• Advances in concrete construction
• /
• 제15권4호
• /
• pp.241-249
• /
• 2023

The unsteady mixed convection Casson type MHD nanofluid flow in the stagnation point with motile microorganism around a spinning sphere is investigated. Time dependent flow dynamics is considered. Similarity transformations have been employed to transfer the governing partial differential structure into ordinary differential structure. The impact of distinct parameters is examined via tables and graphs. The impact of rotational parameter (spin) on profiles of velocity profiles, temperature and concentration is revealed for unsteady mixed convection Casson type MHD nanofluid flow. It is observed that it is clear that rotational parameter has a great effect on non-dimensional primary velocity component but rotational parameter has a slight impact on non-dimensional secondary velocity component. The validity of the current investigation is authorized through comparing the existing outcomes with previous published literature.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.217-221
• /
• 2016

In this paper, a springboard for diving is analysed to find out how much force a diver should apply to reach specific height when the diver jumps. The springboard is presumed to Co-rotational plane cantilever beam(CR-beam), so EDISON program related to Co-rotational framework is used. The force of the person is supposed to sine function and the demanded height is fixed. Same velocity makes same height regardless of diver's weight. So, the velocity of springboard when the feet of a diver are separated from the springboard is a main factor of the analysis. The result shows that there is no association between deformation and weight and also between velocity and weight. That is, the required force to reach a optimal height is fixed whatever the diver's weight is.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1834-1839
• /
• 2003

Temperature and velocity distributions of hot air flows in rotational molding machines with two different shapes and structures of oven and inlet were investigated by using FLUENT, a commercial computational fluid dynamics code. The shape and structure of oven and inlet in current rotational molding machine were improved. Two different sizes of mold inside each oven were considered in the analysis. Temperature and velocity distributions of hot air flows in two different rotational molding machines were compared to each other. In order to reduce cycle time and improve product quality in current rotational molding machine, the improved shape and structure of oven and inlet were proposed.

• 국제물리치료학회지
• /
• 제9권4호
• /
• pp.1676-1682
• /
• 2018

The purpose of this study was to investigate the short-term effects of lumbar rotational mobilization under the single-leg standing (SLS) position. Fifteen healthy individuals were recruited, and randomized to agroup of trunk rotational exercise (TRE) and lumbar rotational mobilization (LRM). Trunk twist rotational exercise was performed to the TRE group, and mobilization was applied to the LRM group on the lumbar spine. Velocity of the center of pressure (VCOP) and center of pressure (COP) for each participant were measured through SLS. COPs were not significantly increased or decreased after treatment in both groups. VCOPs also did not change considerably except on the right side when the eye was closed. There was no significant difference between COPs and VCOPs in two groups. This study suggests that trunk rotation exercise and lumbar rotation mobilization would have similar effects on balance ability.

• 천문학논총
• /
• 제4권1호
• /
• pp.31-52
• /
• 1989

태양 주위에 있는 만기형 주계열성들의 자전속도 분포와 자전축의 기울기 분포를 조사하였다. 이를 위해 104개의 낱별들과 8개의 Ursa Major Group별들, 그리고 Hyades 성단에 속한 20개의 별들에 대해 각 별들의 자전주기와 반경을 구하였다. 먼저, 별의 자전주기는 대부분 Noyes et al.(1984)의 채충활성도-자전주기 관계식을 이용하여 구했고, 반경은 태양으로부터의 거리가 25pc 이내인 별들을 택해서 Stefan법칙으로 계산하였다. 자전주기와 반경으로부터 결정된 적도자전속도는 0.4<(B-V)<0.8인 별에서는 (B-V)가 증가함에 따라 급격히 감소하고, 기존의 시선자전속도 관측자료에서 이미 밝혀진 위쪽 경계가 나타남과 동시에 아래쪽으로도 자전속도 값의 명확한 경계가 나타났다. 한편, 적도자전속도와 주어진 시선자전속도 값을 비교함으로써 태양 주위에 있는 낱별들의 자전축의 기울기를 구할 수 있었는데, 계산된 기울기는 은위에 무관한 멋대로분포를 따른다는 것을 알 수 있었다.

• 한국게임학회 논문지
• /
• 제10권6호
• /
• pp.57-65
• /
• 2010

본 논문에서는 6자유도를 갖는 병렬형 기구의 출력 속도 공간에서 성능을 평가할 수 있는 지표를 제안하였다. Manipulability와 condition number에 기반을 둔 성능 지표가 단위계의 볼일치로 인한 물리적 의미의 결함이 없도록 출력공간을 병진속도 공간과 회전속도 공간으로 분리하는 방법을 제안하였다. 각 공간에서 단위 입력에 대용하는 mobility ellipsoid를 정의하여 이를 기반으로 병진운동 출력공간에서 두 종류 성능 지표와 회전운동 공간에서 두 종류의 성능 지표를 제안하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.861-866
• /
• 1996

The Non-Circular Gears is more advantage than other machinery using link and cam in the automation equipment. We designed Non-Circular Gears for a velocity of inequalty rotational equipment according to the variation of pressure angle, radius of curvature etc., and studied about pitch curve.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• 소성∙가공
• /
• 제7권4호
• /
• pp.340-346
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of the extruded products with elliptical shapes from round billet. The twisting of extruded product is caused by the lin-early increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product in creases with the die twisting angle, the aspect ratio of product the friction condition, the reduction of area, and decreases with the die length.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.