• 대한후두음성언어의학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 2000

Background and Objectives : Accent method is one of holistic approaches for behavior readjustment of voice therapy The aim of this study is to evaluate the efficacy of the accent method of voice therapy for the patients who have no improvement after LMS. Materials and Methods : Of the patients who had been undergone LMS during the period from Jan. 1999 to Dec. 1999, medical records of 38 patients who had not been improved were studied retrospectively. 19 patients(treatment group) were applied accent method and the other 19 patients(control group) refused voice therapy. The voice of all the patients of both group were analysed with CSL and Aerophone II programs in pre- and post operative period. The voice of treatment group were analysed with Visi-Pitch II program before the application of accent method and after the completion of accent method. Then, the results were compared using paired t-test. Results : The results of voice analysis were not different statistically between pre- and postoperative examination in both group. After application of accent method in the treatment group, fundamental frequency(F$_{0}$) of male, relative average pertubation, and shimmer were revealed significant differences(p＜0.01), and decrease in grade(G) scale and roughness(R) scale were statistically Important in perceptual analysis using GRBAS criteria(p＜0.01). But $F_0$ of female, maximal phonation time and S to Z ratio were not revealed significant differences. Conclusions : Accent method of voice therapy may be as a supplement- ary therapy in the patients who were not improved after surgery.

• 비파괴검사학회지
• /
• 제17권3호
• /
• pp.156-161
• /
• 1997

열 전달 효율을 증가시키기 위하여 튜브의 내 외면에 울퉁불퉁한 지느러미가 부착된 fin 튜브의 와전류탐상을 위하여 와전류 탐촉자를 설계하고 시험하였다. Fin 튜브는 거친 표면으로 인하여 와전류탐상으로 결함을 찾기 위해서는 많은 주의가 필요하다. 본 연구에서는 규격이 다른 와전류 탐촉자를 제작하고 인공 결함 시험편에 대하여 탐상을 실시하였다. 실험한 와전류탐상 신호에 대하여 FFT를 통하여 주파수 스펙트럼을 구하였고 디지털 필터링의 신호 처리를 하여 신호의 주파수 특성을 고찰하였다. 신호와 주파수 특성을 분석한 결과, 본 연구 대상 시험편에서와 같이 1mm 피치의 fin 튜브의 경우 4mm의 코일 거리를 지닌 탐촉자가 가장 좋은 S/N비를 나타내었다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.171-176
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$ and 270${\mu}{\textrm}{m}$, depth 124${\mu}{\textrm}{m}$, pitch 274${\mu}{\textrm}{m}$ was acquired by machining hard and brittle materials of WC, Silicon, Alumina with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120nm, 287nm in grooving WC. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of bottom curvatures was 7.75${\mu}{\textrm}{m}$. This results satisfies the specification for barrier ribs of 50 inch XGA PDP if the groove form of mold was fully transferred to the barrier ribs. Barrier ribs were formed with Silicone rubber mold, which is transferred from grooved hard materials. Silicone rubber mold has elasticity accommodating the waveness of lower glass plate of PDP.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.9-15
• /
• 2021

최근 반도체 소자의 소형화는 물리적 한계에 봉착했으며, 이를 극복하기 위한 방법 중 하나로 반도체 소자를 수직으로 쌓는 3D 패키징이 활발하게 개발되었다. 3D 패키징은 TSV, 웨이퍼 연삭, 본딩의 단위공정이 필요하며, 성능향상과 미세피치를 위해서 구리 본딩이 매우 중요하게 대두되고 있다. 본 연구에서는 대기중에서의 구리 표면의 산화방지와 저온 구리 본딩에 티타늄 나노 박막이 미치는 영향을 조사하였다. 상온과 200℃ 사이의 낮은 온도 범위에서 티타늄이 구리로 확산되는 속도가 구리가 티타늄으로 확산되는 속도보다 빠르게 나타났고, 이는 티타늄 나노 박막이 저온 구리 본딩에 효과적임을 보여준다. 12 nm 티타늄 박막은 구리 표면 위에 균일하게 증착되었고, 표면거칠기(R_q)를 4.1 nm에서 3.2 nm로 낮추었다. 티타늄 나노 박막을 이용한 구리 본딩은 200℃에서 1 시간 동안 진행하였고, 이후 동일한 온도와 시간 동안 열처리를 하였다. 본딩 이후 측정된 평균 전단강도는 13.2 MPa이었다.