• Applied Biological Chemistry
• /
• 제2권
• /
• pp.15-16
• /
• 1961

Distribution of $P^{32}$ in a pot-grown plant of the radish was studied by means of fertilization with phospbate labeled with $P^{32}$ followed by autoradiography of the dried parts. (1) An accumulation of $P^{32}$ occurs in the growth point, the root of hair, the younger leaves and the top of leaves in the radish similary other plants. (2) In the yellow leaves of the radish it was counted too weak by monitor. (3) $P^{32}$ absorbed by the root in radish was transported through the xylem of the radishtissue.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.277-284
• /
• 2018

In this paper, a new numerical method of finding the roots of a nonlinear system is proposed, which extends the conventional fixed point iterative method by relaxing the constraints on it. The proposed method determines the real valued roots and expands the convergence region by relaxing the constraints on the conventional fixed point iterative method, which transforms the diverging root searching iterations into the converging iterations by employing the metric induced by the geometrical characteristics of a polynomial. A metric is set to measure the distance between a point of a real-valued function and its corresponding image point of its inverse function. The proposed scheme provides the convenience in finding not only the real roots of polynomials but also the roots of the nonlinear systems in the various application areas of science and engineering.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.92-96
• /
• 2010

PURPOSE. The aim of this study was to evaluate the thickness of buccal and palatal alveolar bone and buccal bony curvature below root apex in maxillary anterior teeth of Korean adults using Cone-beam CT images. MATERIALS AND METHODS. The 3D image was reconstructed with dicom file obtained through CBCT from 20 - 39 year old Korean subjects (n = 20). The thickness of buccal and palatal plate, root diameter, the buccal bony curvature angle below root apex and the distance from root apex to the deepest point of buccal bony curvature were measured on maxillary anterior teeth area using OnDemand3D program. RESULTS. Mean thickness of buccal plate 3 mm below CEJ was $0.68{\pm}0.29\;mm$ at central incisor, $0.76{\pm}0.59\;mm$ at lateral incisor, and $1.07{\pm}0.80\;mm$ at canine. Mean thickness of palatal plate 3 mm below CEJ was $1.53{\pm}0.55\;mm$ of central incisor, $1.18{\pm}0.66\;mm$ of lateral incisor, $1.42{\pm}0.77\;mm$ of canine. Bucco-lingual diameter 3 mm below CEJ was $5.13{\pm}0.37\;mm$ of central incisor, $4.58{\pm}0.46\;mm$ of lateral incisor, and $5.93{\pm}0.47\;mm$ of canine. Buccal bony curvature angle below root apex was $134.7{\pm}17.5^{\circ}$ at central incisor, $151.0{\pm}13.9^{\circ}$ at lateral incisor, $153.0{\pm}9.5^{\circ}$ at canine. Distance between root apex and the deepest point of buccal bony curvature of central incisor was $3.67{\pm}1.28\;mm$ at central incisor, $3.90{\pm}1.51\;mm$ at lateral incisor, and $5.13{\pm}1.70\;mm$ at canine. CONCLUSION. Within the limitation of this study in Korean adults, the thickness of maxillary anterior buccal plate was very thin within 1mm and the thickness of palatal plate was thick, relatively. The buccal bony curvature below root apex of maxillary central incisor was higher than that of lateral incisor and canine and it seems that the buccal bony plate below root apex of central incisor is most curved.

• 한국터널지하공간학회 논문집
• /
• 제5권3호
• /
• pp.251-260
• /
• 2003

터널 발파에 있어서 진동특성을 규명하기 위하여 브이-컷 심발패턴으로 시험발파를 수행하고, '터널 진행방향'과 '터널 진행직각방향'의 두 방향에서 발파진동을 계측하였다. 최대 지발당 장약량을 기준으로 지반의 진동전달 특성을 확인하기 위하여 자승근 환산거리와 삼승근 환산거리로 회귀분석을 수행한 결과 5mm/sec에서 교차점은 35~45m였으며 터널 진행방향에서 측정한 경우가 터널진행직각방향에서 측정한 경우보다 진동수준과 진동감쇠가 더욱 크게 나타났으며, 근거리에서 이루어지는 터널발파의 경우 삼승근 환산거리 방식으로 설계하는 것이 더욱 바람직하였다. 또한 발파가 없었던 시기에 사전균열조사결과에서는 미소량의 균열이 진행되고 있었으며, 공사기간중 균열조사 결과는 옥외구조물의 균열허용기준치 0.33mm대비 51.5~81.8%였다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• 한국자원식물학회지
• /
• 제22권6호
• /
• pp.584-591
• /
• 2009

Adventitious root culture was established in the Jawahar variety of Withania somnifera using MS basal medium supplemented with 0.5 (mg/l) IAA and 2.0 (mg/l) IBA. Root tips from germinated seedlings, MS0 maintained plants and adventitious roots were maintained in suspension medium (1/2 MS basal medium supplemented with 3% sucrose) for a period of 1 to 6 months. The weight gain in roots was noted and the withanolides were extracted from the dry roots using solvents petroleum ether, 50% ethanol and chloroform. The withanolides in the chloroform fractions of all root samples analyzed were compared using thin layer chromatographic analysis. Withanolide content in adventitious root sample was found to be superior compared to other roots at any given point of time during the 6month growth period.HPLC analysis of in vitro adventitious roots showed the presence of a new compound.

• 대한전자공학회논문지TE
• /
• 제37권5호
• /
• pp.7-16
• /
• 2000

본 논문은 고속 지수 선택기를 이용한 여분 부동 소수점 이진수의 제산/스퀘어-루트 설계 및 구현에 관하여 기술하였다. 본 제산/스퀘어-루트는 처리 속도 25㎒를 갖는 여분 이진수의 가산 방식을 사용하여 올림수 지연을 제거함으로써 비트 크기에 관계없이 일정한 시간으로 가산을 수행한다. 각각의 반복 단계에 널리 사용된 제산과 스퀘어-루트에 대해 16-비트 VLSI 회로를 설계하였다. 이것은 매번 16개 클럭마다 시프트된 이진수를 여분 가산하여 제산 및 스퀘어-루트를 실행한다. 또한 이 회로는 비복원 방법을 사용하여 지수 비트를 얻는다. 지수 선택 논리의 간단한 회로를 구현하기 위하여 나머지 비트의 주요 세 자리를 사용하였다. 결과적으로, 이 회로의 성능은 새로운 지수 선택 가산 논리를 적용하여 지수 결정 영역을 병렬 처리함으로써 한층 더 연산 처리 속도를 높인 것이다. 이전에 동일한 알고리즘을 사용하여 제안된 설계보다 13% 빠른 속도 증가를 보였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.154-154
• /
• 2019

Characterization of reliable field-scale root-zone soil moisture (RZSM) variability contribute to effective hydro-meterological monitoring. Although a promising cosmic-ray neutron probe (CRNP) holds the pontential for field-scale RZSM measurement, it is often restricted at deeper depths due to the non-unique sensitivity of CRNP-measured fast neutron signal to other hydrogen pools. In this study, a merging framework relied on coupling cosmic-ray soil moisture with a representative additional RZSM, was introduced to scale shallower CRNP effective depth to represent root-zone layer. We tested our proposed framework over a densely vegetated region in South Korea covering a network of one CRNP and nine in-situ point measurements. In particular, cosmic-ray soil moisture and ancillary RZSM retrieved from the most time stable location were considered as input datasets; whereas the remaining point locations were used to generate a reference RZSM product. The errors between these two input datasets and the reference were forecasted by a linear autoregressive model. A linear combination of forecasts was then employed to compute a suitable weight for merging two input products from the predicted errors. The performance of merging framework was evaluated against reference RZSM in comparison to the two original products and a commonly used exponential filter technique. The results of this study showed that merging framework outperformed other products, demonstrating its robustness in improving field-scale RZSM. Moreover, a strong relationship between the quality of input data and the performance merging framework in light of CRNP effective depth variation has been also underlined via the merging framework.

• 대한치과의사협회지
• /
• 제45권6호통권457호
• /
• pp.362-369
• /
• 2007

The aim of this study was to investigate the effect of the hybrid instrumentation method with ProTaper and ProFile on the change of root canal area and distance from the canal to the root surface after canal shaping. The mesial canals of twenty extracted mandibular first molars having $10-20^{\circ}\Delta$ curvature were scanned using X-ray microcomputed tomography (XMCT)-scanner before root canals were instrumented. They were divided into four groups (n=10 canals ter group). In Group 1, root canals were instrumented by the step-back technique with stainless steel K-Flexofile after coronal flaring. The remainders were instrumented by the crown-down technique with, ProTaper system (Group 2), ProFile (Group 3) or ProTaper (Group 4). All canals were prepared up to size 25 at the end-point of preparation and scanned again. Pre- and post-operative cross-sectional images of 1, 3, 5, and 7 mm from the apical foramen were compared. For each level, change of cross-sectional canal are and distance to the nearest external root surface was calculated using Adobe Photoshop 6.0 and image software program. In the change of cross-sectional area, Group 4 was less than Group 2 at 3 mm and 5 mm level (p<0.05). In the difference of the distance from the canal to the root surface after canal shaping, Group 4 was least among the other groups at 7 mm level (p<0.05). According to the results, the methods using ProFile or K file only and the hybrid instrumentation technique using ProTaper and ProFile are more appropriate methods of canal preparation than ProTaper system for narrow of curved canals.

• Journal of Periodontal and Implant Science
• /
• 제36권4호
• /
• pp.809-816
• /
• 2006

Periodontal disease accompany the inflammation around periodontal tissue and generally periodontal destruction is followed, This destruction often makes the molar teeth have furcation defect. And to treat molar furcation involvement, resective surgery such as root resection and ostectomy and regenerative procedure such as guided tissue regeneration were introduced. Also implant can be considered as one of the good treatment methods, Among these treatment alternatives, root resection can be considered as a good procedure in the point of saving one's natural teeth or amount of cost. Therefore the purpose of this article is to evaluate root-resected teeth which were done at least 2 years ago. 70 root-resected teeth in 58 patient who visited Kyungpook National University Hospital were included in this study. They were evaluated by two clinical method. One is subjective evaluation and another is objective evaluation. To evaluate subjective outcome, 58 patients answered to the questionnaire if they experienced tooth extraction, bleeding, swelling, pain, mobility and chewing problem. To evaluate objective outcome, 28 teeth was evaluated according to Langer's criteria. The subjective result showed 82% of success rate and 18% of failure rate. 13 of 70 teeth showed discomfort and were considered as failure, which include chewing problem (39%) and pain (23%). The objective outcome showed that 4 failure (14% failure rate) which were 2 cases of bone loss by periodontal problem, one endodontic problem and one untreatable caries. By these limited results, some of clinical consideration in root resective procedure can be suggested. Periodontal support and less occlusal loading on resected tooth should be evaluated before the procedure, moreover, good oral hygiene is essential. When these factors are considered carefully, the root resection may produce predictive outcomes in the treatment of furcational involvement.