• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.331-338
• /
• 2001

Seismic performances of the base isolated model of Five Story Stone Pagoda were studied through shaking table tests. Friction pendulum system (FPS), Pure-friction system with laminated rubber bearing (LRB) and Ball with rubber bearing were selected fur the comparison of performances. Performances of specially designed isolation systems were tested dynamically using shaking table. The test results of isolated model are compared with those of fixed base model. Compared with fixed base model, the isolated model showed that it could withstand much higer intensity of earthquake motion. The Effective Peak Ground Acceleration (EPGA) value of isolated model when the top component tipped over was above twice of that value in case of fixed base model. According to the additional test results, the lower value of coefficient of friction than that of common frictional base isolation systems is more effective to protect the piled multi-block system of Pagoda against moderate intesity of ground motion.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• 대한화학회지
• /
• 제48권3호
• /
• pp.266-272
• /
• 2004

소형 고체상 전극에 단일 조성 실온 경화형(one-component room temperature vulcanizing type) 실리콘러버 730(730 RTV)을 지지체로 도입하여 가소제가 필요 없는 탄산이온선택성 전극막을 개발하였다. 본 연구에서 최적화된 탄산이온선택성 전극막의 조성은 85.75 wt%의 730 RTV, 11.08 wt%의 trifluoroacetyl-p-decylbenzene(TFADB), 3.17 wt%의 tridodecyl-methylammonium chloride(TDMACl)로 제조 되었고, 우수한 전기화학적 특성(감응기울기 (26.3 mV/dec.), 선택성($logKT^{pot}_{CO_{2},Cl^-}$= -4.00, $logKT^{pot}_{TCO_{2},Sal^-}$=1.69), 검출한계(4.0${\times}10^{-4}M$))을 보였으며, 이와 같은 조성의 막을 도입한 평면형 고체상 센서는 60일 이상 초기특성을 유지하였다.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3631-3637
• /
• 2013

갱웨이 벨로우즈는 관절형 고속철도차량 객차 끝단부 사이에 다양한 변위차를 고려하여 갱웨이 프레임에 장착된 이중 주름구조 네오프렌 고무부품이다. 실제 운행중의 벨로우즈의 파손은 터널 통과시 기밀 파손으로 인한 이명현상 발생과 함께 소음 증가로 승객의 승차감에 심각한 영향을 미친다. 본 연구에서는 고속철도차량 갱웨이 벨로우즈의 안전성 연구일환으로서, 차량주행시 차량 끝단부의 3축 회전변위(롤링, 요잉, 피칭변위차)를 고려한 갱웨이 벨로우즈의 비선형 해석을 수행하였다. 본 고무의 비선형 재료 특성은 단축인장 및 등2축 인장시험을 수행하여 구하였다. 또한, 비선형 해석결과로부터 회전변위 및 마찰계수의 영향을 평가하였다.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.24-29
• /
• 2015

In this study, we investigated the effects of a crosslinking agent and a compatibilizer on the mechanical and rheological properties of waste PP and waste ground rubber tire (WGRT) composites. In order to simulate a commercial TPV, the component of waste PP and WGRT was fixed at 30 and 70 wt%, respectively. With the simple addition of SEBS-g-MA into the waste PP/WGRT composites, the tensile strength of the composite was decreased, whereas both the elongation at break and impact strength were significantly increased because of rubbery characteristics of SEBS-g-MA. In order to further improve the properties of the composites, the waste PP/WGRT/SEBS-g-MA composites was revulcanized with dicumyl peroxide (DCP). As expected, mechanical properties of the revulcanized composites was generally improved. Especially, with 15 and 1 phr of SEBS-g-MA and DCP, elongation at break was highest value of about 183% because of the recross-linking of WGRT without chain scission of the main chain. It was found that complex viscosity of the revulcanized composite increased which might verify further vulcanization of the WGRT.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.548-549
• /
• 2010

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.23-33
• /
• 1992

The negative pressure distribution curves of the exit of printing nip were obtained by the transducer type tackometer. As the results, found that the elasticity of rubber rollers and pastic viscosity affect to the maximum negative and positive pressure but, the gap of the printing nip didn`t affects to the tack values of ink and ink film thickness. Ink spritting is accured by negative pressure and inks viscoelasticity. And the tack value is affect by properties of the vehicle component in the inks.

• Elastomers and Composites
• /
• 제57권1호
• /
• pp.13-19
• /
• 2022

Polycarbonate diol-based waterborne polyurethane (WPU) was prepared by prepolymer mixing process. The prepolymer mixture contained the polycarbonate diol, isophorone diisocyanate (IPDI), dimethylol propionic acid, triethylamine, and ethylenediamine (EDA). The NCO/OH ratio in the prepolymer was adjusted by controlling the molar ratio of IPDI, and its effects on the properties of WPU were studied. The structure of WPU was characterized by fourier transform infrared spectroscopy. The average particle size increased and viscosity decreased with increasing NCO/OH ratio and EDA content in WPU. The reduced phase separation between soft and hard segments increased glass transition temperature. The reduction in the thermal decomposition temperature could be attributed to the low bond energy of urethane and urea groups, which constituted the hard segment. Additionally, the polyurethane chain mobility was restricted, elongation decreased, and tensile strength increased. The hydrogen bond between the hard segments formed a dense structure that hindered water absorption.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.74-85
• /
• 2010

In order to formulate the compounded polypropylene(C-PP) which is suitable to an automotive door trim panel, 9 sorts of properties were measured after manufacturing the C-PP using an extruder and an injection machine with polypropylene(PP), ethylene-octene rubber(EOR) and talc. Mixture design, especially extreme vertices design, in DOE with MINITAB - commercial software was used to analyze the data. The relations between each property and each component, for example, $y=0.00907222x_1+0.00870556x_2+0.0155722x_3$ for specific gravity, were found out by the regression analysis and the variance analysis. The optimized formulation of the C-PP for an automotive door trim panel was acquired at PP(77.6962), EOR(11.0238) and talc(10.2800) by use of the response optimizer(mixture) in MINITAB.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.701-721
• /
• 2016

Base isolation is a well-established passive strategy for seismic response control of buildings. In this paper, an efficient framework is proposed for reliability-based design optimization (RBDO) of isolated buildings subjected to uncertain earthquakes. The framework uses reduced function evaluations method, as an efficient tool for structural reliability analysis, and an efficient optimization algorithm for optimal structural design. The probability of failure is calculated considering excessive base displacement, superstructure inter-storey drifts, member stress ratios and absolute accelerations of floors of the isolated building as failure events. The behavior of rubber bearing isolators is modeled using nonlinear hysteretic model and the variability of future earthquakes is modeled by applying a probabilistic approach. The effects of pulse component of stochastic near-fault ground motions, fixity-factor of semi-rigid beam-to-column connections, values of isolator parameters, earthquake magnitude and epicentral distance on the performance and safety of semi-rigidly connected base-isolated steel framed buildings are studied. Suitable RBDO examples are solved to illustrate the results of investigations.