• ALGAE
• /
• 제31권3호
• /
• pp.205-217
• /
• 2016

Freshwater red tides due to dinoflagellates have caused spectacular and regular “summer reddening” in recent years in Baishihai Lake, a temperate, meromictic, meso- or oligotrophic, high-altitude, landslide-dammed, deep lake located at the eastern edge of Tibetan Plateau in China. Based on morphological and molecular analyses, the causative organism has been identified as a new woloszynskioid dinoflagellate, Tovellia diexiensis Q. Zhang et G. X. Liu sp. nov. The vegetative cells are 20-32 μm long and 16-24 μm wide. They have a hemispherical episome and a broadly rounded hyposome with a short characteristic antapical spine. Usually cells are bright red due to the presence of numerous red-pigmented bodies, which often masked the yellowish green discoid chloroplasts. The amphiesma of motile cells comprise mainly quadrilateral, pentagonal or hexagonal thin plates, arranged in 4-5 latitudinal series on the episome, 1 in the cingulum and 4 on the hyposome. Molecular phylogenies based on small subunit ribosomal DNA and large subunit ribosomal DNA (LSU) indicate T. diexiensis from Baishihai Lake to belong to the family Tovelliaceae, which was monophyletic in our LSU phylogenies. During the bloom-forming period in 2005, cell density of T. diexiensis reached 9.15 × 10⁵ cells L⁻¹. Astaxanthin and its diester were found to be the major pigments in T. diexiensis, resulting in a characteristic blood-red color of the water in Baishihai Lake.

• 한국제4기학회지
• /
• 제4권1호
• /
• pp.15-26
• /
• 1990

한국 동해 대륙붕 표층 퇴적물은 대부분 육성기원 쇄설성 퇴적물로 이루어져있으며, 이 퇴적물은 홀로세 해수면 변동의 영향을 잘 나타내고 있다. 퇴적물은 연안이나 내대륙붕에서는 이질사 혹은 사닐니로 이루어져 있고 혹은 자갈들이 나타나는 경우도 있으며, 외해로 갈수록 세립화하는 경향을 보여 외대륙붕에는 대부분이 세립의 이질 퇴적물로 이루어져 있다. 그러나 수심 약 130-150m의 붕단 부근에서는 사질, 니질사, 역니질사 등의 조립 퇴적물이 나타나며 이들은 소위 위스콘신 빙하기의 해수면이 낮았을 때 수심이 얕은 연안환경에서 퇴적된 잔류퇴적물로 생각된다. 연구해역 대륙붕에서의 현생 퇴적물 분포는 파도나 해류 등에 의하여 연안이나 수십이 얕은 곳에는 세립퇴적물이 쌓이지 못한 것으로 생각되며, 특히 대마해류에서 분리된 동한난류는 남해로부터 동해 대륙붕으로 세립퇴적물을 운반하고 분포시키는 데 큰 영향을 미칠 것으로 추정된다.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.81-86
• /
• 2021

Purpose: This study was performed to assess and describe the imaging features of 40 cases of Stafne bone defects (SBDs) on computed tomographic (CT) examinations. Materials and Methods: This study collected data, including age and sex, from 40 patients with SBDs who underwent CT exams. The imaging features of the SBDs were assessed in terms of their location, average size, the relationship of their contour with the cortical plate of the lingual mandible, bone margins, degree of internal density, shape, topographic relationship between the defect and the mandibular edge, the distance from the SBD to the base of the mandible, and the Ariji classification (type I, II, and III). Results: The average age was 57.3 years(range, 28-78 years), and the patients were predominantly male (70%). In all cases (100%), the posterior unilateral lingual SBD variant was observed. Within the Ariji classification, type I was the most common (60%). Among the most frequently observed radiographic characteristics were thick sclerotic bone margin across the entire defect contour, completely hypointense internal content, an oval shape, and continuity with the mandibular base with discontinuity of the mandibular edge. Conclusion: This study showed that posterior SBDs could present with an oval or rounded shape, complete hypodensity, and thick sclerotic margins. Likewise, SBDs could appear almost anywhere, with minor differences from the classic SBD appearance. It is fundamental for dental practitioners to know the imaging features of SBDs, since they are diagnosed primarily based on imaging.

• 센서학회지
• /
• 제14권6호
• /
• pp.374-380
• /
• 2005

Vibration sensors have a wide scope of applications in the field of monitoring systems that needs to perceive an undesirable physical vibration before a critical failure occurs in a system, and then costly unplanned repairs can be avoided. The conventional vibration sensors developed so far have many disadvantages, such as complex manufacturing process, bulkiness, high cost, less reliability and so on. This paper reports a simple-structured vibration sensor, which has been developed using a commercialized conductive ball and silicon bulk-micromachining technology. The sensor consists of a conductive ball placed in $600{\mu}m$-deep micromachined silicon groove, in which Au thin film has been patterned using a shadow mask technique. Prior to the formation of the Au thin film, the sharp convex corner was rounded for smooth meatl deposition on the non-planar surface at the edge of the groove. The measurement results of the fabricated vibration sensor demonstrate a stable response characteristic to low-frequency vibration range ($1{\sim}30{\;}Hz$).

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.8-18
• /
• 2015

A numerical simulation for a nonslender BWB UCAV configuration with a rounded leading edge and span of 1.0 m was performed to analyze its aerodynamic characteristics. Numerical results were compared with experimental data obtained at a free stream velocity of 50 m/s and at angles of attack from -4 to $26^{\circ}$. The Reynolds number, based on the mean chord length, is $1.25{\times}106$. 3D multi-block hexahedral grids are used to guarantee good grid quality and to efficiently resolve the boundary layer. Menter's shear stress transport model and two transition models (${\gamma}-Re_{\theta}$ model and ${\gamma}$ model) were used to assess the effect of the laminar/turbulent transition on the flow characteristics. Aerodynamic coefficients, such as drag, lift, and the pitching moment, were compared with experimental data. Drag and lift coefficients of the UCAV were predicted well while the pitching moment coefficient was underpredicted at high angles of attack and influenced strongly by the selected turbulent models. After assessing the pressure distribution, skin friction lines and velocity field around UCAV configuration, it was found that the transition effect should be considered in the prediction of aerodynamic characteristics of vortical flow fields.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.158-163
• /
• 2002

This paper presents a multiple sensor system for rapid and high-precision coordinate data acquisition in the OMM (On-machine measurement) process. In this research, three sensors (touch probe, laser, and vision sensor) are integrated to obtain more accurate measuring results. The touch-type probe has high accuracy, but is time-consuming. Vision sensor can acquire many point data rapidly over a spatial range but its accuracy is less than other sensors. Also, it is not possible to acquire data for invisible areas. Laser sensor has medium accuracy and measuring speed among the sensors, and can acquire data for sharp or rounded edge and the features with very small holes and/or grooves. However, it has range- constraints to use because of its system structure. In this research, a new optimum sensor integration method for OMM is proposed by integrating the multiple-sensor to accomplish mote effective inspection planning. To verify the effectiveness of the proposed method, simulation and experimental works are performed, and the results are analyzed.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.70-76
• /
• 2000

2차원 순환 제어 날개 주위의 점성 유동을 수치적으로 해석하여 선박 해양 분야에 적용하기 위한 기초적 연구를 수행하였다. 지배 방정식으로는 2차원 비 압축성 RANS 방정식과 연속 방정식을 사용하였으며, 유한 차분법과 MAC법을 이용하여 이를 차분화 하였다. 또한, 압력 Poisson 방정식은 SOR 법을 이용하여 계산하였고, 모든 물리량이 격자점에 위치하도록 하였으며, 슬롯의 형상을 잘 표현하기 위해 격자계가 엇갈린 O형 비교차 중첩 격자계를 도입하였다. 코앤다 효과는 주로 난류 영역에서 나타나므로 수정된 Baldwin-Lomax 난류 모델을 도입하였다. 본 연구에서는 이러한 수치 계산 조직을 활용하여 뒷날이 원형으로 변형된 20% 두께의 타원 날개에 대한 코앤다 효과를 조사하기 위하여 분사 모멘텀을 달리 하며 시간에 따른 양 항력 특성의 변화를 계산하고, 그 결과를 실험치와 비교하여 잘 일치함을 보였다.

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.37-47
• /
• 1980

The purpose of this study was to investigate the stresses in different proximal margins and to measure, quantitatively, the effect of different modifications in the design of preparations on the stresses using two-dimensional photoelasticity. Photoelastic stress analysis is based on the phenomenon, exhibited by most transparent solids, of becoming birefringent, or doubly refracting, when strained. Two birefringent materials were used in this study, PSM-1 and PSM-5 in .standard sheet ($10'{\times}10'{\times}\frac{1}{4}'$ thickness), PSM-1(polyester) was used for constructing the substructure, and PSM-5(epoxy resin) was used in making the restorations to be investigated. Two birefringent materials were used in the construction of composite photoelastic model. Seven variable models were constructed. The peripheral dimensions of all model were constant and the models represent an occlusomesial section of a lower posterior molar. Model 1 represents the knife edge margin (shoulderless), Model 2 represents the chamfer, Model 3 represents a rounded shoulder(no sharp angle between the axial wall and gingival floor), Model 4 represents a flat shoulder (axial wall is a $90^{\circ}$ angle to the gingival wall), Model 5 represents $+15^{\circ}$ angulation, Model 6 has a $-15^{\circ}$ angulation, and Model 7 is the same as Model 4 except that it has a $45^{\circ}$ bevel. Improved artificial stone was used to represent dental cement in luting the composite photoelastic model. Static loading procedures(100 pounds) were used at preplanned sites. The results were as follows; 1. The stresses in the proximal portion of all tested models were compressive in nature when the proximal shoulders were loaded vertically on the same proximal marginal ridge. 2. The round and chamfered preparations were the optimum designs in proximoocclusal restorations. They showed the lowest stress concentration factor, i.e. 2.16 and 2.23, respectively. The knife edged shoulder had the highest value, K=5.39. Round type shoulder geometry experiments reduced the stress concentration factor (S.C.F.) 3. The gingival portion of proximal shoulder geometry was a critical location for stress concentration.

• Journal of Acupuncture Research
• /
• 제36권1호
• /
• pp.38-44
• /
• 2019

Background: The phrase "Nine Needles" refers to the 9 types of acupuncture needles describing their shapes, sizes, and uses in Huangdi's Internal Classic Ling-shu. The aim of this study was to present 3D illustrations of the "Nine Types of Needles" based on Huangdi's Internal classic Ling-shu, taking into consideration the conformation and application of the Nine Needles. Methods: Sketches of the "Nine Needles" were based on references to those needles cited in Huangdi's Internal Classic Ling-shu, the Great Compendium of Acupuncture and Moxibustion, and the Golden Mirror of Medicine. The computer programs Creo 3.0, Keyshot 5, Adobe Photoshop CS5, and Adobe Illustrator CS5 were used for 3D modelling and visualization. Results: Based on a review of Huangdi's Internal Classic Ling-shu, illustrations of the Spade needle, Round-Pointed needle, Pressure needle, Sharp-Edged needle, Sword-Shaped needle, Round-Sharp needle, Fine needle, Long needle, and Large needle, 3D models were created. The Spade needle had a sharp, large head, the Round-Pointed needle had an egg-shaped tip, and the Pressure needle had a blunt head like a grain of millet. The Sharp-Edged needle had a sharp blade with a triangular edge for bloodletting. The Sword-Shaped needle resembled a sword. The Round-Sharp needle resembled a horse's tail. The Fine needle and the Long needle had sharp points and thin bodies. The Large needle had a cylindrical shaft and rounded tip. Conclusion: This study demonstrated that 3D illustrations could be generated for the Nine Needles according to the descriptions and figures provided in the ancient literature.

• 대한수사과학회지
• /
• 제1권2호
• /
• pp.31-43
• /
• 2006

최근 살인사건의 실태를 보면 칼을 이용한 살인사건이 가장 많다. 살인을 음모하고 예견된 살인도 있지만, 순간적인 분노로 인한 우발적으로 저질러지기도 한다. 우발적인 범행에서 주변 가까이에 있는 가정용 칼을 범행에 사용하는 경우가 많지만 일상생활에서 칼의 위험성을 인식하는 경우가 드물다. 이에 전국에서 발생하는 살인사건의 범행방법 중 칼에 의한 범행에서 동기 분석과 함께 살해에 사용한 칼의 종류를 분석하였다. 그리고 칼에 대한 인식을 알아보고자 성인 남녀 500명을 대상으로 가정용 칼에 대한 21항목의 설문조사를 실시하였다. 그 결과를 일반 가정에서 사용하는 칼의 대부분이 칼끝이 날카로워 사실상 범행에 사용하기가 용이하였다. 그렇기 때문에 범인들이 칼을 휴대하기보다는 범행 장소에서 칼을 쉽게 구하여 범행에 사용하는 경우가 많다. 그리고 우발적인 살인의 경우에도 주방이나 식탁 또는 거실에서 칼을 쉽게 구할 수 있기 때문에 살인 사건이 더욱 빈발할 수 있다. 일반인의 칼에 대한 인식에서 칼의 위험도를 낮추기 위하여 칼끝을 둥글게 하자는 여론은 매우 높은 결과로 나타나지만 실제로 칼의 위험성에 대한 인식이 낮았다. 따라서 가정이나 가까운 사이에서 우발적 충동적인 살인을 예방하기 위하여 생활도구로 사용하는 칼도 위험한 물건으로 분류하여 인식전환과 함께 칼의 제작과 판매에 있어서 적절한 규제가 필요하다고 생각한다. 칼에 대한 인식을 새롭게 하여 가정에서 칼의 보관과 잠금장치의 필요성에 대한 홍보가 절실하다고 생각한다.