• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.67-73
• /
• 2006

This investigation deals with the spin-up flows in a circular container of aspect ratio, 2.0. Shear front is generated in the transient spin-up process and propagating from the side wall to the central axis in a rotating container. Propagation of the shear front to the axis in a rotating container means the region acquires an angular momentum transfer from the solid walls. Propagating speed of the shear front depends on the apparent viscosity of polymer solution. Two kinds of polymer solutions are considered as a working fluid: one is CMC and the other is CTAB solution. CMC solution has larger apparent viscosity than that of water, and CTAB shows varying apparent viscosities depending on the applied shear rates. Transient and spatial variations of the apparent viscosities of the present polymer solutions (CTAB and CMC) cause different speeds of the propagating shear front. In practice, CMC solution that has larger values of apparent viscosity than that of water always shows rapid approach to the steady state in comparison of the behavior of the flows with water. However, for the CTAB solution, the speed of the propagating of the shear front changes with the local magnitude of its apparent viscosity. Consequently, the prediction of Wedemeyer's model quantitatively agrees with the present experimental results.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1889-1896
• /
• 2003

In the microfluidic applications, viscous-driven pumping mechanism is a promising one since the viscous effect increases significantly as the size of device decreases, relative to the inertial effect. However, there exist a few drawbacks we have to improve such as low efficiency and small volume flow rate. In the present study, an optimum design synthesis is proposed to enhance the performance characteristics of the micropump with single rotating cylinder. First, the unstructured grid CFD method is described and validated by comparing its results to the previous results. Next, an automated optimum design synthesis tool is constructed by combining the aforementioned CFD analysis model with the mathematical optimization model. This technique is used to improve the performance characteristics of newly designed viscous-driven pump. The presented results show that the fluid dynamic optimization tool is robust and may be applied to other microfluidic device design applications.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.76-84
• /
• 2009

The vibration and stability of thin, flexible corotating disks in an enclosed compressible fluid is investigated analytically and compared with the results of a single rotating disk. The discretized dynamical system of the corotating disks is derived in the compact form of a classical gyroscopic system similar with a single disk. For the undamped system, coupled structure-acoustic traveling waves destabilize through mode coalescence leading to flutter instability. However, it is found that the flutter regions of the corotating disks are wider than those of a single disk. A detailed investigation of the effects of dissipation arising from acoustic or disk damping is also performed. Finally, in the presence of both acoustic and disk dampings, the instability regions are found and compared with those of a single disk. Although this study does not allow a radial clearance between the disk and the enclosure, the computational frame work of the problem can be expanded to the system having the radial clearance in an enclosure.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.46-52
• /
• 2014

This study suggests a small-sized screw decanter specialized for dredging sites. Generally, conventional screw decanters are composed of a cylinder and a cone. However, the suggested screw decanter simply has a cone based on a cone-type bowl structure. In this research, a commercial analysis tool is used to establish an optimal design for the bowl and the screw conveyor. Moreover, the base frame, where the main bearings that support the spindle of the bowl and the screw conveyor are installed, is optimally designed considering the weight of the rotating body and the deflection caused by the high centrifugal force. Furthermore, the natural frequency range of the spinning body, the bowl and the screw conveyor, is applied to this base frame; it is designed not to correspond to the resonance frequency range and achieves stability as a result. This study suggests an optimal design for the rotating body and the base frame of a screw decanter considering its vibration characteristics. Such a design will prevent overuse of materials and help to reduce the weight and volume-and the price-of a screw decanter.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1044-1051
• /
• 1989

본 연구에서는 Wu가 제시한 수학적 모델에 기초를 둔 비점성 준3차원 유동해 석에 실제 유체의 점성효과 및 2차유동 등에 의해 발생하는 손실들을 손실모델로 반영하여 그 타당성 유무를 검토하는 데 목적을 두었다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.50-55
• /
• 2021

Solar power generation, which is one of the methods of using solar energy, has a high possibility of practical implementation compared to other renewable energy power generation, and it has the characteristic that it can generate as much power as needed in necessary places. In addition, maintenance is easy, unmanned operation is possible, and power management can be performed more efficiently if operated in a hybrid method with existing electric energy. Therefore, in this study, numerical analysis using a computer program was performed to analyze the efficient operation and performance improvement of solar energy of the rotating condensing type solar LED street lamp. As a result, the two-axis tracking type could obtain 15.23 % more electricity per year than the fixed type, and additional auxiliary power generation was required for the fixed type by 19 % per year than the tracking type. As a result of computational fluid dynamics(CFD) simulation for PV module surface temperature prediction, the The surface temperature of the Photovoltaics(PV) module incident surface was predicted to be about 10℃ higher than that of the fixed type.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.426-434
• /
• 2021

In this paper, three-dimensional unsteady computational fluid dynamic(CFD) analyses based on overset grid technique have been performed for a hand-launched unmanned aerial vehicle(UAV) considering the wake effect generated by a rotating propeller. In addition, the defection of rudder is considered in order to consider to predict the equilibrium condition of yawing moment during cruise flight conditions. It is importantly shown in this paper that the wake interference effect of the propeller is significant to accurately predict the yawing moment of the UAV and the yawing moment coefficient corresponding to a flight speed can be different because of its different amount of wake effect due to the different rotating speed of the propeller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.750-757
• /
• 2005

The objective of this study is an understanding of the effect of inlet flow angle on the output power performance of a Francis hydraulic turbine, An optimum induced angle at the inlet of the turbine is one of the most important design parameters to have the best performance of the turbine at a given operating condition, In general. rotating speed of the turbine is varied with the change of water mass flowrate in a volute, The induced angle of the inlet water should be properly adjusted to the operating condition to have maximum energy conversion efficiency of the turbine, In this study. a numerical simulation was conducted to have detail understanding of the flow phenomenon in the flow path and output power of the model Francis turbine. The indicated power produced by the model turbine at a given operating condition was found numerically and compared to the brake power of the turbine measured by experiment at KIER. From comparison of two results, turbine efficiency or energy conversion efficiency of the model turbine was estimated. From the study, it was found that the rotating power of the turbine linearly increased with the rotating speed. It means that the higher volume flow rate supplied. the bigger torque on the turbine shaft generated. The maximum brake efficiency of the turbine is around 46$\%$ at 35 degree of induced angle. The difference between numerical and experimental output of the model turbine is defined as mechanical efficiency. The maximum mechanical efficiency of the turbine is around 93$\%$ at 25$\∼$30 degree of induced angle.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.850-858
• /
• 2002

The present study investigates in detail the combined effects of the Coriolis force and centrifugal force on the development of turbulent flows in a square-sectioned U-bend rotating about an axis parallel to the center of bend curvature. When a viscous fluid flows through a curved region of U-bend, two types of secondary flow occur. One is caused by the Coriolis force due to the rotation of U-bend and the other by the centrifugal force due to the curvature of U-bend. For positive rotation, where the rotation is in the same direction as that of the main flow, both the Coriolis force and the centrifugal force act radially outwards. Therefore, the flow structure is qualitatively similar to that observed in a stationary curved duct. On the other hand, under negative rotation, where these two forces act in opposite direction, more complex flow fields can be observed depending on the relative magnitudes of the forces. Under the condition that the value of Rossby number and curvature ratio is large, the flow field in a rotating U-bend can be represented by two dimensionless parameters : $K_{TC}$ =Re $\sfrac{1}{4}$√λand a body force ratio F=λ/Ro. Here, $K_{TC}$ has the same dynamical meaning as $K_{TC}$ =Re√λ for laminar flow.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.282-290
• /
• 2013

The effects of the combination of blade number for forward and after propeller on the propeller shaft forces of a contra-rotating propeller (CRP) system are presented in the paper. The research is performed through the numerical simulations based on the Reynolds-Averaged Navier-Stokes equations (RANS). The simulation results of the present method in open water condition are validated comparing with the experimental data as well as the other numerical simulation results based on the potential method for 4-0-4 CRP (3686+3687A) and 4-0-5 CRP (3686+3849) of DTNSRDC. Two sets of CRP are designed and simulated to study the effect of the combination of blade number in behind-hull condition. One set consists of 3-blade and 4-blade, while the other is 4-blade and 4-blade. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. From the simulation results, the fluctuations of axial force and moment are dominant in the case of same blade numbers for forward and after propellers, whereas the fluctuations of horizontal and vertical forces and moments are very large in the case of different blade numbers.