• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.217-225
• /
• 2014

The system that covers gathering, integrating, exchanging, presenting and analyzing of information within ships and shores for the safety and security in Marine Environment is known as e-Navigation Policy. Northern Europe has been conducting research and development. It came up into a concept that deals with ship's route information between vessels as well as vessels to shores which is better known as route exchange system. The research showed substantial advantages on navigational safety by exchanging the route information between vessels in vicinity and vessels to shores. Therefore, upon the adaptation of route exchange System as a major function in integrated navigational system, the existing procedures in VTS could be changed for betterment. In this study, it was verified the effectiveness of route exchange system by the adaptation of a recent collision accident occurred in Korean coast and suggested that route exchange system which would be carried out by the discretion of VTS center in VTS area. Finally, it proposed the new functions for outstanding services and procedures of integrating traffic organization services on coastal VTS for an effective route exchange system in Korean coastal area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.10-17
• /
• 2018

To prepare the integrated safety management system 'e-navigation', research is being conducted on the route exchange for sharing intended routes between ship and ship, and between ship and land. But they don't have enough specific grounds for the effects of route exchange and the necessity of its introduction and focus on technical aspects like the implementation of route exchange. This study tried to quantitatively analyze the effects of route exchange on sailing safety with the use of ship handling simulation, integrate simulation performers' subjective evaluations, and investigate the effects of route exchange. The ship-to-ship route exchange resulted in the initial collision avoidance action time was 3.43 minutes faster, the collision avoidance direction change rate was 60 %, the proximity to target A was 31 %, and Mean Rudder Angle Index decreased by 57 %. In addition, 95 % of the survey respondents had an effect on the decision making of collision avoidance, 85 % had a positive impact on safety navigation, 90 % had an accident prevention effect, 70 % reduced the psychological burden of officers, and 70 % should be introduced in practice.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.67-75
• /
• 2020

This paper proposes a methodology for gantry route optimization in order to maximize the productivity of a odd-type surface mount device (SMD). A odd-type SMD is a machine that uses a gantry to mount electronic components on the placement point of a printed circuit board (PCB). The gantry needs a nozzle to move its electronic components. There is a suitability between the nozzle and the electronic component, and the mounting speed varies depending on the suitability. When it is difficult for the nozzle to adsorb electronic components, nozzle exchange is performed, and nozzle exchange takes a certain amount of time. The gantry route optimization problem is divided into the mounting order on PCB and the allocation of nozzles and electronic components to the gantry. Nozzle and electronic component allocation minimized the time incurred by nozzle exchange and nozzle-to-electronic component compatibility by using an mixed integer programming method. Sequence of mounting points on PCB minimizes travel time by using the branch-and-price method. Experimental data was made by randomly picking the location of the mounting point on a PCB of 800mm in width and 800mm in length. The number of mounting points is divided into 25, 50, 75, and 100, and experiments are conducted according to the number of types of electronic components, number of nozzle types, and suitability between nozzles and electronic components, respectively. Because the experimental data are random, the calculation time is not constant, but it is confirmed that the gantry route is found within a reasonable time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.4 no.1
• /
• pp.38-42
• /
• 1979

This paper reports that a DDD system controlled by Stored Program Control(SPC) method was constructed and performance testresults were presented using a microprocessor instead of using conventional Wired Program Control(WPC) method. It is shown that the system was designed using a STD O/G unit which has only Point to Point(PTP) access function due to selector driving method as a O/G repeater of this system without any modification. When the system is adopted to a toll exchange system for medium and / or small city, it is expected that the system can be made with small size, high reliability and no use of conventional selector switches. It is also predicted that variation of communication route can be easily realized by simple program modification.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.283-291
• /
• 2006

Recently, a logistics between south and north Korea is rising rapidly by increasing of economical exchange between two Korea and growth of Gaeseoung Industrial Complex. Considering this trend of economic cooperation between two Korea, in addition to a land transportation route it is necessary to secure various logistics and transportation route. A barge transport system which has merits such as a little initial investment and convenience of harbor loading/unloading has been also used to transport freight widely in the EU and USA. In this paper, firstly, a social and economical feasibility study is performed about a shipping route which is using barge transportation system between Incheon and Gaesung. And also we propose several candidate shipping route and investigate a technical feasibility on a realistic possibility of shipping service by some investigation activities. Finally, the optimized shipping route and barge transportation system are proposed in this paper.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.7-14
• /
• 2007

Recently, freight floe between south and north Korea is rising rapidly by increasing cf economical exchange between two Korea and growth of Gaeseoung Industrial Complex. Considering this trend of economic cooperation between two Korea, in addition to a land transportation route it is necessary to secure various logistics and transportation route. A barge transport system which has many merits such as a little initial investment and convenience of harbor loading/unloading has been also used to transport freight widely in the EU and USA. In this paper, firstly, a Gaeseoung industrial complex and its cargo transport are investigated and several candidate shipping routes which are using barge transportation system are proposed. And also we investigate a technical feasibility on a realistic possibility of shipping routes by some investigation activities. Finally, a suitable barge system of candidate shipping route(1) and(2) is proposed in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.23-29
• /
• 2002

The design of data processing of GIS requires efficient method with analysis procedure. This system is easy to be used and managed for presenting route according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. The tier of data is in charge of a class for the exchange, extraction and conservation of data between GeoMedia and application tiers. A route selection algorithm was applied to application tiers, considering all conditions which are necessary for the route selection between a beginning point and an end point, and it was added by module such as data handing, road condition, buffering, clothoid and AHP to select the alternative route followed by new condition. The user tier can express the data acquired by an application tier. Thus three tiers based architecture was presented by implementing design of GIB data processing for its efficiency.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.19-26
• /
• 2014

International attention on the Northern Sea Route has been increased as the decreased sea-ice extents in Northern Sea raise the possibility to develop new sea routes and natural resources. However, to protect ships' safety and pristine environments in polar waters, International Maritime Organization(IMO) has been developing the Polar Code to regulate polar shipping. The marine navigation supporting system is essential for ships traveling long distance in the Northern Sea as they are affected by ocean weather and sea-ice. Therefore, to cope with the IMO Polar Code, this research proposes the functional requirements to develop the marine navigation supporting system for the Northern Sea Route. The functional requirements derived from the IMO Polar code consist of arctic voyage risk map, arctic voyage planning and MSI(Marine Safety Information) methods, based on which the navigation supporting system is able to provide dynamic and safe-economical sea route service using the sea-ice observation and prediction technologies. Also, a requirement of the system application is derived to apply the marine navigation supporting system for authorizing ships operating in the Northern Sea. To reflect the proposed system in the Polar Code, continual international exchange and policy proposals are necessary along with the development of sea-ice observation and prediction technologies.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.81-87
• /
• 2020

This paper creates a standard node for acquiring sensor data from various industrial sensors (IoT/non-IoT) for the establishment of Smart Factory Digital Twin, and provides inter-compatible data by linking zones by group/process to secure data stability and to ensure the digital twin (Digital Twin) of Smart Factory. The process of the Zone Master platform contains interface specifications to define sensor objects and how sensor interactions between independent systems are performed and carries out individual policies for unique data exchange rules. The interface for execution control of the Zone Master Platform processor provides system management, declaration management for public-subscribe, object management for registering and communicating status information of sensor objects, ownership management for property ownership sharing, time management for data synchronization, and data distribution management for Route information on data exchange.