• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.883-888
• /
• 2010

This study have goal with conceptual design for Offshore Structures of high pressure control valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the Offshore Structures high pressure control valve. Numerical simulation using CFD (Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the glycerin (C3H8O3). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated until increasing 1bar to 10bar. CFD analysis used STAR-CCM+ which is commercial code and Governing equations were calculated by moving mesh which is rotated 90 degrees when ball valve operated opening and closing in 1 degree interval. The result shows change of mass flow rate according to opening and closing angle of valve, Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. Relation with flow and flow coefficient can not be proportional according to inlet pressure when compare with mass flow rate. Because flow coefficient have influence in flow and pressure difference. Namely, flow can be change even if it has same Cv value. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1195-1200
• /
• 2008

This study have goal with conceptual design for Offshore Structures of high pressure control valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the Offshore Structures high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the glycerin($C_3H_8O_3$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated until increasing 1bar to 10bar. CFD analysis used STAR-CCM+ which is commercial code and Governing equations were calculated by moving mesh which is rotated 90 degrees when ball valve operated opening and closing in 1 degree interval. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. Relation with flow and flow coefficient can not be proportional according to inlet pressure when compare with mass flow rate. Because flow coefficient have influence in flow and pressure difference. Namely, flow can be change even if it has same Cv value. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• 전산구조공학
• /
• 제10권2호
• /
• pp.255-263
• /
• 1997

실제로 구조시스템들의 최적설계는 설계변수가 연속값이 아닌 이산값을 요하는 경우가 대부분이다. 본 논문은 이산형 설계변수를 갖는 비대칭 복합 적층평판에 대해 선형 근사화방법을 이용한 이산최적설계를 수행하였으며, 이 방법이 매우 효율적임을 보였다. 대상 문제는 축력, 전단력, 그리고 휨과 비틀림 모멘트의 평면 내하중들(in-plane loads)의 다중하중조건을 받는 것으로 고려하였으며, 복합 적층평판을 구성하는 플라이들에 대한 최대변형률 규준을 설계 제약조건으로 부과하였다. 이산 최적화를 위한 초기 접근방법으로 단 한번의 연속변수 최적화 과정이 FDM(Feasible Direction Method)을 이용하여 수행되었으며, 차후 이산 및 연속변수를 포함하는 비선형 이산최적화문제를 SLDP(Sequential Linear Discrete Programming)방법에 의해 선형 근사화된 혼합정수계획문제로 형성하여 풀었다. 수치예에서 6개의 플라이로 구성된 비대칭 복합 적층평판을 대상으로 회전식 적층배열([(90-.theta.)/-(60+.theta.)/-.theta./-(45+.theta.)/(45-.theta.)]/sub s/)에 따른 이산최적해를 구하였다. 효율성 입증을 위해 똑같은 문제를 비선형 분기한계법을 이용하여 풀었으며, 그 결과를 비교 분석하였다.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.223-230
• /
• 2014

본 논문에서는 FSI해석을 이용하여 비정형 초고층 빌딩의 풍응답 특성을 연구하였다. 해석모델은 Twist모델이며, 뒤틀림 각도와 풍가속도의 상관관계에 대해 연구 중점을 두었다. 먼저 단방향 해석을 수행하여 100년 재현주기 풍속에 대한 최대 횡 변위를 구하고, 제한조건을 만족하는 탄성계수를 산출한다. 그리고 양방향 해석을 수행, 시간이력해석을 통해 산출된 탄성계수와 임의의 밀도를 가지는 풍가속도를 예측하게 된다. 정방형 모델은 높이 400m, 변장비 1:1, 세장비 8로 설정, 뒤틀림 모델은 0도에서 90도까지 15도 간격으로, 90도에서 360도까지 90도 간격으로 비틀어 회전시켰다. 형상에 따른 풍가속도 예측 결과, 정방형 모델이 뒤틀림 모델보다 크게 산출되어 풍진동 영향에 더 민감한 것을 검증하였다.

• 에너지공학
• /
• 제25권2호
• /
• pp.21-28
• /
• 2016

본 연구는 국내 상업용 대형 가스오븐 시스템 개발을 목표로 연소기의 연소조건에 대한 수치해석 및 실험을 통해 적정 당량비를 결정한 후 공급열량(20,000 kcal)에 적합한 열교환기를 설계하고 대류 팬 제어방법을 검토하여 상업용 대형 가스오븐 시스템 설계 및 최적운전조건을 도출하는 것이다. 실험결과 당량비는 0.82가 가장 적절하였고 오븐 내부 중앙지점의 온도가 $200^{\circ}C$까지 도달하는데 걸리는 시간은 대류 팬의 회전방향이 반시계방향일 때 시계방향 보다 단축되었다. 또한 오븐 내부의 온도를 균일하게 유지하기 위해서는 대류 팬 제동장치가 필요하였다. 오븐 내부의 승온구간과 온도유지구간 동안 배출되는 배기가스의 열량을 통해 시스템 효율을 비교한 결과 전열면적이 큰 열교환기를 설치한 시스템의 효율이 높게 나타났다.

• Journal of Animal Science and Technology
• /
• 제65권3호
• /
• pp.638-651
• /
• 2023

The objective of this study was to quantitatively estimate the level of grazing area damage in outdoor free-range pig production using a Unmanned Aerial Vehicles (UAV) with an RGB image sensor. Ten corn field images were captured by a UAV over approximately two weeks, during which gestating sows were allowed to graze freely on the corn field measuring 100 × 50 m². The images were corrected to a bird's-eye view, and then divided into 32 segments and sequentially inputted into the YOLOv4 detector to detect the corn images according to their condition. The 43 raw training images selected randomly out of 320 segmented images were flipped to create 86 images, and then these images were further augmented by rotating them in 5-degree increments to create a total of 6,192 images. The increased 6,192 images are further augmented by applying three random color transformations to each image, resulting in 24,768 datasets. The occupancy rate of corn in the field was estimated efficiently using You Only Look Once (YOLO). As of the first day of observation (day 2), it was evident that almost all the corn had disappeared by the ninth day. When grazing 20 sows in a 50 × 100 m² cornfield (250 m²/sow), it appears that the animals should be rotated to other grazing areas to protect the cover crop after at least five days. In agricultural technology, most of the research using machine and deep learning is related to the detection of fruits and pests, and research on other application fields is needed. In addition, large-scale image data collected by experts in the field are required as training data to apply deep learning. If the data required for deep learning is insufficient, a large number of data augmentation is required.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.175-181
• /
• 2016

Objective: The aim of this study was to investigate age-related changes of multi-finger synergy during a constant force production task with and without an additional mechanical constraint. Method: Fourteen elderly subjects (age: $78.50{\pm}4.63yrs$, height: $157.29{\pm}8.97cm$, weight: $65.13{\pm}6.93kg$) and 14 young subjects (age: $21.13{\pm}1.35yrs$, height: $171.57{\pm}8.43cm$, weight: $70.29{\pm}16.77kg$) participated in this study. The subjects were asked to place their index and middle fingers on two force transducers fixed on a small non-moving teeterboard and produce 10 N by pressing the sensors while watching force feedback on a computer screen under the no additional constraint condition (NAC). The subjects also performed the same task with an additional mechanical constraint (AC) where the subjects were asked to balance a teeterboard that could be rotated by finger forces. An uncontrolled manifold approach was used to calculate within-trial and between-trial multi-finger synergy indices, variance in uncontrolled subspace ($V_{UCM}$), and variance in subspace orthogonal to UCM subspace ($V_{ORT}$). Two-way repeated measured ANOVA was performed with the within-factor of task condition (with and without an additional constraint) and the between factor of groups (elderly and young). Results: The elderly group showed significantly increased within-trial $V_{ORT}$ in AC compared with NAC (p < .05) while the young group showed no significant difference between AC and NAC. There was no significant group difference for within-trial $V_{UCM}$. Between-trial $V_{ORT}$ remained unchanged between groups and conditions. However, between-trial $V_{UCM}$ for the elderly group significantly decreased in AC as compared to NAC, along with no significant difference for the young group. For multi-finger synergy, there was no significant group difference of within-trial synergy. However, between-trial synergy for the elderly group significantly decreased in AC as compared to NAC (p < .05). Conclusion: Our results indicate that aging decreased consistency (i.e., ability to perform the task on a moment-to-moment basis) with an additional mechanical constraint. In addition, aging was associated with decreased multi-finger synergy on a trial-to-trial basis.

• 한국화재소방학회논문지
• /
• 제24권5호
• /
• pp.32-38
• /
• 2010

실규모 ISO 9705 표준 화재실에서 환기조건 변화에 따른 다차원 화재거동에 관한 수치해석적 연구가 수행되었다. 선행된 실험과 동일한 조건에 대하여 FDS(Fire Dynamic Simulator)가 사용되었다. 과환기화재 및 환기부족화재의 발생을 위하여 연료 유량과 출입구의 폭이 변화되었다. 주요 결과로서, 환기부족화재의 내부 유동패턴은 과환기화재와 비교할 때 반대방향을 갖으며, 그 결과 다량의 고온 생성물이 구획내부에서 재순환되는 매우 중요한 특징을 확인하였다. 환기조건에 따른 유동패턴의 변화는 구획 내부에서 고온 생성물의 체류시간을 크게 변화시키며, CO 및 그을음의 복잡한 생성과정에 큰 영향을 미칠 수 있다. 환기부족화재는 구획 내부의 열 및 유동구조 뿐만 아니라 화학종의 분포에 관하여 매우 복잡한 3차원 구조를 생성하였다. 특히, 구획 내부의 측면에서 추가적인 반응은 유동패턴 및 CO 생성에 매우 큰 영향을 주고 있다. 복잡한 CO의 분포는 3차원 산소 농도의 분포 및 유동 패턴을 통해 체계적으로 분석되었다. 위 결과로 부터 고온 상층부에서 측정된 국부 화학종 농도는 구획 내부의 화재특성을 규명하는데 많은 한계가 있음을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.1795-1801
• /
• 2009

본 연구는 태양광과 자가발전을 이용한 휴대가능한 손전등 기술로서 전기를 사용할 수 없는 극한 상황에서 수동으로 자가발전을 할 수 있도록 구성하였다. 주간에는 태양전지를 이용하여 배터리를 충전시키고, 태양광을 이용 할 수 없는 경우에는 손잡이를 회전하여 전기를 발전시켜 배터리를 충전하도록 구성하였다. 빛의 밝기를 개선하기 위해 광학 렌즈를 이용하여 빛을 집광시켜 빛의 밝기를 개선하며, 저소비전력 회로를 구성하여 램프 방전 시, 소비전력을 억제하여 장기간 사용이 가능하도록 하였다. 배터리 충전 및 외부 휴대용 기기를 충전하기 위한 안정적인 정전압/정전류 회로를 구성하여 안정적인 충전이 이루어지도록 하였다. 배터리 장기간 사용하지 않는 경우, 배터리의 과방전이 이루어지지 않도록 과방전 회로를 구성하고, 과충전이 이루어지지 않도록 보호회로를 장착하였다. 또한 가정용 아답터를 이용하여 상시 충전이 가능하도록 하였다. 이와 같은 결과로 자가발전 손전등을 구현하였으며, 평상 시 주간에는 태양광으로 충전이 가능하며, 또한 가정용 사용전원으로 충전이 가능하도록 구현하였다. 그리고 광학 렌즈기술을 적용하여 빛의 밝기가 극대화되어 원거리 조사기능이 가능하며, 야간에도 독서가 가능한 백색 자연광을 발산하도록 구현하였다.

• 한국치위생학회지
• /
• 제10권3호
• /
• pp.523-530
• /
• 2010

Objectives : In order to provide basic data necessary for developing oral health education plane for school continued oral health education by understanding knowledge and activities of oral health. Methods : This study was performed against 324 students at 5th grade of 2 elementary schools in Iksan-si, Jellabuk-do selected through convenience sampling, who were in mixed dentition period that might experience dental caries of permanent tooth. Results : As results, For the knowledge level on oral health by questions, it was found that the case that the elementary school students had correct knowledge on oral health was 'chocolates, snacks, and candies were foods that might often cause dental caries' and 95.8% of the students recognized it well. It was found that for 'must do toothbrushing before going to bed', 'during toothbrushing, I clean my tongue', and 'Proper time necessary for toothbrushing is about 3 minutes', 89.3%, 93.2%, and 89.3% of the students knew the, respectively. When oral health knowledge level by groups was divided into 3 groups and observed, they were classified into Low (0-4 points), Mid (5-7 points), and High (8-10 points). It was found that the knowledge level of each group was High 64.1%, Mid 33.9%, and Low 2.0% and it was identified that the high group took the largest ratio. It was suggested also for oral health knowledge level depending on their father's academic background that there was a statistically significant difference in the group higher than university graduate(p<.05). It was found for oral health knowledge level depending on parents' dental condition that an answer that both parents were good was high and there was a statistically significant difference. But post-analysis resulted that there was no apparent difference among groups. It was found that the ratio of respondents who answered for toothbrushing method 'toothbrush should be moved and rotated downward for the upper teeth and upward for the lower teeth to clean the teeth and gum' were 33.2% of male students and 29.4% of female students and showed statistically significant difference (p<0.05). It was found also that the ratio of respondents who answered to use a toothbrush for about 3 months' were 29.4% of male students and 25.5% of female students and showed statistically significant difference (p<0.05). Conclusions : Oral health program through the elementary school students and their parents for the development of proper oral health care education programs continue to be made should be considered.