• 환경영향평가
• /
• 제9권3호
• /
• pp.177-183
• /
• 2000

The Landsat Thematic Mapper (TM) has suggested that spatial and spectral characteristics would be suited to evaluate water quality of lake. But, TM has not been commonly used for the analysis of in-land water quality, such as surface water temperature, chlorophyll-a, suspended sediments, and Secchi depth in domestic research. This paper summarizes the analysis of Landsat 5 - TM image collected on 22 Feb 1996 for evaluation of chlorophyll-a and surface temperature in the Lake Soyang. And, field measurements collected in the Lake Soyang were used to obtain water optical algorithms for calibration of satellite data. It is concluded that we can assess chlorophyll-a with remote sensing reflectance and surface temperature with thermal band in lake Soyang. However, surface temperature calculated with thermal band of Landsat TM are underestimated. Relationship between remote sensing reflectance and chlorophyll-a using the ratio of TM band 1 and band 3 is as follows; Y = 17.206 - 6.4711 * (Rrs(band1) / Rrs(band3)) $R^2$=0.8762 and, using the ratio of TM band 1 and band 2 as follows; Y = 57.77 - 35.771 * (Rrs(band1) / Rrs(band2)) $R^2$=0.8317.

• The Plant Pathology Journal
• /
• 제17권3호
• /
• pp.149-153
• /
• 2001

A total of 2109 isolates of Botrytis cinerea were collected from infected plants fo strawberry, tomato, and cucumber in Korea from 1994 to 1996. Based on in virtotests for mycelial growth on potato-dextrose agar containing fungicides, the esolates were classified into six phenotypic groups : SSR, SRR, RSS, RRS, RSR, and RRR, representing sensitivity (S) or resistance (R) to carbendazim, procymidone, and diethofencarb. In that order the isolation frequencies of the SSR, SRR, RSS, RRS, RSR, and RRR phenotypes were 28.7, 1.1, 28.8, 39.4, 1.0, and 0.9%, respectively. Three isolates from each SSR, SRR, RSS, RRS, and RSR and an isolate of RRR phenotype were selected and evaluated for their fitness-related characteristics such as pathogenic aggressiveness, mycelial growth rate, sporulation, and sclerotial formation. Competitive abilities of the SSR, SRR, RSS, RRS, and RSR phenotypes were also compared by inculating mixtures of conidial suspensions of two phenotypes to cucumber plant, and then determining re-isolation frequencies from lesions. In general, significant differences in fitness-related characteristics, except pathogenic aggressiveness, were found not only between but also within phenotype groups. In the competitiveness tests, carbendazim-sinsitive phenotypes (SSR and SRR) were found to be more competitive than the resistant ones (RSS and RSR), whereas, the procymidone-resistant phenotypes (SRR and RRS) appeared to be more competitive than the sensitive ones (SSR, RSS, and RSR). There was no consistent dominance in competitiveness between the diethofencarb-resistant and sensitive phenotypes. The RSR phenotype was the least competitive among the five phenotypes.

• Advances in nano research
• /
• 제14권4호
• /
• pp.313-327
• /
• 2023

Zinc metal organic framework (MOF_Zn)-loaded goad nanoparticles (AuNPs) sol (Au@MOF_Zn), which was characterized by TEM, Mapping, FTIR, XRD, and molecular spectrum, was prepared conveniently by solvothermal method. The results indicated that Au@MOF_Zn had a very strong catalytic effect with the nanoreaction of AuNPs formation between sodium oxalate (SO) and HAuCl4. AuNPs in the new indicator reaction had a strong resonance Rayleigh scattering (RRS) signal at 370 nm. The indicator AuNPs generated by this reaction, which had the most intense surface enhanced Raman scattering (SERS) peak at 1621 cm -1. The new SERS/RRS indicator reaction in combination with specific aptamer (Apt) to fabricate a sensitive and selective Au@MOF_Zn catalytic amplification-aptamer SERS/RRS assay platform for carbendazim (CBZ), with SERS/RRS linear range of 0.025-0.5 ng/mL. The detection limit was 0.02 ng/mL. Similarly, this assay platform has been also utilized to detect oxytetracycline (OTC) and profenofos (PF).

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.259-262
• /
• 2013

This paper analyzes the effects of metamaterial slabs with negative permeability when applied to a two-loop wireless power transmission (WPT) system, both in theory and electromagnetic (EM) simulations. The analysis of magnetic flux focusing provided here assumes quasi-magnetostatics or magnetostatics. The slab structures with negative permeability have been realized using the periodically arrayed ring resonators (RRs) at 13.36MHz. Some examples with ideal lossless slabs of -1, -2, and -3 showed a great enhancement of WPT efficiencies when compared with the free space cases. However, practical lossy slabs made of planar copper RRs did not show significant enhancement of WPT efficiencies due to the relatively high losses in the ring resonator (or in the slab consisting of RRs) near the resonant frequency.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.500-505
• /
• 1995

This paper describes the results of simulation of a CANDU operational transient problem (re-startup after short shutdown) using the Coupled Reactor Kinetics(CRKIN) code developed previously with CANDU Reactor Regulating System(RRS) logic. The performance in the simulation is focused on investigating the behaviours of neutron power and regulating devices in accordance with the changes of xenon concentration following the operation of the RRS.

• 대기
• /
• 제25권1호
• /
• pp.117-127
• /
• 2015

The presences of clouds significantly influence the accuracy of ozone retrievals from satellite measurements. This study focuses on the influence of clouds on Ozone Monitoring instrument (OMI) ozone profile retrieval based on an optimal estimation. There are two operational OMI cloud products; OMCLDO2, based on absorption in $O_2-O_2$ at 477 nm, and OMCLDRR, based on filling in Fraunhofer lines by rotational Raman scattering (RRS) at 350 nm. Firstly, we characterize differences between $O_2-O_2$ and RRS effective cloud pressures using MODIS cloud optical thickness (COT), and then compare ozone profile retrievals with different cloud input data. $O_2-O_2$ cloud pressures are significantly smaller than RRS by ~200 hPa in thin clouds, which corresponds to either low COT or cloud fraction (CF). On the other hand, the effect of Optical centroid pressure (OCP) on ozone retrievals becomes significant at high CF. Tropospheric ozone retrievals could differ by up to ${\pm}10$ DU with the different cloud inputs. The layer column ozone below 300 hPa shows the cloud-induced ozone retrieval error of more than 20%. Finally, OMI total ozone is validated with respect to Brewer ground-based total ozone. A better agreement is observed when $O_2-O_2$ cloud data are used in OMI ozone profile retrieval algorithm. This is distinctly observed at low OCP and high CF.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.82-85
• /
• 2006

The Geostationary Ocean Color Imager (GOCI) will be loaded in Communication, Ocean and Meteorological Satellite (COMS). To efficiently apply the GOCI data in the variety of fields, it is essential to develop the standard algorithm for estimating the concentration of ocean environmental components (, , and ). For developing the empirical algorithm, about 300 water samples and in situ measurements were collected from sea water around the Korean peninsula from 1998 to 2006. Two kinds of chlorophyll algorithms are developed by using statistical regression and fluorescence technique considering the bio-optical properties in Case-II waters. The single band algorithm for is derived by relationship between Rrs (555) and in situ concentration. The CDOM is estimated by absorption coefficient and ratio of Rrs(412)/Rrs(555). These standard algorithms will be programmed as a module of GOCI Data Processing System (GDPS) until 2008.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.410-414
• /
• 2004

The MODIS Land Rapid Response System (RRS) has been developed to provide rapid access to MODIS data globally, with initial emphasis on 250 m color composite imagery and active fire data. Fire detection is based on a contextual algorithm that exploits the strong emission of mid-infrared radiation from fires. This algorithm examines each pixel of the MODIS swath, and ultimately assigns to each one of the following classes: missing data, cloud, water, non-fire, fire, or unknown. In this paper, we introduce the MODIS Rapid Response System established at the Korea Aerospace Research Institute (KARI) and present some application results for Korea using the direct broadcast data acquired at KARI ground station.

• BMB Reports
• /
• 제33권6호
• /
• pp.537-540
• /
• 2000

A simplified but reliable method was developed for the polymerase chain reaction (PCR)-based detection of genetically modified (GM) plants. The modified CTAB (mCTAB) method enabled us to prepare a high quality of genomic DNA from several hundred plant leaf samples in one day. Using DNA samples prepared from seven dicots and two monocots, approximately 1.75-kb regions spanning 17 S to 25 S ribosomal RNA genes were successfully amplified in a 2X PCR pre-mix containing BLOTTO. Further fidelity assessment of the mCTAB method by PCR analysis with Roundup Ready soybean (RRS) and non-RRS plants showed that the DNA samples prepared alternately from each of two lines were evidently free of cross-contamination. These results demonstrate that the mCTAB method is highly recommended for the rapid detection of transgenes in large numbers of leaf samples from diverse transgenic plants.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.596-600
• /
• 2001

The seismic design for an axial blower is the procedure in which the required response spectrum (RRS) is computed by using the floor response spectrum (FRS). The seismic design is very important to reduce severe damages from an earthquake; therefore, the seismic design has been a great concern in engineering society. In this study, after finite element modeling is established by using Ansys, the modal data are obtained such as the natural frequencies, the participation factor, and so on. With these data, the RRS is acquired by a numerical approach. The seismic safety of the axial blower is evaluated.