• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.389-395
• /
• 2001

To restrain contact failure, present study investigates the influence of edge machining of an indenter (punch). As for the edge machining, rounding, chamfering, and chamfering and rounding are considered. Contact mechanics is consulted to examine the traction profile and the size of the contact region which are directly influenced by the end profile of the indenter. The effect of rounding size (i.e., radius) in the case of the chamfering and rounding edge-indenter is studied. Shear traction is also evaluated within the regime of partial slip. Size of slip region and its expansion rate due to the increase of shear force are considered to investigate the shape effect of the indenter on contact failure.

• KSBB Journal
• /
• 제22권5호
• /
• pp.282-287
• /
• 2007

The antiviral mechanism of KT5720 is known to inhibit the cAMP-dependent protein kinase (PKA), on the VSV infection in BHK-21 cell cultures. The virus inducted CPE (cell rounding) was almost completely suppressed by KT5720 at 5 uM. The inhibitor, however, did not affect the replication of the virus and the synthesis of viral macromolecules. Immunological studies showed the viral matrix (M) protein displayed intimate association with the cytoskeletal components and probably the cell rounding. KT5720, did not block the cytoskeletal disruption, while the cell rounding was suppressed. These observations suggest that the interaction between the viral M protein and the cytoskeletal components may not be enough to cause the morphological change of the cell. And, the KT5720-sensitive function may be involved in developing the VSV-induced CPE, but not essential for the virus replications.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.33-38
• /
• 2000

In process of tube spinning far shock absorber on vehicles, the selection of feed rate and rounding radius of forming roller and revolution speed of tube and forming roller, forming gap between die and forming roller are very important factors to obtain the optimal process result. In this paper, rigid-plastic FEM and UBET analysis are applied to verify effect of each factors by forming load. We can obtain the optimal conditions to prevent defects during processing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.912-915
• /
• 2002

In this report, we propose a non-separable two-dimensional (2D) Lossless Wavelet Transform (LWT) for image compression. Filter characteristics of our proposed LWT are the same as those or conventional 2D LWT based on applying 1D LWT twice but our coding performance is better due to reduction of rounding effects. Simulation results confirm effectiveness of our proposed LWT.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.221-227
• /
• 2012

We propose optical proximity corrections (OPCs) for digital micromirror device (DMD)-based maskless lithography. A pattern writing scheme is analyzed and a theoretical model for obtaining the dose distribution profile and resulting structure is derived. By using simulation based on this model we were able to reduce the edge placement error (EPE) between the design width and the critical dimension (CD) of a fabricated photoresist, which enables improvement of the CD. Moreover, by experiments carried out with the parameter derived from the writing scheme, we minimized the corner-rounding effect by controlling light transmission to the corners of a feature by modulating a DMD.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.1-6
• /
• 2018

Recently nano meter size pattern (sub-micro scale) can be machined mechanically using a diamond tool. Many studies have found a 'size effect' which referred to a specific cutting energy increase with the decrease in the uncut chip thickness at micro scale machining. A new analysis method was suggested in order to observe 'size effect' in nano scale machining and to verify the cause of the 'size effect' in this study. The diamond tool was indented to a vertical depth of 1,000nm depth in order to simplify the stress state and the normal force was measured continuously. The tip rounding was measured quantitatively by AFM. Based on the measurements and theoretical analysis, it was verified that the main cause of the 'size effect' in nano scale machining is geometrically necessary dislocations, one of the intrinsic material characteristics. st before tool failure.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2861-2873
• /
• 1997

부동 소수점 연산기는 고성능 컴퓨터에서 필수적이며, 최근 대부분의 고성능의 컴퓨터에서는 고성능의 부동 소수점 연산기가 내장되고 있는 추세이다. 부동 소수점 연산이 고속화 되면서 부동 소수점 연산기에서 한개의 단계를 차지하는 반올림 단계가 전체 부동 소수점 연산에 큰 영향을 미친다. 반올림 단계에서는 별도의 고속 가산기를 필요로하여 많은 처리 시간과 칩 면적을 차지하기 때문이다. 본 연구는 고성능 부동 소수점 연산기의 근 간을 이루는 부동 소수점 덧셈／뺄셈기, 곱셈기, 나눗셈기의 처리 알고리즘을 살펴보고, 이를 분석하여 새로운 반올림 처리 알고리즘을 갖는 연산기를 제안하였다. 제안된 부동 소수점 연산기들은 반올림 처리를 위한 별도의 시간을 요하지 않고, 반올림단계를 위한 가산기나 증가기를 필요로 하지 않는다. 따라서, 제안하는 부동 소수점 연산기들은 성능면이나 차지 면적 면에서 모두 효율적이다．

• Journal of Microbiology
• /
• 제40권4호
• /
• pp.295-300
• /
• 2002

Previously, we reported induced expression of developmentally regulated CTP-binding protein 2 (DRG2) in fish cells at the late stage of rhabdovirus infection. To investigate the biological role of fish DRG2 (fDRG2), we transfected CHSE-214 cells with an expression vector containing complete fDRG2 fused to the N-terminal end of an enhanced green fluorescent protein (EGFP). Low level expression of fDRG2-EGFP did not induce morphological change or cell death. However, a high level expression of fDRG2-EGFP induced cell rounding and caused depletion of the cell population in FACS analysis. Several truncated fragments were fused to EGFP. FACS analysis was conducted to determine the presence of cells expressing high levels of the resulting chimera. While cells expressing a high level of N-terminus were detected, those expressing high levels of the C-terminal fragment 243-290 containing the G4 motif were absent in FACS analysis. Based on these observations, we propose that overexpression of fDRG2 may induce cell rounding, a representative cytopathic effect of virus-infected cells in the late stage of infection and the C-terminus of the fDRG2 is essential for this function.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.765-772
• /
• 2000

In this study we are concerned with the problem of approximating a solution of a nonlinear equation in Banach space using Newton-like methods. Due to rounding errors the sequence of iterates generated on a computer differs from the sequence produced in theory. Using Lipschitz-type hypotheses on the second Frechet-derivative instead of the first one, we provide sufficient convergence conditions for the inexact Newton-like method that is actually generated on the computer. Moreover, we show that the ratio of convergence improves under our conditions. Furthermore, we provide a wider choice of initial guesses than before. Finally, a numerical example is provided to show that our results compare favorably with earlier ones.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.25-31
• /
• 2003

A computer simulation model for investigating a two-dimensional (2-D) rounding mechanism in a centerless grinding process is described. This model includes the interference phenomena and the concept of machining elasticity. Since initial contact points are used as a reference, the result of this simulation is not affected by the location of the reference circle center and the radius of the reference circle. Also, details of the machining factor are studied by using process variables (grinding wheel speed, wheel specification, workpiece speed, dressing condition, etc.). The effect of the threshold grinding force on the size of ground workpiece is investigated. For the verification of this method, simulation results are compared with the experimental work.