• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.123-132
• /
• 2018

The purpose of this study was to evaluate the reduction effect of non point source (NPS) pollution in Haean highland agricultural catchment ($62.8km^2$) for 13 BMP scenarios under RCP (Representative Concentration Pathway) 4.5 and 8.5 scenarios. Under the present climate condition, the BMP (best management practices) reduction efficiency of SS (suspended solid), T-N (total nitrogen), and T-P (total phosphorus) showed +25.7%, +4.2%, and +16.1% for VFS (vegetative filter strip), +0.1%, +15.6%, and +5.7% for FC (fertilizer control), and +6.3%, -2.9%, and +3.9% for RSM (rice straw mulching) respectively. In general, effective was the best for SS and T-P reductions, and the FC was the best for T-N reduction. The negative effect of T-N on RSM was induced by increase in infiltration and solute transport to baseflow. Under the future climate change scenarios, the SS, T-N, and T-P reduction efficiency showed the range of +1.9~+11.6%, -1.9~+0.2%, and +5.3~+11.9% respectively. The 3 BMPs (VFS, FC, and RSM) application in the future showed negative and little differences (-0.5~+1.6%) for SS and T-N reduction efficiencies while T-P reduction efficiency showed +0.3~+7.6% comparing with the baseline period. To achieve an increase in the reduction efficiency of future SS and T-N by +2~+10%, the combined application of more than two BMPs is necessary.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.957-963
• /
• 1999

두부의 냉동저장중에 일어나는 단백질 변성과 이로 인하여 일어나는 조직감 열화현상을 완화하기 위하여 항냉동제 첨가 두부의 제조 공정을 개발하고 항냉동제 최적 배합비율과 첨가량을 조사하였다. 여러 가지 항냉동제를 첨가하여 비압착 두부를 제조하여 냉동저장한 후 다시 해동한 냉동저장 두부의 조직감 변화를 반응표면분석법(RSM)으로 분석하고 관능검사 결과와 비교하였다. 냉동으로 인한 두부의 조직감 변화를 최소화하는데는 glucose, glycerol, sorbitol, sodium tripolyphosphate가 단일 항냉동제로서 효과가 있었으며, glycerol과 sodium tripolyphosphate 사이에서는 상호작용도 있는 것으로 나타났다. 결론적으로 냉동두부에 항냉동제를 단독으로 첨가하는 것보다는 여러 가지를 혼합하여 첨가하는 것이 두부조직의 열화방지에 더 효과적인 것으로 나타났다. 조직감 변화만을 고려한 절단시험의 RSM을 통하여 계산된 냉동두부의 항냉동제 최적 첨가량은 glucose 2.1%, glycerol 6.9%. sorbitol 2.1%, propylene glycol 0.4%, sodium tripolyphosphate 0.3% 이었으며, 조직감과 함께 맛과 향까지 고려한 전체 기호도 조사에 의한 항냉동제 최적 첨가량은 glucose 1%, glycerol 2%, sor-bitol 1%, propylene glycol 0.2%, sodium tripolyphosphate 0.5% 이었다.

• Fisheries and Aquatic Sciences
• /
• 제5권1호
• /
• pp.21-27
• /
• 2002

Angiotensin I converting enzyme inhibitory activities of shelled krill (Euphausia superba) hydrolysates by autolysis and by hydrolysis with commercial proteases were analyzed. Among the proteases, Alcalase was the most effective protease for the hydrolysis of krill considering the degree of hydrolysis $(87.5\%)$ and the ACE inhibitory activity $(60\%)$. Four hour hydrolysis suggested as the most suitable and economic. In order to establish the optimum hydrolysis condition of krill, degree of hydrolysis and ACE inhibitory activity as affected by Alcalase concentration and water amount added were statistically analyzed by response surface methodology (RSM). The optimum hydrolysis condition was $2.0\%$ Alcalase hydrolysis in 2 volumes (v/w) of water at $55\% for 4 hr. The hydrolysate prepared from the optimum hydrolysis condition was fractionated by molecular weight. The lower molecular weight fraction showed the higher ACE inhibitory activity. $IC_{50}$ of the fraction under 500 Da was 0.57mg protein/mL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.414.1_415.1
• /
• 2009

This paper deals with optimum design criteria for maximum torque density & minimum torque ripple of Flux Switching Motor (FSM) using RSM & FEM. The focus of this paper is to find a design solution through the comparison of torque density and torque ripple according to rotor shape variations. And then, a central composite design(CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• 한국조리학회지
• /
• 제23권5호
• /
• pp.67-76
• /
• 2017

This study investigated the quality characteristics of melon jam with RSM. The melon jam was prepared with 50~65% sugar, 0.5~2.0% pectin, and 0.1~0.5% citric acid. Sugar and pectin caused the increase in sweetness, Hunter's colorimetric characteristics (a, b), and firmness. Citric acid caused decrease in pH, sweetness, firmness. Sensory evaluation results showed that preferences for the melon jam increased as sugar, pectin, and citric acid approached their optimum values and then decreased as they exceeded optimum levels. Consequently, the proposed optimum levels in the ingredient formulation for manufacture of the standard melon jam were 59.0% sugar, 1.4% pectin, and 14.9% citric acid, as based on both numerical and graphic statistical analyses. Ultimately, this study was expected to contribute to the commercialization of melon jams of high quality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.119-122
• /
• 2002

This paper presents detailed characteristic of a Reluctance Synchronous Motor(RSM) which has a transverse-laminated rotor. First of all, the analysis of a magnetic circuit field between stator and rotor should be achieved in order to predict the performance characteristic of the RSM. For the analysis of a magnetic circuit field, the Finite Element(FE) analysis and a experimental method are used. The analytical result of the inductance flux distribution, vector potential, and the output shows some good characteristic along with the load condition.

• 한국미생물·생명공학회지
• /
• 제27권2호
• /
• pp.136-144
• /
• 1999

Since the condition of immobilization must be optimized, it is very important to know whether and on how conditions bacterial cells retain their metabolic activity during immobilization process. A bioluminescence intensity had the maximum value when cell concentrations were between 1.0 and 1.2 measured at O.D660. The strontium alginate was used as an immobilization matrix and two independent factors for immobilization of Photobacterium phosphoreum with strontium alginate were optimized with the response surface methodology(RSM) considering degree of bioluminescence. As a result, the optimum concentration for immobilization was found to be 2.4%(w/w) for sodium alginate and 0.31M for strontium chloride, respectively. A dilution was carried out with 2.5%(w/v) NaCl solution that is an optimum environmental condition for growth of P. phosphoreum. Under the such condition of immobilization, hardness could be predicted as 4.66$\times$104N/$m^2$ and it took different time according to the volume of matrix to be immobilized completely.

• 소성∙가공
• /
• 제15권3호
• /
• pp.226-231
• /
• 2006

The fuel injector is a pa.1 that controls the fuel supply of automotive engine. The housing of the fuel injector supports the rod, the needle valve and the solenoid. In this study, the rigid-plastic FE-analysis by using the design of experiments (DOE) and the response surface methodology (RSM) has been performed to produce the product reducing the under-fill and the maximum effective strain. From the results of DOE, the stem of counter punch and the face angle of punch at the $1^{st}$ process, and the stem of punch at the $2^{nd}$ process were determined as the significant design variables far each response such as the upper under-fill, lower under-fill and the maximum effective strain. From the results of RSM, the optimal values of the design variables have been also determined by simultaneously considering the responses.

• 대한화학회지
• /
• 제58권1호
• /
• pp.80-84
• /
• 2014

The process of petroleum involves in a large amount of oily wastewater that contains high levels of chemical oxygen demand (COD) and toxic compounds. So they must be treated before their discharge into the receptor medium. In this paper, wet peroxide oxidation (WPO) was adopted to treat the oily wastewater. Central composite design, an experimental design for response surface methodology (RSM), was used to create a set of 31 experimental runs needed for optimizing of the operating conditions. Quadratic regression models with estimated coefficients were developed to describe the COD removals. The experimental results show that WPO could effectively reduce COD by 96.8% at the optimum conditions of temperature $290^{\circ}C$, $H_2O_2$ excess (HE) 0.8, the initial concentration of oily wastewater 3855 mg/L and reaction time 9 min. RSM could be effectively adopted to optimize the operating multifactors in complex WPO process.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.64-68
• /
• 2012

In this paper, a design method for minimizing the cogging torque of an Interior Permanent Magnet Motor (IPM) is proposed based on a hybrid algorithm. The suggested optimization algorithm is based on a combination of the Response Surface Method (RSM) and Simplex Method. The results show that the proposed method provides improved characteristics compared to the conventional methods, such as a shorter calculation time and the acquisition of a more correct solution.