• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.349-352
• /
• 2007

본 논문은 계층적 공정 경쟁 유전자 알고리즘(Hierarchical Fair Competition-based Genetic Algorithms : HFCGAs)을 이용한 회전형 역 진자 시스템의 최적 2-자유도 제어기 설계를 제안한다. 비선형이며 불안정한 운동을 하는 회전형 역 진자 시스템은 회전지렛대(rotating arm) 위의 폴(pole)이 적당한 제어력이 없는 상황에서 중력에 의해 어느 한 쪽 방향으로 넘어지려고 할 때, 외부에서 회전지렛대에 힘을 가하여 회전지렛대의 특정위치와 폴의 각도를 유지시키는 시스템으로, 본 논문에서는 두 개의 피드백 제어루프를 갖는 2-자유도 제어기를 구성한다. 각각의 제어기는 PD 제어기로 구성하고, 조기수렴 문제를 내재하고 있는 기존의 유전자 알고리즘의 해결방안중 하나인 HFCGAs를 이용하여 최적의 제어기 파라미터들을 구한다. 마지막으로 실제 공정에 적용하여 설계된 제어기의 성능을 평가한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.383-388
• /
• 2007

This paper considers a low-order dynamic output feedback controller design problem. Since the proposed control law inherently has a low-pass filter property, it can alleviate the mal-effects of the sensor noise without additional filter designs. Frequency domain analysis shows the characteristics of the proposed control law against measurement noise. The effectiveness of the proposed control law is illustrated by numerical simulations with a rotary inverted pendulum and a convey-crane. Using only one integrator the proposed control law has the advantage to the stabilization problem with sensor noise as well as it can successfully replace the measurements of derivative terms in a state feedback control law.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2196-2198
• /
• 2002

Fuzzy controller design consists of intuition, and any other information about how to control system, into a set of rules. These rules can then be applied to the system. It is very important to decide parameters of IF-THEN rules. Because Fuzzy controller can make more adequate force to the plant by means of parameter optimization, which is accomplished by learning procedure. In this paper, we apply adaptive fuzzy controller designed to the Rotary Inverted Pendulum.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.681-683
• /
• 1998

Fuzzy Inference System is to trans late and be concrete with human expert in to mathematical equation. It is easy to be applied for Nonlinear System and the know ledge can be applied at that. With using the rule according to the Knowledge, when it is realized simulations must be required repeatedly and small vibration is generated in steady state, too. In this paper, we applied the system to the methodology of optimization with self-learn ing by us ing ANFIS(Adaptive Network-based Fuzzy Inference System) which makes use of back-propagation and least square method at a first order Sugeno Fuzzy System. In order to show the effect of Algorithm, we demonstrated it by us ing Rotary Inverted Pendulum.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2240-2242
• /
• 2001

A rotary double inverted pendulum, the nonlinear system has a regulation problem. In this paper, we linearize the nonlinear system at the upright equilibrium position. The linearized system can be expressed in state space. To maintain the upright position, we design a feedback controller using LQR(Linear Quadratic Regulator) algorithm. Then we simulate the system with third-order Adams Bashforth Moulton Method. The simulated result shows that the applied algorithm is effective for the regulation problem.

• Annual Conference of KIPS
• /
• 2019.05a
• /
• pp.493-495
• /
• 2019

제어 분야의 가장 기초적인 시스템인 Rotary Inverted Pendulum 을 제어하기 위하여, 본 논문에서는 강화학습에서 Deep Q-Network 과 함께 대표적인 알고리즘으로 알려진 Asynchronous Advantage Actor-Critic 을 활용하여 다중 디바이스 제어를 설계한다. Deep Q-Network 알고리즘을 활용한 기존 연구와 동일한 방식으로 실 세계의 물리 에이전트와 가상 환경을 맵핑시키며, 스위치를 통하여 로컬 에이전트와 글로벌 네트워크 간 통신을 구성한다. 본 논문에서는 분산 Asynchronous Advantage Actor-Critic 을 이용함으로써 실 세계의 다중 에이전트 제어를 위한 강화 학습의 활용 가능성을 조명한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.510-513
• /
• 2005

Due to the asymptotic property, deadbeat control can hardly be applied to the continuous time system control. But some delay element method can deal such a problem. Besides delay element method, well-known digital deadbeat control can be used by the aid of some smoothing elements. In this paper, 2nd order smoothing element is used for the smoothing of the digital deadbeat controller. And this element is argumented to the plant, and so control problem is to control the argumented system digitally. We simulated this control system using Matlab language and finally apply this algorithm to the rotary inverted pendulum system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.108-113
• /
• 2004

Due to the asymptotic Property, deadbeat control can hardly be applied to the continuous time system control. But some delay element method can deal such a problem. Besides delay element nan well-known digital deadbeat control can be used by the aid of some smoothing elements. in this paper, 2nd order smoothing element is used for the smoothing or the digital deadbeat controller. And this element is argumented to the plant and so control problem is to control digitally the argumented system. We simulated this control system using Matlab language and finally apply this algorithm to the rotary inverted pendulum system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1066-1073
• /
• 2014

This paper presents a new design method of optimal control of system which are changed the system parameters. The method used for this purpose are the Lagrange interpolation method and Pole's Moving range method. We selects a system within the scope of the changing the system parameters. Using pole's moving range we calculated the state weighting matrix of optimal control. The optimal controller is designed by Lagrange interpolation method of the state weighting matrix. We are compared with a traditional optimal controller and proposed method by simulation. The simulation showed that the proposed method is better control performance than traditional method of optimal controller.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2039_2040
• /
• 2009

본 논문은 리세트(reset) 제어이론과 상태궤환 안정성 기법을 이용하여 회전식 역진자 시스템의 강인제어시스템을 제안한다. 우선 복잡한 비선형 역진자 시스템을 평형점에서 선형화한 후 상태궤환기법을 이용하여 안정한 모델을 구성한다. 이 선형시스템 모델에서 발생할 수 있는 시스템 섭동으로 인한 실시간 제어오차를 보상하기 위한 리세트 제어알고리즘을 보조제어시스템으로 추가한다. 컴퓨터 시뮬레이션을 통해 제안한 제어 알고리즘의 타당성 및 성능의 개선정도를 분석한다.