in order to evaluate the probability of failure as a function of factor of safety. It may thus be possible to take some informations for optimal design as well as managements and repairs of armor units on rubble-mound breakwater from the dynamic reliability analyses.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.16-22
• /
• 2003

In this paper, the method of determining the economically-optimal design section of rubble mound breakwater, using ADS program, was studied to supplement the deterministic approach. First of all, the design waves are computed, according to the return periods, using the Weibull distribution from the data of waves at the location of the breakwater. In order to take an optimal section, according to the return periods, the ADS program was used. The restriction conditions and objective functions are decided from the references of the specifications and standard manuals for Coastal and Harbor Construction Work. Results from this study support the ADS program as an appropriate method for determining the economically-optimal section of rubble mound breakwater, comparing the construction costs and the initial and damage repair costs for its life time.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.120-126
• /
• 2004

The failure modes analysis by the real process method at the head section of rubble mound breakwaters is more important than other failure modes analysis. because this initial failure modes and failure process will lead to the destruction of the structure. The three-dimensional failure modes are discussed using the experimental data with directional waves considering the failure modes. It was processed step by step failure around the head of rubble mound breakwaters. The spacial characteristics of failure mode by real process analysis was well descript at the rubble mound structures.

• 한국지반공학회논문집
• /
• 제34권3호
• /
• pp.13-27
• /
• 2018

사석경사식 방파제의 안정성에 있어 파랑에 의한 사석마운드내의 침투흐름의 영향이 연구되었다. 침투흐름은 일반적으로 태풍시 방파제 주변 수위차에 의해 발생된다. 기존 사석마운드의 안정해석법은 정적해석으로 활동면 상의자중(콘크리트블록, 사석, 필터, 보호층)에 의한 수직력과 콘크리트 블록에 작용하는 파압에 의한 수평력(Goda 식으로 산정)의 힘의 평형조건으로 결정된다. 그러나 이 정적방법은 사석마운드 내의 파랑에 의한 침투흐름을 고려할 수 없다. 이런 침투흐름은 사석마운드의 안정성을 감소시킬 수 있다. 본 연구에서는 침투 작용시 사석경사식 방파제의 안정성에 대해 CFD 프로그램(OpenFOAM)과 한계평형해석법(GeoStudio)을 이용하여 검토하였다. 수치해석결과 침투로 인해 사석경사식 방파제의 안정성이 감소하는 것으로 나타났다. 또한 수치해석 결과는 사석마운드의 안정성이 시간에 따라 변하는 것을 보여주었다. 특히 파가 방파제를 월류하고 침투류에 의해 상치콘크리트 측면과 하부에 강한 양압력과 사석마운드 내부에 간극수압이 크게 발생하는 시점에 가장 불안정 상태를 보이는 것으로 나타났다. 따라서 동적 파랑에 의한 침투류의 영향을 고려한 동적해석도 정적해석과 함께 검토할 필요가 있다.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.23-31
• /
• 2003

As there are so many uncertainties associated with using the determinism analysis method in the design of rubble mound breakwater, it is impossible for a designed construction to provide ultimate stability. First of all, due to the uncertainty of Load and Resistance, a safety level concerning the destruction mode of construction must be given. Then, the optimization design should be processed. After all, we can say that it is a more reasonable design method than the design used by the stability rate. In this study, an established design process is accomplished using Hudson's equation and an economic analysis with the breakwater's section is also conducted. Hudson's equation is compared to Van der Meer's equation. These results are utilized to drop a damage rate, increase the stability of construction, and determine the optimization section of the breakwater.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.55-70
• /
• 2013

A composite breakwater with an upper horizontal porous plate and a lower rubble mound is proposed and studied in this work. By means of matched eigenfunction expansions, a semi-analytical solution is developed for analyzing the hydrodynamic performance of the breakwater. The semi-analytical solution is verified by known solutions for special cases and an independently developed multi-domain boundary element method solution. Numerical examples are given to examine the reflection, transmission and energy loss coefficients of the breakwater and the wave force acting on the horizontal porous plate. Some useful results are presented for engineering applications.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 2003

The Sectional and Spatial failure modes are discussed using the experimental data with long crest wave and multi-directional waves considering the failure modes occurring around the rubble-mound breakwater. The spatial & sectional stability and failure mode around the rubble-mound structures with construction progress can be summarized as follows: 1) The rubble mound structures at basic construction step was occurred serious failures when ${\xi}$ was about 6.5. 2) It was clarified that the failure modes at the round head of detached breakwater are classified as failure by plunging breaking on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached break water. 3) The failure mode was found in the lower wave height than the design wave by the breaker depth effect. 4) The failure on the slope were also developed at the lee side of the round head because diffracted wave propagated into the behind area by grouping effect of multi-directional irregular wave.

• 한국해안·해양공학회논문집
• /
• 제20권4호
• /
• pp.413-420
• /
• 2008

파랑하중은 연약지반을 굴착 치환시킨 후에 축조된 사석경사식 방파제의 안정에 직접적인 영향을 주는 요소이다. 특히 일부 침하를 허용하는 굴착치환 사석경사 방파제에서 침하를 유발하는 주요인으로 지목되었으나, 설계 시 파랑하중에 의한 방파제의 침하에 대한 영향을 검토하여 반영하는 사례가 전무한 상태이다. 따라서 본 연구에서는 파랑하중에 의한 방파제 침하의 영향을 설계에 직접 반영할 수 있도록 수치모형실험을 실시하여 방파제 침하량을 계산한 후 현장계측자료와 비교하였다. 계산값과 실측값은 양호한 일치를 보이는 것으로 나타났다.