• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.187-194
• /
• 2013

The purpose of this study was to define the optimal boxthorn berries washing method for developing the boxthorn berries cleaner. We analyzed the rate of removal of residual pesticides according to washing methods; 1st - habitual washing method, 2nd - drum rotation washing method, 3th - drum rotation and air bubble washing method, 4th - drum rotation and nozzle spray washing method, 5th - drum rotation and air bubble and nozzle spray washing method. A rate of removal of residual pesticides of 88% was detected in the drum rotation and air bubble and nozzle spray washing method, and a rate of 82% was detected in the habitual washing method. The drum rotation and air bubble and nozzle spray washing method appeared to be the best good washing effect compared to the habitual washing method(about 6% compared to 82.0% higher). Clothianidin Triadimefon, Triforine ingredients, the drum rotation and air bubble and nozzle spray washing method efficiency was lower compared to the habitual washing method removal efficiency.

• Journal of Information Processing Systems
• /
• v.16 no.1
• /
• pp.120-131
• /
• 2020

In order to solve the problem of point clouds coordinate conversion of non-directional scanners, this paper proposes a basic Rodrigues rotation method. Specifically, we convert the 6 degree-of-freedom (6-DOF) rotation and translation matrix into the uniaxial rotation matrix, and establish the equation of objective vector conversion based on the basic Rodrigues rotation scheme. We demonstrate the applicability of the new method by using a bar-shaped emboss point clouds as experimental input, the three-axis error and three-term error as validate indicators. The results suggest that the new method does not need linearization and is suitable for optional rotation angle. Meanwhile, the new method achieves the seamless splicing of point clouds. Furthermore, the coordinate conversion scheme proposed in this paper performs superiority by comparing with the iterative closest point (ICP) conversion method. Therefore, the basic Rodrigues rotation method is not only regarded as a suitable tool to achieve the conversion of point clouds, but also provides certain reference and guidance for similar projects.

• Journal of TMJ Balancing Medicine
• /
• v.2 no.1
• /
• pp.8-12
• /
• 2012

Objectives: It has been reported to continue that temporomandibular joint balancing medicine (functional cerebrospinal therapy; FCST) is effective in treating incurable diseases in clinic recently. FCST is based on the results of restricted cervical rotation test, it means that the results of restricted cervical rotation test has a very high reliability on test results. Methods: This study has the aim to understand restricted cervical rotation test method and to use well with high technical skill. So manual muscle test method which was based on the upper limb lifting resistance test method are compared with restricted cervical rotation test method and had been discussed. Results: Results are that restricted cervical rotation test by using the passive motion of arrested persons (patients) have high the reliability and accuracy. Conclusions: It is concluded that restricted cervical rotation test is the new type of manual muscle tests and the results of test are very high the reliability and accuracy so that the acquirement of test method is helpful in clinic practically.

• The Journal of Korea Robotics Society
• /
• v.6 no.3
• /
• pp.247-254
• /
• 2011

This paper presents a method of sonar grid map matching for topological place recognition. The proposed method provides an effective rotation invariant grid map matching method. A template grid map is firstly extracted for reliable grid map matching by filtering noisy data in local grid map. Using the template grid map, the rotation invariant grid map matching is performed by Ring Projection Transformation. The rotation invariant grid map matching selects candidate locations which are regarded as representative point for each node. Then, the topological place recognition is achieved by calculating matching probability based on the candidate location. The matching probability is acquired by using both rotation invariant grid map matching and the matching of distance and angle vectors. The proposed method can provide a successful matching even under rotation changes between grid maps. Moreover, the matching probability gives a reliable result for topological place recognition. The performance of the proposed method is verified by experimental results in a real home environment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.267-271
• /
• 2002

The Hotelling transform is based on statistical properties of an image. The principal uses of this transform are in data compression. The basic concept of the Hotelling transform is that the choice of basis vectors pointing the direction of maximum variance of the data. This property can be used for rotation normalization. Many objects of interest in pattern recognition applications can be easily standardized by performing a rotation normalization that aligns the coordinate axes with the axes of maximum variance of the pixels in the object. However, this transform can not be used to rotation normalization of color images directly. In this paper, we propose a new method for rotation normalization of color images based on the Hotelling transform. The Hotelling transform is performed to calculate basis vectors of each channel. Then the summation of vectors of all channels are processed. Rotation normalization is performed using the result of summation of vectors. Experimental results showed the proposed method can be used for rotation normalization of color images effectively.

• Design & Manufacturing
• /
• v.18 no.2
• /
• pp.29-34
• /
• 2024

This study intends to reduce forming load by adding die rotation to flange-upsetting process. Materials arc formed by the compression and rotational torque which are accrued from rotation of the lower die accompanied by axial compression of the punch. For the theoretic analysis of flange-upsetting process using rotation die, slab method was used. Furthermore, for the verification of the theoretic analysis results, FEM simulation using DEFORM 3D a commercial software was done, and through the model material experiment using Prasticine, the results were compared and reviewed. Flange-upsetting process using rotation die shows reduced forming load compared with process without die rotation and demonstrates uniform distribution of strain. And as for the effect of the reduction of forming load, the less the aspect ratio(h₀/d₀) and the greater friction coefficient, the greater effect is. With increase in die rotation velocity, the effect of forming load reduction also increases little by little, but its effect on forming load reduction is very negligible compared with other forming parameters. Theoretic analysis results and simulation results coincided pretty well. The flange-upsetting process using die rotation are evaluated as useful process that can produce reduction of forming load and uniform strain.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.145-151
• /
• 1994

Welded connections have been designed on basis of allowable stresses, wherein the response to loading is assumed to be totally elastic. This is the vector analysis method, which resolves the stresses determined from the direct stress formula and the torsion formula into a vector combination to obtain a solution. It has been known that this method gives conservative answers and typically a very high factor of safety. An analytical method based on the Instantaneous Center of Rotation has been developed which predicts the ultimate strength of an eccentically loaded fillet welded connection. The method of Instantaneous Center of Rotation results in weld resistance capacities greater than the vector analysis method, by recognizing the variation in fillet weld strength with respect to the direction of the applied loading and actual load-deformation response of elemental fillet welds. The procedure of numerical analysis is iterative and complex. The relations between vector analysis method and the method of Instantaneous Center of Rotation on eccentrical distance subjected to variation of load direction are presented in this paper. Considering of the effects on configuration of weld groups, the method of Instantaneous Center of Rotation are provided a more exact results of the numerical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.692-699
• /
• 2004

In this paper we studied an implementation of QR decomposition-based RLS algorithm using modified Givens rotation method. Givens rotation can be obtained with a sequence of the CORDIC operations. In order to reduce the computing time of QR decomposition we restricted the number of iterations of the CORDIC operation per a Givens rotation and used double-rotation method to remove the square-root in the scaling factor.

• The Journal of Korean Physical Therapy
• /
• v.34 no.6
• /
• pp.283-291
• /
• 2022

Purpose: The purpose of this study was to compare and analyze the method of measuring the angle of the trunk rotation using a smartphone with 3D smartphone holder compared to a scoliometer, which is a measuring tool used as a method for diagnosing scoliosis in scoliosis patients. Methods: Angle of trunk rotation was measured in 21 subjects diagnosed with scoliosis. scoliometer measurement method, a smartphone measurement method with a 3D smartphone holder, a smartphone blind measurement method with a 3D smartphone holder, a smartphone measurement method without a smartphone holder, a smartphone blind measurement method without a smartphone holder, and a total of five measurement methods were repeated three times for comparison and analysis. Results: The smartphone measurement method with a 3D smartphone holder has excellent intra-rater reliability of angle of trunk rotation (Rater A; ICC3, 2≥0.993, Rater B; ICC3, 2≥0.992). The smartphone blind measurement method with a 3D smartphone holder has excellent inter-rater reliability of angle of trunk rotation (ICC2, 2≥0.968). The scoliometer measurement method had the highest validity (r=0.976) with the smartphone measurement method with a 3D smartphone holder, and the blind measurement method without a smartphone holder had the lowest validity (r=0.886). Conclusion: These findings, the angle of trunk rotation measured by the smartphone measurement method with a 3D smartphone holder in scoliosis patients showed high reliability and validity compared to the scoliometer measurement method.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.20-26
• /
• 2021

In this paper, we studied the rotation angle estimation methods required for image alignment in an image recognition environment. In particular, a rotation angle estimation method applicable to a low specification embedded-based environment was proposed and compared with the existing method using complex moment. The proposed method estimates the rotation angle through similarity mathcing of the 1D projection profile along the radial axis after converting an image into polar coordinates. In addition, it is also possible to select a method of using vector sum of the projection profile, which more simplifies the calculation. Through experiments conducted on binary pattern images and gray-scale images, it was shown that the estimation error of the proposed method is not significantly different from that of complex moment-based method and requires less computation and system resources. For future expansion, a study on how to match the rotation center in gray-scale images will be needed.