• 한국안전학회지
• /
• 제32권4호
• /
• pp.107-113
• /
• 2017

This paper deals with the traffic factors related to the collisions of circular intersections. The purpose of this study is to develop traffic accident models by type of collision based on land use. In pursuing the above, the traffic accident data from 2010 to 2014 were collected from the "Traffic Accident Analysis System (TAAS)" data set of the Road Traffic Authority. A multiple regression model was utilized in this study to develop the traffic accident models by type of collision. 17 explanatory variables such as geometry and traffic volume factors were used. The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents by type of collision is rejected. Second, 10 accident models by type of collision based on land use are developed, which are all statistically significant. Finally, the ADT, inscribed circle diameter, bicycle lane, area of central island, number of speed hump, circulatory roadway width, splitter island, area of circulatory roadway, mean number of entry lane and mean width of entry lane are analyzed to see how they affect accident by type of accident based on land use.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.44-55
• /
• 2017

Background: Heat recovery is one of the prominent ways to save a considerable amount of conventional fossil fuel and minimize its adverse effects on the environment. The rotary heat exchanger is one of the most effective and efficient devices for heat recovery or heat exchanging purposes. It is a regenerative type of heat exchanger, which has been studied and used for many heat recovery purposes. However, regenerative thermal wheels have been mostly used as heat recovery systems in buildings. For modeling a rotary regenerator, it is very important to numerically consider all the factors involved, such as effectiveness, rotational speed, geometrical size and shape, and pressure drop (${\Delta}p$). In recent times, several researchers have actively studied the rotary heat exchangers, both theoretically and experimentally. Reviews: In this paper different advances in the numerical modeling of regenerative rotary heat exchangers in relation to fluid flow and heat transfer have been discussed. Researchers have indicated that the effectiveness of the regenerative rotary heat exchanger depends on various factors including, among many others, rotational speed, rotational period and combustion power. It is reported that with the increase of periodic rotation the deviation of theoretical results from the experimental result increases. The available literature indicates that regenerative heat exchangers are having relatively more effectiveness (60-80%), compared to other heat exchangers. It is also observed that the finite difference method and finite volume methods are mostly used for discretizing the heat transfer governing equations, under some assumptions. Research also indicates that for the effectiveness calculation the ${\varepsilon}-NTU$ method is the most popular and convenient.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.41-48
• /
• 2019

본 논문에서는 추적 레이더시스템의 핵심부품인 L대역 로터리조인트의 설계를 다룬다. 로터리조인트는 추적 시스템 안테나 회전부에 장착되어 회전하는 안테나와 고정된 신호처리부를 연결하는 구성품으로 안테나의 회전시에도 꼬임이 없이 RF신호를 원활하게 전달하는 주요부품이다. 로터리조인트의 신호 삽입손실을 개선하기 위해, 유전체 종류, 급전분배링 형상 및 유전체 형상 등을 다양하게 수정하였다. 제안한 로터로조인트는 해외 도입품과 비교하여 향상된 성능을 확인하였다. 도입품 로터리조인트의 최대 삽입손실은 1.26dB이었으나, 본 논문에서 제안한 로터리조인트의 최대 삽입손실은 0.68dB로 도입품 대비 약 46%정도 개선되는 것을 확인하였다.

• 한국전자파학회논문지
• /
• 제30권2호
• /
• pp.173-176
• /
• 2019

본 논문에서는 밀리미터파 탐색기에 적용 가능한 Ka-대역 도파관 로터리조인트를 설계 및 제작하였다. 제안된 로터리 조인트는 낮은 정재파 비와 저손실 특성을 유지하며, 방위각과 고각 회전이 가능하도록 하는 두 개의 회전축으로 설계되어 있다. 또한 구형 도파관과 원형 도파관 사이에 전파 모드를 정합하기 위한 리지 도파관 형태의 모드 변환기와 ${\lambda}/4$ 길이의 초크 구조로 로터리 조인트를 설계하였다. 제작된 로터리 조인트의 성능은 회로망 분석기와 고출력 송신기를 이용하여 확인하였으며, 진동/충격 시험을 통해 신뢰성 검사를 수행하였다. 그 결과, 중심 주파수$(F_C){\pm}500MHz$의 대역에서 최대 정재파비 1.19 : 1 이하, 삽입손실 0.80 dB 이하의 우수한 특성을 갖는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.891-895
• /
• 2005

Novel structure ultrasonic motors which have cross type stator were designed and fabricated. Driving characteristics of the motors were analyzed and measured by changing the materials of the stator. This ultrasonic motor has stator with hollowed cross bar and the stator rotate the rotor using elliptical displacement of the inside tips. This motion is generated by lateral vibration mode of cross bars. This stator was analyzed by finite element analysis depandent on stator's materials. And the cross type ultrasonic motors were made by analyzed results. The larger displacements were obtained, when the density of material was decreased. But the stress was increased when the stator's material has large density and Young's modulus. The fabricated one has high speed and torque in large stress on contact point between rotor and stator. The stress was more effected on speed and torque than the displacement.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.445-456
• /
• 2000

A can type high-speed transplanting mechanism was developed. The mechanism consists of a cam and an epicycle gear train with one sun gear in the middle and four planet gears in a row but symmetric with respect to the sun gear. Two planting knives are pivoted on the two outer gears. When sun gear rotates with a constant velocity the planting knife rotates also with a constant velocity. This constant motion of the transplanting knife is accelerated partially by a cam fixed in the gear housing so that the locus of the planting knife becomes similar to that generated by a crank-type transplanting mechanism. This cam-type transplanting mechanism can solve the problems associated with the rotary-type transplanting mechanisms. The mechanism was designed with an aid of computer simulation and proved applicable to high speed transplanters by its mock-up model. The design process of the mechanism was presented and dynamic analysis was also carried out to show the advantages of the mechanism over the rotary type high-speed planting mechanism.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2011년 춘계학술대회 논문집
• /
• pp.97-104
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.709-710
• /
• 2012

• Tribology and Lubricants
• /
• 제17권1호
• /
• pp.22-27
• /
• 2001

This paper presents an analysis of eccentricity ratio of rolling piston using mobility method which is a powerful tool for analyzing dynamically-loaded journal bearings with efficiency and applicability. And, we investigate influences of design parameters (discharge pressure, radial clearance, rotational velocity of shaft, and eccentricity of compressor) on bearing load and eccentricity ratio. The results show that the discharge pressure, radial clearance and rotational velocity of shaft have significant influence on eccentricity ratio, and the discharge pressure and eccentricity of compressor have influence on bearing load.