• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.292-292
• /
• 2007

To apply PDP panel, Soda lime glass(SLG) is cheeper than Non-alkali glass and PD-200 glass but has problems such as low strain temperature and ion diffusion by alkali metal oxide. In this paper suggest the methode that prohibits ion diffusion by deposing barrier layer on SLG. Indium thin oxide(ITO) thin films and barrier layers were prepared on SLG substrate by Rf-magnetron sputtering. These films show a high electrical resistivity and rough uniformity as compared with PD-200 glass due to the alkali ion from the SLG on diffuse to the ITO film by the heat treatment. However these properties can be improved by introducing a barrier layer of $SiO_2\;or\;Al_2O_3$ between ITO film and SLG substrate. The characteristics of films were examined by the 4-point probe, SEM, UV-VIS spectrometer, and X-ray diffraction. GDS analysis confirmed that barrier layer inhibited Na and Ka ion diffusion from SLG. Especially ITO films deposited on the $Al_2O_3$ barrier layer had higher properties than those deposited on the $SiO_2$ barrier layer.

• Geomechanics and Engineering
• /
• 제38권3호
• /
• pp.215-229
• /
• 2024

Because of the various patterns of deep-water inrush and complicated mechanisms, accurately predicting mine water inflows is always a difficult problem for coal mine geologists. In study presented in this paper, the water inrush channels were divided into four basic water diversion structures: aquifer, rock fracture zone, fracture zone and goaf. The fluid flow characteristics in each water-conducting structure were investigated by laboratory tests, and multistructure and multisystem coupling flow analysis models of different water-conducting structures were established to describe the entire water inrush process. Based on the research of the water inrush flow paths, the analysis model of different water inrush space structures was established and applied to the prediction of mine water inrush inflow. The results prove that the conduction sequence of different water-conducting structures and the changing rule of permeability caused by stress changes before and after the peak have important influences on the characteristics of mine water-gushing. Influenced by the differences in geological structure and combined with rock mass RQD and fault conductivity characteristics and other mine exploration data, the prediction of mine water inflow can be realized accurately. Taking the water transmitting path in the multistructure as the research object of water inrush, breaking through the limitation of traditional stratigraphic structure division, the prediction of water inflow and the estimation of potentially flooded area was realized, and water bursting intensity was predicted. It is of great significance in making reasonable emergency plans.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.49-63
• /
• 2014

모래지반의 지표면에 위치한 거친 바닥면을 가진 강체 연속기초와 원형기초에 대하여 수치해석을 이용하여 팽창각 변화에 따른 지지력계수 $N_{\gamma}$와 형상계수를 구하였다. 양해법(explicit method)에 기반한 유한차분해석을 이용하여 지지력계수를 산정하기 위한 수치모델과 해석절차를 개발하고, Mohr-Coulomb 소성모델을 이용하여 다양한 내부마찰각(${\phi}$)과 팽창각(${\psi}$) 범위에 대하여 지지력계수를 도출하였다. 팽창각이 감소됨에 따라 지지력도 감소하는 것으로 나타났으며, 보편적인 지지력계수 제안식들이 가정하고 있는 관련흐름법칙(associated flow-rule)이 적용된 경우(${\psi}={\phi}$)를 기준으로 비관련흐름법칙(nonassociated flow-rule)이 적용된 경우(${\psi}$ < ${\phi}$)의 상대적인 지지력 비율을 산출하였고, 일반적인 모래에 대한 관계식을 제안하였다. 원형기초의 형상계수는 연속기초의 평면변형률 조건의 고려 여부에 따라 크게 변하였으며, 평면변형률 조건을 고려하여 내부마찰각을 증가시킨 경우가 기존의 실험 결과와 유사한 경향을 나타내었다. 형상계수 제안식들의 경향이 차이를 나타내는 원인에 대하여 고찰하고 설계시 적용 방안을 제시하였다.

• Applied Microscopy
• /
• 제23권1호
• /
• pp.56-76
• /
• 1993

To investigate the histogenesis of tracheal epithelium in Sprague-Dawley strain rat, the author has used the fetal rats at the 16th, 18th, 20th and 22nd prenatal day and neonatal rats at the 1st and 7th day as well as rats at age of 5, 10 and 15 weeks after birth as experimental animals. Specimens were double stained with uranyl acetate and lead citrate for electron microscopic study. The results obtained were as follows; 1. At the 16th day of gestational age, ciliated cells were found in tracheal epithelium and light and dark ciliated cells possessing numerous mitochondria and smooth endoplasmic reticulum in the cytoplasm at the 22nd day of gestational age of the rat are observed. 2. At the 16th day of gestataional age, basal cells lying upon the basement membrane and having large numbers of glycogen particles in the cytoplasm, were found and at the 22nd day of gestational age, basal cells possessing numerous polysomes in the cytoplasm were observed. 3. At the 20th gestational age of the rat, microvillous cells possessing many rough endoplasmic reticulum and mitochondria as well as microvilli protruding into the lumen were found in tracheal epithelium. 4. At the 5th week after birth brush cell having profound filamentous strands and many pinocytic vesicles in the cytoplasm, was visible in the tracheal epithelium. 5. At the 15th week after birth large proportions of tracheal epithelium were lined with ciliated cells. Cosequently it is suggested that pseudostratified ciliated columnar epithelium was differentiated at the 16th day of gestational age, in addition cytoplasmic organelles of the microvillous and basal cells were matured at the 20th and 22nd gestational age, respectively and most of the part of the tracheal epithelium was lined with ciliated cells at the 15th week after birth.

• Applied Microscopy
• /
• 제23권1호
• /
• pp.35-55
• /
• 1993

cis-Dichlorodiammineplatinum (II) (cis-Platin), a metallic compound, has widely been used as an effective anticancer chemotherapeutic agent. The precise mechanism of action of this agent is still unknown, but it is postulated that cis-Platin may act on the cancer cell like bifunctional alkylating agents. Although this agent is very beneficial to the patients with cervical cancer, germinoma of testis, neuroblastoma and others, it may also damage to the normal cell so that many side effects; severe hemorrhagic enterocolitis, bone marrow depression, renal damage and liver damage will develope. This experiment has been undertaken to pursue the cytotoxic effects of the cis-Platin on the ultrastructures of the interalveolar septum in the mouse lung. A total of 55 healthy male mice of ICR strain were used as experimental animals and divided into 5 mice of normal control group and 50 mice of cis-Platin treated group. The mice of cis-Platin treated group were sacrificed by carotid exsanguination at 6, 12, 24 hours, 3 days and 7 days after intraperitoneal injection of 6.0 mg of cis-Platin ($Abiplatin^R$ Abic Co. Ltd.) per kg of mouse body weight. The specimen obtained from the lower lobe of left lung were sliced into $1mm^3$ and prefixed with 2% glutaraldehyde -2.5% paraformaldehyde solution prepared with Millonig's phosphatae buffer solution (pH 7.4) at $4^{\circ}C$ for 3-4 hours. After postfixation with 1% osmium tetroxide solution all specimens were embedded in Epon 812. Ultrathin sections about $600-800{\AA}$ in thickness were stained with uranyl acetate and lead citrate and observed with Hitachi-600 electron microscope. The results obtained were as follows: 1. Local swellings with increase of electron density and number of pinocytic vesicles in the cytoplasms of the type I pneumocyte and endothelial cell of the blood air barrier in interalveolar septum of cis-platin treated mice were observed. 2. Cisternae of rough endoplasmic reticulum were dilated and sacculated in association with detachment of membrane bound ribosomes of the type II pneumocyte in interalveolar septum of cis-Platin treated mice. 3. Swollon mitochondria with uneven electron density of their matrix were observed in the type II pneumocyte of interalveolar septum in the cis-Platin treated mice. 4. The lamellae of lammelar bodies in type II pneumocyte of interalveolar septum in cis-Platin treated mice were devoided or transformed into homogeneous electron dense material. It is consequently suggested that cis-Platin would induce the cellular edema of type I pneumocyte and endothelial cell, and degenerative changes of cytoplasmic organelles of the type II pneumocyte in the interalveolar septum of the mouse lung.

• Parasites, Hosts and Diseases
• /
• 제22권2호
• /
• pp.259-266
• /
• 1984

원발성 아메바성 뇌수막염 (primary amoebic rneningoencephalitis; PAM)을 일으키는 자유생황아메바인 Svaegleria few입번를 사용하여 액체배지에서 무균적으로 배양된 영양형과 실험적으로 감염시켜 얻은 마우스 뇌조직에 존재하는 영 양형의 미세구조를 전자현미경을 이용하여 비교 관찰한 결과 다음과 같은 성적을 얻었다. 1. 마우스 뇌 조직내의 영양형은 다소 등근 모양인데 반해 액체배지에서 무균배양하여 엎은 영양형은 불규칙한 모양을 보였다. 2. 배 양기에서 얻은 아메바 세포질내 mitochondria 는 난원형, 구형 및 원통형 등 형태가 다양한데 마우스 뇌 조직내의 아메바에서는 이러한 형태 이외에 아령 모양이 특이하게 있었고 배양기내 아메바의 mitochondr심는 진하게 염색되나 마우스 뇌 조직내의 아메바에서 는 진한 것과 흐린 것이 모두 있었다. 3. 조면세포질내세망(rER)의 형태에 있어 마우스뇌조직내 아메바에서는 세관(microtubule)모양인데 비해 배 양기내 아에 바에서는 세관모양 이외에도 소낭(vesiole) 모양이 관찰된다. Ribosome은 배양기내 아메바에서는 free ribosome이 많은 반면 마우스 뇌조직내 아메바에서는 polysome이 많았다. 4. 배양기내 아메바에서는 내용물이 없는 액포(vacuole)가 많고 그 안에 미엘린양 구조가 존재함을 보앗다. 이것으로 아메바는 마우스 뇌조직내에서 강한 식작용을 나타냄을 알 수 있다. 5. Naegleria fowleri에 감염된 마우스 뇌조직은 괴사가 심하였다. 침윤된 염증세포로 다핵백혈구가 많았고, 아메바는 혈관 주위에 많았다.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• 한국균학회지
• /
• 제25권4호통권83호
• /
• pp.257-267
• /
• 1997

강원도 양양군 일원 야산의 뽕나무에서 자생하고 있는 상황버섯 형태의 자실체를 채집하고, 그 자실체로부터 Phellnus속의 한 균주를 분리동정하였으며, 액체배양에 의하여 분리 균사체의 대량생산을 위한 배양조건, 배지조성 및 배양장치의 영향을 조사하였다. 자실체는 표면이 검으며 거칠고, 갓의 안쪽은 황갈색으로 평평하였으며, 자실층이 두터웠고(5-7 cm), 말굽형으로 조직이 매우 단단하여 전형적인 상황버섯의 형태를 나타내었다. 또, 조직 일부를 water agar에 이식하여 순수분리한 결과, 분리된 균사체는 황갈색으로, PDA 평판배지에서 자갈색의 색소를 분비하였으며, 균사는 clamp connection을 형성하지 않았고, 많은 branch가 있었다. 또 laccase, tyrosinase 및 peroxidase activity를 가지고 있어, 본 균주는 Phellinus속의 한 균주로 확인되었다. 플라스크 배양에서 균사체 생성을 위한 최적배양조건은 접종비 5%(v/v), 배지액량 70 mL, 교반속도 150rpm, 초기 pH 6, 배양온도 $30^{\circ}C$ 및 배양기간은 8일이었다. 또, 반응표면분석에 의한 최적 배지조성은 glucose 12.12 g/L, sucrose 12.12 g/L, yeast extract 11.15 g/L, malt extract 11.15 g/L, $KH_2PO_4$ 0.855 g/L 및 $CaCl_2$ 0.855 g/L 이었으며, 배양 4일 및 8일 후 균사체량은 각각 1.95 및 9.89 g/L 이었고, 최대 비생육속도 $0.020\;hr^{-1}$, 생산성은 1.25 g/L/day이었다. 그러나 서로 다른 3종의 배양장치를 사용한 결과, 3 L air-lift fermentor에서 통기량 2.5 vvm으로 4일간 배양하였을 때, 약 7.5g/L의 균사체를 얻을 수 있었으며, 이때, 최대 비증식속도는 $0.033\;hr^{-1}$, 생산성은 1.9g/L/day로, 같은 기간내 플라스크 배양시 보다 각각 1.7 및 4.2배가 향상된 결과를 얻을 수 있었다.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.630-634
• /
• 2009

1995년에 내재해 다수성 특성을 지닌 "수원300호"를 모본으로, 조숙 호위축병저항성인 "하가네무기//CI08397/하가네무기"를 부본으로 인공교배하여 수량성이 높고 도복이 강한 우수 겉보리 계통 "익산407호"를 선발하였다. 2005년부터 3개년간 지역적응시험을 실시한 결과 답리작 적응성이 높으며, 광지역성으로서 수량성이 높고, 도복 등 재해에 강한 특성과 효소력가가 높은 계통으로 2007년 국립종자원에 "혜당"으로 출원하였다. 신 육성품종의 특성은 다음과 같다. 1. 6조 겉보리이며 파성은 III이며, 이삭의 밀도가 밀한 편이며 까락이 길지만 탈망성이 좋다. 2. 출수기와 성숙기는 전작, 답리작에서 대조품종보다 각각 3일 빠른 조숙종이다 3. 흰가루병은 올보리와 비슷하다. 보리호위축병에는 바이러스 strain이 I형인 나주와 IV형인 진주에서는 저항성을 나타내었으나 III형인 익산에서는 중정도의 저항성을 나타내었으며, 내한성과 내도복성은 올보리보다 다소 강하였다. 4. 간장(80 cm)은 올보리보다 8 cm 짧았으며, 수장은 약간 크고, $m^2$당 수수는 696개로 올보리보다 23개, 1수립수는 51개로 1개 많았으며, 천립중은 올보리보다 0.4 g 작은 대립종이며, 1L중은 다소 가벼웠다. 5. 단백질 함량과 ${\beta}$-glucan 함량은 올보리와 비슷하였고, 정맥률과, 입백도는 높았다. 엿기름의 효소력가는 올보리보다 30 DP 높았다. 6. 수량성은 올보리에 비해 전작(4.17 MT/ha)에서 23%, 답리작(4.27 MT/ha)에서 9% 각각 증수되었다.