• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.191-201
• /
• 2021

In this study, an eco-friendly indigo reduction system(scale up reduction, use of buffer solution, and pH control) using baker's yeast(Saccharomyces cerevisiae) was applied for natural indigo(Polygonum tinctorium) dyeing of Hanji fabric and Hanji-mixture fabric(Hanji/Cotton, Hanji/Silk). The effect of concentration of baker's yeast, repeat dyeing, and bath reuse was investigated in terms of dye uptake indicating reduction power. And the oxidation-reduction potential(ORP) was monitored. We also evaluated color properties and colorfastness according to the color strength. The yeast concentration did not significantly affect the maximum reduction power. However, the highest yeast concentration was effective in improving the initial dye uptake, and its the reduction retention power was the most excellent. Even on the last reduction day, the effect of increasing the dye uptake by repeat dyeing was observed. And it was confirmed that the reduction bath could be reused for up to 30 days by supplementing yeast at the end of reduction. For all the fabrics used, deeper and darker PB color were obtained by repeat dyeing. As dyeing was repeated, purplish tint got stronger on the Hanji/Silk fabric compared to other fabrics. Regardless of the composition of Hanji fabrics and color strength, washing and dry cleaning fastness were relatively good with above rating 4-5, and fastness to rubbing and light were acceptable with a rating 3-4 ~ 4-5. The eco-friendly natural indigo dyeing process using niram and baker's yeast would offer global marketability and diversity of Hanji product as a sustainable high value-added material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.508-517
• /
• 2010

One-step reduction/dyeing method was optimized for wool dyeing with natural indigo dye in this study. The effects of reduction/dyeing conditions including dye temperature and time, the pH of bath, concentration of dye, and reducing agent on dye uptake and color were investigated. The dye uptake was higher with no addition of alkali. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at $60^{\circ}C$ for 30min and the dyed fabrics appeared in the PB Munsell color range. Dye uptake improved with the increase of a natural indigo dye concentration with the same sodium hydrosulfite concentration. At a higher dye uptake, the fabric color became more purplish and the maximum absorption shifted from 660nm to 620nm. Color reproducibility was reliable with a color difference in the range of 0.41~1.43. Regardless of color strength, washing and dry cleaning fastnesses were good with a 4/5 rating, and fastnesses to rubbing and light were acceptable with a 3/4~4 rating.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.635-640
• /
• 2005

In this paper, we have improved a novel high tilted optically compensated bend (OCB) (HTOCB) mode by using high tilt angle that was generated by the unique baking condition on the homeotropic alignment layer. The high tilt angle of liquid crystal (LC) was generated by new alignment process that tilt angle changed homeotropic state to homeogenous state using Hot-plate equipment; we obtained about $40\~50^{\circ}$ tilt angle with negative and positive dielectric anisotropy on the homeotropic polyimide (PI), and then LC tilt angle decreased as increasing baking temperature and time. At last, we obtained about $10^{\circ}$ with positive type NLC $({\Delta}n>0)$. Also, the LC tilt angle of positive type NLC $({\Delta}n>0)$ decreased as increasing rubbing strength at the same baking temperature and time. The novel LC operating mode (HTOCB) that used the high tilt angle by the new alignment method was improved. The response time of the novel HTOCB cell was faster than that of conventional OCB cell. We suggest that the developed the novel HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.115-124
• /
• 1997

In this study, Water Repellent Finish was carried out before dyeing on cotton fabrics. It was aimed to improve on dyeing properties of cotton fabrics with direct dye. The results obtained were summerized as follows: 1. The K/S value of water repellent finished cotton fabrics increased. This phenomena in water repellent finished cotton fabrics were much more noticiable than unfinished cotton fabrics. 2. The color fastness(light, washing, and rubbing) of water repellent finished cotton-dyed were worse than those of unfinished cotton-dyed with direct dye. △E of water repellent finished cotton fabrics wasn't showed significant difference as compared with that of unfinished cotton fabrics. 3. The water repellency of finished cotton after dyeing got down from 100 to 70. That of finished-cotton before dyeing was 100. 4. Moisture regain, stiffness and weight of finished cotton fabrics were not almost differenciated with unfinished cotton fabrics. Moreover, the tensile strength of finished cotton fabrics was increased compared to that of unfinished cotton fabrics. As conclusion, according to the above results when the cotton fabrics were dyed with direct dye, it was much more effective that water repellent finished cotton fabrics were dyed rather than trational process, that is pre-dyeing after-finishing even if, by low liquor ratio. The physical properties of fabrics were maintained or increased.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.1
• /
• pp.21-23
• /
• 2003

The washing effects on pretilt angle generation in a nematic liquid crystal (NLC), 4-n-pentyl-4'-cyanobiphenyl (5CB) on a rubbed polyimide (PI) surface with trifluoromethyl moiety have been successfully studied. The pretilt angle of 5CB is increased by the washing process on the rubbed PI surface. The surface tension on the rubbed PI surface increases with the rubbing strength RS and then saturated above RS: 150 mm. The pretilt angle of 5CB for all washing processes on the rubbed PI surface decreases with the surface tension. We have found that the pretilt angle of 5CB on the rubbed PI surface may be attributed van der walls (VDW) dispersion interaction between the LC molecules and the polymer surfaces having trifluoromethyl moieties.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1036-1044
• /
• 2008

This research from analyzing dyed silk fabrics treated with persimmon juice by padding concludes as follows : The add on is increased as the number of padding increase and the color of the dyed fabrics holds red-yellow colors which has low brightness and high chromatic colors. The fabrics dyed with persimmon juice have properties such as 2nd grade of light fastness, 4~5th grade of perspiration fastness and rubbing fastness, and 3~4th grade of washing fastness. The dyed fabrics exposed to UV light have deeper yellow-red color than things exposed to sunlight. The silk fabrics treated premordants have shown strong yellow colors, especially the fabrics added Fe mordant have shown greenish red-yellow colors. As the padding times of dyeing with persimmon juice are increased, strength and water-repellent property are enhanced along warp and weft direction respectively but anti-crease property is decreased. Also, the dyed fabrics have good antibacterial activity and deodorization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.530-533
• /
• 2002

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.826-832
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA- $\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. However, a small decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with main chain type was measured. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA- $\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1611-1620
• /
• 2007

The precaution to spray with agricultural chemicals is very important, in particular personal protective equipment against pesticide in order to protect farmers# pesticide poisoning. The Ministry of Agriculture and Forestry has proclaimed the announcement of pesticide proof clothing(PPC) in 1983, and revised it in 1987. The announcement had many performance items to achieve the high-quality protective clothing for pesticide including weight, density, force strength, dimensional change(in washing and drying), fastness(dyeing, washing, sweating and rubbing) and water resistance of clothes. Announcement of the PPC has better durability and penetration resistance function than former days, but the plenty of farmers didn#t wear it because of the intolerable heat. To increase wearing rates, the pesticide proof clothing must be estimated the water-vapour resistance. From the results, the developed PPC with polyester treated water-repellent showed the more excellent comfort than an existing PPC with nylon coated polyurethane. But the developed PPC appeared to have the low water-vapour resistance. Therefore, it is suggested that the property of pesticide penetration must be evaluated through the field test in the future study.