• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.219-225
• /
• 2018

In this paper, for the testing of tensile strength of dead-end clamp used in transmission line, resulting values were estimated by designing and producing the horizontal version of widely-used vertical tensile tester. Tensile strength test of dead-end clamp for transmission line is essential for quality test of products. Moreover, tensile tester is an equipment that requires high level of reliability which needs to be examined through sampling tests commensurate with total inspection. Frames of tensile tester were made up of H-beams so that it can endure more than 20 [tons] of load capability and the test was implemented for 60[seconds] applying five types of tension. In consequence, the tester could withstand up to 21,600[kg] of weight as well as all types of tension. This newly developed horizontal tensile tester can be utilized in figuring out properties of various materials by estimating tensile strength of materials such as metal, rubber and fiber.

• Elastomers and Composites
• /
• v.22 no.3
• /
• pp.204-212
• /
• 1987

The purpose of this study is to investigate the reinforced effect between MGF treated silane coupling agents and rubber matrix under the configuration chemical bonds, also the effect of triazine thiol compounds. For this study, vulcanizates were prepared with fifteen different compounding formulas. Their vulcanization characteristics, physical properties were examined by means of the ODR(Oscillating Dist Rheometer), the tensile tester, the benzene swelling test. The results of this study obtained are as follows: 1. In the ODR test, the MA vulcanizate was the fastest one in terms of having reached to optimum cure time($t_{90}$) and, with the same formula, when MGF vulcanizates, the shortest optimum cure times has appeared. 2. The SA, SC vulcanizates were the best the other in the physical properties such as 100%modulus, 200%modulus, 300%modulus, tensile strength. The SB vulcanizate, with higher density of crosslinking than other vulcanizates. The vulcanizates, which were filled with MGF treated with silane coupling agents we were the higher density of crosslinking than vulcanizates filled with MGF only. 3. In aging properties, the silica vulcanizates appeared to be better than the other vulcanizates. The aging Properties of treated MGF vulcanizates were similar to the silica vulcanizates. The(CR+APS+silica) and(CR+APS+MCF) were easily crosslinked by exposure to the air, and the physical properties have been improved.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2011

Eco-friendly materials or bio-composites were made with poly(lactic acid) (PLA) as matrix polymer and kenaf fibers as filler. Also, acetylated kenaf fibers and compatibilizer were adopted in order to improve the interfacial adhesion between fiber and polymer. In this study, the effect of chemical modification and compatibilizer on the mechanical-viscoelastic and morphology properties of the bio-composites was discussed. The hydrophobic fibers by acetylation were known to show better interfacial bonding with the matrix polymer and resulted in improved performance and morphology. Viscoelastic property and glass transition temperature, however, were not nearly enhanced.

• Korean Business Review
• /
• v.11
• /
• pp.277-293
• /
• 1998

The purpose of this study is to analyse the overall relationship between the advertisement expenses and the two major indicies of business performance, that is, the total amount of sales and the discipline have contrasted the expenses for commercial advertisement with the total amount of sales or with the business performance, respectively, utilizing data on a specific product observed through 3 to 5 years. This study attempts to enlarge the scope of observation and the content of analysis. In order to attain the purpose of this study, the rate of increase in the advertisement expenses is taken as the independent variable and the two major indicies of business performance, the total amount of sales and the resultant interest, as the dependent variables. Business companies or firms which have continually been listed on the board of Korea Stock Exchange for 14 years, from 1982 to 1995, were grouped into four major business categories; 1)Food and beverage industries, 2)Fiber, clothings, and leather industries, 3) Medicine, chemistry, oil, coal, and rubber industries, and 4) Assembled mechanics and metallurgy, machinery, and maintenance industries. Utilizing the KIS-DATA, compiled by Korea Credit Evaluation, Ltd., 30 to 40 samples of business companies or firms were randomly selected from each category. Finally 125 samples were selected and put into regression analyses and follow-up tests by appropriate statistical models, in order to verify if there were any noticeable correlations. The final result obtained through the afore-mentioned research method shows that the amount of advertisement expenses has strong correlations with the amount of sales and the resultant interest. Viewed by business category, in the case of fiber, clothings, and leather industries, the relationship turned out to be significant only with the rate of increase in the total amount of sales, while, in the case of food and beverage industries, the rate of increase in the total amount of sales showed a negatively significant correlations.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.305-312
• /
• 2007

Among many types of light rail transits (LRT), the rubber-tired automated guide-way transit (AGT) is prevalent in many countries due to its advantages such as good acceleration/deceleration performance, high climb capacity, and reduction of noise and vibration. However, AGT is generally powered by high-voltage electric power feeding system and it may cause electromagnetic interference (EMI) to measurement sensors. The fiber optic sensor system is free from EMI and has been successfully applied in many applications of civil engineering. Especially, fiber Bragg grating (FBG) sensors are the most widely used because of their excellent multiplexing capabilities. This paper investigates a prestressed concrete girder bridge in the Korean AGT test track using FBG based sensors to monitor the dynamic response at various vehicle speeds. The serviceability requirements provided in the specification are also compared against the measured results. The results show that the measured data from FBG based sensors are free from EMI though electric sensors are not, especially in the case of electric strain gauge. It is expected that the FBG sensing system can be effectively applied to the LRT railway bridges that suffered from EMI.

• The Korean Journal of Pharmacology
• /
• v.25 no.1
• /
• pp.23-30
• /
• 1989

Buprenorphine, one of the mixed agonist-antagonist opioid drugs was used to inverstigate the opioid receptor on frog sciatic nerve A fibers. Action potentials were recorded for 4 hrs by a sucrose gap apparatus which were separated by four rubber membranes. To examine the one of the mechanism of action of buprenorphine, meperidine or naloxone was added after or before the treatment of buprenorphine. The results of this experiment were as follows: 1. Buprenorphine suppressed significantly the compound action potentials of frog sciatic nerve, and the maximal effects were shown both at $10^{-4}\;M$ and at $10^{-8}\;M$. 2. The dose-response relationship of buprenorphine on the depressant effect in frog sciatic nerve was biphasic and inverted U-shaped. 3. Buprenorphine blocked the effect of Meperidine $(10^{-3}\;M)$ on this preparation. 4. The depressant effcct of Buprenorphine on frog sciatic nerve was blocked by $10^{-8}\;M$ naloxone. From the above results, buprenorphine acts as one of agoinist-antagonistic effect on frog sciatic nerve, and the opioid receptor on this preparation is located on or near the intracellular opening of the sodium channels, which are sensitive to naloxone.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.97-104
• /
• 2011

This paper contains of descriptions of deterioration diagnosis of the surface and a coating layer for maintenance managements of large spatial structures with membrane structure. Membrane is a roofing material of the structures that its performance of durability including its performance of chemical resistance and corrosive resistance is considered to be highly important. In general, the items of diagnosis for maintenance managements such as membrane extensively include the diagnosis of deterioration of the membrane surface, of a coating layer of membrane, the diagnosis of deterioration between a coating layer and fiber, of overall surface of membrane, of the class of ropes, of reinforced belts, and of the cover of rubber. The object of this study that needs maintenance managements of the membrane with PVC and FIFE which are commonly used and shows the diagnosis results of deterioration of the surface and a coating layer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.9-13
• /
• 2014

Glass fiber reinforced thermoplastics(GFRTP) is made by adding chemical additive to glass fabric which is strong at a high temperate, incorrodible, and good at intensity and specific gravity. Although we focused on the weight lightening, the intensity of GFRTP is also important. To remedy thermoplastic resin's inferior property of matter to thermo-hardening resin, we formed several specimen, differing the chemical additive as Homo PP, MAPP 3%, Rubber 5%, and mixed. We put pressure of 5 type on the specimens. The analyses result for the different pressure, the resin spreads evenly, then the coherence is increased. Eventually, the mechanical properties are changed. When high intensity is needed, it is good idea to use polypropylene(PP) which has good coherence with glass fabric as chemical additive. We can get better intensity when we form the resin at the optimum pressure depending on mixing of chemical additive and glass fabric than when we increase the pressure.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.83-83
• /
• 2011

나노섬유는 마이크로 섬유에 비해 $10^3$배 정도의 넓은 표면적을 가지며, 다른 섬유와 비교하여 유연성, 투습성과 같은 특성이 우수하다. 나노섬유의 제조방법은 여러 가지가 있으나, 상용화의 가능성, 적용 고분자의 다양성, 제조공정의 단순성, 다양한 제품기술에의 응용성 등을 고려하여 선택하여야 한다. 나노섬유의 제조기술은 방법에 따라 전기방사, 복합방사, 멜트블로운 공정, 에어레이드 공정, 습식 공정 등으로 나눌 수 있다. 전기방사 등 나노섬유를 대량생산하여 상용화하려는 노력을 지속적으로 하고 있으나 나노섬유의 염색가공에 관련되어 기술적 한계로 제품전개에 많은 어려움을 겪고 있다. 그리하여 본 연구에서는 나노섬유 단독으로 제품화하기에는 강도 등의 문제로 PET에 워터펀칭한 복합소재로 개발하여 900nm 이하의 나노섬유에 대한 최적의 날염조건과 현장적용 생산기술을 개발하고자 하였다. 나노섬유 복합소재에 대하여 Brown, Red, Blue, Black 색상의 안료와 Urethane, Rubber, Acrylic, Eco Binder를 사용하여 날염 실험하였으며, 최적의 조건으로 현장생산에 적용하여 생산하였다. 안료의 고착성을 높여 날염성과 염색견뢰도를 증진시키기 위하여 원적외선 열처리기를 개발하여 현장생산에 접목시켰다. 원적외선 열처리기는 벙커C유 또는 가스 등을 사용하는 텐터나 증열기와는 다르게 전기를 에너지원으로 하여 원적외선 램프를 이용한 건열시스템의 형태로 저공해 및 그린 형태의 열처리기 시스템으로, 섬유에 대한 원적외선의 조사거리, 원적외선 램프의 간격, 적용 온도, 원단이송 속도 등에 따른 최적의 원적외선 열처리기 날염조건을 설정하였다. 바인더에 따른 날염성은 우레탄계 바인더를 사용하였을 경우에 가장 선명하고 깊은 색상을 보였으며, 아크릴계 바인더의 경우가 가장 낮은 색상을 보였으며 염색견뢰도는 대체적으로 양호한 결과를 얻었다. 그리고, 최근 환경적인 추세에 맞추어 에코 바인더를 사용하여 날염한 결과 염색성과 내구성 등은 우레탄계와 아크릴계 바인더의 중간 정도의 결과를 보였다.